i am living in scarbough toronto, just got a new job, so i don't have as much time as before to do finish my maxima by myslef, i need some volunteer to help me to finish the job after the work everyday or few days a week. here are some pic of my car

 

lol ummm ... try the regional forums ... and i think you should probably pay the person for their time and skills

 

what on Gods beautiful green Earth did you do to that Maxima ... ?????? the front looks like it has wings ??

 

tried canada fourm, but not many ppl there.
btw, i am building the wid body kid myself right now. i have skill to do it, but just not much time.

 

so far, i finished 90% of the passanger side, starting doing the driver side

 

id help, but im in indiana. what color do you plan on going with? some really nice rims would set it off. its different. how long you've been working on it?

 

i am going to do the whole car with air brush with blue, gold, red, yellow colors, and 19 inch low offset rims with 2 inch wheel spacers,

 

That poor poor Max!

 

so far, i been working on it for around 2-3 month, but the car has been apart for more than 3 years.

 

$hit good help is gonna be hard to find.....lol

 

OMFG??? Why??

 

Wow, that is going to be one wide Max.

 

man this guy sounds a little fishy.. he wants you to come over and "help" but then when u least suspect......

 

Hahahaha no homo!

 

^^^hahaahaahaa, ur crazy f550. lol

but yboy100, check out the canada fourms, you will get me interest in there. its a project, give it time. id like to see a clean widebody max, why not?

 

yeah actually id like to see the finished project ... it is something different....99% of these orgers are usually all doing the same thing like cold air intakes and fstb .... different is good ...i hope it turns out nice

 

check on the torontomaxima web page.
tmec i think? You might have some luck there.
Good luck with the 2" spacers and not blowing your cv joints every month.
Different yes...

 

It's a bird!
It's a plane!

It's a.....Maxima

 

the help mean can help me to push the car or move staff around or some easy jobs, but , anyway, thanks everyone here for help. i hope i can finish the car before spe. for 2" wheel spacer i know it is dangerous, but, i have no choice unless i can find - offset rims.

 

seems like he's trying to make a wide body

 

It looks interesting, but holy hell, don't forget it's just a Maxima. They're great cars and certainly go when you put your foot down, but in the end a Maxima with a widebody is just... well, a Maxima with a widebody. I dunno.

Still interested to see the final outcome though, and besides that you've done pretty well.

 

yeh, i guess you will need some kinda spacer for that. when you're done is it gonna be a show car or daily driver still?

 

i know it is a maxima, but it is my first car in my life, i had the car since brand, now, i just want to do something different, trying to push as far as i can within my buddget,the wide body idea came out from clk-gtr racing car, i know it sounds like a studpid idea, but i can't stop couz the car has been seriously cut and welded, so, i have to keep doing on it ..

 

for sure it will be a show car, i don't think it can handel daily driving anymore.

 

iono, i've seen many wide body cars on the streets

 

but with 2 inch space, i don;t think the wheel hub, baring, and cv joint can handel it.

 

wow...it takes b@lls to do that...forget the spacers, try to get a nice offset rim to make it flush to the wider wheel well and see how that goes. I mean, if you are going to spend that much effort into the body, might aswell put the $$$ for the rims. It'll be worth it(not $$$ wise but pride wise) to put the big rims on it, for looks and functionability(a must). Go to shows and stuff and that's it. Keep it on car stands for the winter and you're set. I'd love to help, but body work isn't my skill. good luck and hope to see it finished soon

 

if you come to miami......i can definitely get you da help. ive done a widebody on a bmw325i before and dat shyt came out sick,

as far as your rims....if you can get the rims wide enough to sit flush with ur fenders do that instead of using ur 2inch spacewrs. itll loooookkkk soooooo much better!!!

but i highly doubt ur gonna drive down here.

 

thx everyone, can anyone help me to find a set of 19" wheels with 0 or even smaller offset? otherwise , i have to use 2 inch spacer kit.
thx again.

 

just get some 10" wide rims?

 

The **** is that?

 

THAT THING IS UGLY.. I thought I'd seen some wide fenders on 350z's, G35's and BMW's, but wow you took it to a higher level, like an airplane.

 

lmao..that was funny!! i would really like to see how this max gonna turn out maybe u be the first to have a wide bodykitted maxima which is pretty cool.
you gonna have to put some wide *** wheels on that bad boy to make it stand out. keep us posted and GOODLUCK!!

 

It's got potential.

 

yeah to be the first nissan airplane..

 

as already stated check the regionals. What are you plans for wheels? Since you have a much wider fende you can go with 9 and 10" wide wheels, and the option of going much lower than a 35mm offset.

__________________________________________________ __________________________________________________ _________
Make a thread when you complete the project. Many have various opinions and comments about it, but a master piece isnt a master piece until its completed, so I'm not making any comments on it till I see the finished product. A lot of car half way thru a body project look like crap, till its done, prepped, painted then you'll see if their vision was a good one.

Good luck.

 

I think that once it is finished it will look good, but until then it is a work in progress. Good luck man, hope it turns out well

 

as long as the guy likes it. its his car anyway

 

y boy, you crazy.. if you get wheels that fill up the wheelwell, you know that there's gonna be hella tire rub in turns right? those things will swing so far back and forth in turns its not even funny... as of neg offset... you can just turn the wheels inside out!

 

Man, I totally applaud the effort. And what someone else said is true - every Max has just about the same standard mods - you are pioneering something and I hope it works out for you. It's crazy to judge it at this point - it's so far from being finished.
That said, if it turns out like cow dung - we don't know you lol. j/k Keep up the good work!