01 maxima 300zx twin turbo swap
01 maxima 300zx twin turbo swap
hey everyone i just wanted to know if it was possible to put a 90-94 3oozx twin turbo engine into my 01 maxima. i know there the same engines except for the turbos but i heard it was a direct fit and i need to keep my maxima tranny and just change the bell housing is this possible?(to do the swap)
Originally Posted by mensur724
hey everyone i just wanted to know if it was possible to put a 90-94 3oozx twin turbo engine into my 01 maxima. i know there the same engines except for the turbos but i heard it was a direct fit and i need to keep my maxima tranny and just change the bell housing is this possible?(to do the swap)
Originally Posted by mensur724
turbo my 5th gen sounds very pricey i could get the zx engine for 1100 and the rear wheel drive has to do with the tranny which i will be using my maximas
you're talking about. The engine wont mate up to the tranny since the configuraion for the engine is RWD and your tranny is FWD.
ZX ENGINE WONT FIT!
Larrio...
Originally Posted by mensur724
turbo my 5th gen sounds very pricey i could get the zx engine for 1100 and the rear wheel drive has to do with the tranny which i will be using my maximas
Originally Posted by mensur724
im gonna do it and laugh at everyone when i do.............when i have the only one i will be "MAXIMA KING"
Originally Posted by mensur724
im gonna try it out ill check with the dealership i have heard its possible and when i have the only one i will be "MAXIMA KING" lol
Originally Posted by mensur724
by montclair on valley road im gonna do it and laugh at everyone when i do
SCC fully built VG30DETT: 5xx hp (Mike Kojima) - Jan. 2003 and a porky 3600 lbs
rods, pistons, crankshaft, cams, valvetrain, turbos, etc
24 psi and C16 race gas
stock internals VQ30 turbo: 5xx hp (Hal), 4xx hp (Mardi) and a easy 3000-3100 lbs
pump gas (?), less than 20 psi
less weight, short stroke, stout engine
VQ > VG
rods, pistons, crankshaft, cams, valvetrain, turbos, etc
24 psi and C16 race gas
stock internals VQ30 turbo: 5xx hp (Hal), 4xx hp (Mardi) and a easy 3000-3100 lbs
pump gas (?), less than 20 psi
less weight, short stroke, stout engine
VQ > VG
http://www.forums.maxima.org/showpos...0&postcount=13
This should pertain to the A33 as well.
This should pertain to the A33 as well.
Originally Posted by mensur724
im gonna try it out ill check with the dealership i have heard its possible and when i have the only one i will be "MAXIMA KING" lol
The last place on earth I'd trust with advice like this is a dealership, but go for it since you seem to know better than anyone else here in the advanced performance forum. Remember who posted the thread asking the question to begin with.
Originally Posted by nismology
And this thread is still open because.......??
Its open because the mods are currently looking for threads to create a sticky in the General Discussion Forum titled "Quick examples to what will get j00 banned"
For example this thread,
mistake #1- Why are you asking a redundant question that's been asked repeatedly in the past with the same response? that it cannot be done. Did somebody not attempt do do his homework? VG=VQ?
mistake #2- Why are you asking about a VG30DETT swap on the ALL MOTOR forum??
Please prove us wrong
Lord Maxima King
!!!! Long live teh n00b, I mean the King!
ok Im done flaming
For example this thread,
mistake #1- Why are you asking a redundant question that's been asked repeatedly in the past with the same response? that it cannot be done. Did somebody not attempt do do his homework? VG=VQ?
mistake #2- Why are you asking about a VG30DETT swap on the ALL MOTOR forum??
Please prove us wrong
Lord Maxima King
!!!! Long live teh n00b, I mean the King!
ok Im done flaming




..
Can I get a recount?