My 2000 Maxima is being parted out. I've decided to move on based on building a Precision SC61 Powered 93 Nissan Sentra SE-R, and fully built SR21DET once tuned should provide enough fun, but ultimately I have made a pre-order for the 2007 NisMo 350Z in Pikes Peak White. One car has to go, and it's gonna be the Maxima. I will still be around to answer diag questions, and warranty coverage questions, but it's time for the list of parts I have, and what needs to be sold ASAP.

I feel as if the prices listed below are reasonable, please no low ball offers, they will be ignored.

STILLEN S/C w/3.25" Pulley, GReddy Emanage Blue w. USB hardware and software. I will post pics once I sort out all the bolts and hardware for the kit. (HKS SSQV will not be for sale.) I do have drain back, and modified thermo housing. All lines for fuel pump, oil feed and drain will be available. I do not have the P/S hose extensions. FMU has a 10:1 disc. This kit is a STILLEN V1 along w/ plate, so less belt chewing. I am currently having a local Vortech dealer service the blower.(No oil blow by at all in pipes.) Includes single DIN gauge bezel to house (2) 52mm gauges and 2 switches.
*********S O L D**********

PWR Air to Water Intercooler 6x8 w/ 3" openning, setup includes Fluidyne heat exchanger, Meizere Water pump w/ 3/4" hose inlet outlet to PWR A2W setup. Liquid container not included with this sale, as it was custom formed plastic behind my drivers headlamp.
Asking: $550+shipping, or $550 picked up NYC.

ZEX Dry Nitrous System w/ Purge system, Cold Fusion Nitrous filter, and alot of pills.
Bottle has heater. Everything was hardwired using Cruise Controls on Steering wheel, so I do not have harnesses.
All working condition, all tested using Power probe III.(Nitrous electrical gauge sold.)
Asking $380+shipping, $380 picked up.

DEFI Fuel Press Electric Gauge: ****SOLD****
DEFI A/F Ratio Gauge ****SOLD****
My Dash shot up close for gauges.

Apexi RSM w/o G Sensor: $150+shipping or $150 picked up.
Click for Apexi RSM For Sale

Precision Brakes BBK Front
12.9 One piece slotted/drilled discs, Wilwood Dynalite Calipers, with Hawk Street Pads(less than 3K mi)
I am NOT looking for trades for stock brakes.
(Blehmco rear kit sold already, local nycmax'r, matches his Blehmco Front kit.)
****SOLD*****
D2 Coilovers brand new 8K/6K Springs, unless you really want 9K/7K setup I am running, shocks on coilovers have less than 4K mi since D2 warrantied them (finally after fighting with them long enough.)
*****SOLD*****

STILLEN Sway Bar (If I can get it off cleanly)
*****SOLD*****

Paradox-Systems FSTB, Alutec* Hallow bar for A33 Looks super trick~!
Asking: $100+shipping or $100 picked up NYC

Carbon Fiber Hood: Brand New, still wrapped, from TC Concepts.
****SOLD****

Carbon Fiber Trunk: VG shape, made originally by Ionic Dynamics.
Asking $400+shipping or $450 picked up.
****SOLD****

================================================== ================

Just added:

Hunsaker Sports Seats, front drivers and occupant w/ A33 brackets:
$320 local picked up. Shipping up to buyer.(49 lbs/ ea.)
These seats are in mint condition w/ A33 brackets~!
I recommend these for a Base model SE owner w/o side air bags or heated seats/ GXE owners.

AVIC N2 w/CNDV-60 MP v1.2 DVD updated.
* * * * * S O L D * * * * *

Energy Suspension Lower Control Arm Bushings P/N A33 7.3118
Asking $45+shipping. $45 picked up.

Energy Suspension Rear Axle Beam Bushing P/N A33 7.7108
Asking $65+shipping. $65 picked up.

Blehmco Lower Tie Bar Stage 2. Brand New, never cleared by DP setup, and it has collected lots of dust.
Asking $170+shipping. $175 picked up.

Blehmco Front BBK w/ two piece rotors, Z32 calipers are on my Pathfinder now, so :-P
Only thing needed to complete the kit is 30mm Aluminum "Sumitomo" Z32 TT calipers.
*****SOLD*****

4th gen front and rear seats, in grey cloth. Decent shape. A few cig burns from previous owner.
Would be a good set of seats to add leather to if you were inclined to.
Asking: $150+ shipping(hope you are sitting down when you get price quote) or $150 picked up.(neg) ??

(1) 6000K H4 Hi Lo Bixenon Kit. Brand new in box.
* * * * * S O L D * * * * *

(2) H3 HID kits, (1)6000K, (1) 8000K, Brand new, purchased them for my PIAA foglamps, but I discovered Sylvania Xenarcs w/ remote controls.
Asking: $175 shipped/ea. or $160 picked up/ea.

03 R50(Pathfinder VQ35) Bare heads w/ OEM valvetrain, 3 angle valve job, sodium filled exhaust valves.
(May have to be re-shimmed for OEM cams.)
Nismo cams, and JWT spacer
* * * * S O L D * * * *
JE Pistons 8.5:1, and Eagle rods
* * * * S O L D * * * *

================================================== ========================

ADDITIONAL ITEMS FOR SALE ~!!!!!!! W/PIX as of 5/13/07

Wheels and Tires For Sale in Addition to the Part Out Above

 

Question...

Can I buy and pick up when I'm back in the states?
I'm overseas now and won't be back till June. Let me know.

interested in:
- Paradox-Systems FSTB, Alutec* Hallow bar for A33
- Carbon Fiber Hood
- Carbon Fiber Trunk

Thanks,
Anthony

 

Depends on how soon you will be back and how soon a buyer whom is local can literally drive to my house, work place or shop and get it on the spot.

 

tempted on ur v1 kit... after i went to the tracks.... ughhhhh being a spectator sucks...

 

btw quik question... i have the gle and i do use my 16s during the winter... will i clear ur bbk?

 

will the d2s fit my 03 max? anything wrong with them?

 

ok, how much is shipping to NJ 07621 for ....

Blehmco Lower Tie Bar Stage 2. Brand New, never cleared by DP setup, and it has collected lots of dust.
Asking $170+shipping =?

Paradox FTB.
100+ shipping = ?

Thanks.

PS. What i meant was i'll send payment and ill swing by next month.

PPS. Would you know if the LTB2 fits an automatic? I know the LTB1 does fit if you lift the LCA up.

 

The cf trunk is for the 2k max? Any damages.

 

i'll take both the cf trunk and cf hood for 500 + shipping to 01720 comercial address. let me know...oh and bump for good deals. i wish i had more $ on hand or i'd take your coilovers and BBK too...

if shipping is alot i'll just drive out and pick em up assuming flushing, ny is not in east bum.

 

yhpm hogan...

 

pmed you for the hood can pick it up 2day

 

Yo Hogan.. you know since i gave you pretty good pricing on things i sold to you... what can you do for me about that SC? haha =)

 

To all buyers, these is no such thing as dibs in this case, I just want to move all my stuff out of my shop immediately cause with a SR22VE(T) being assembled as my back up motor, and working on my Sentra, I have limited space.

KabirUTA13, 16s will not fit the BBK at all. I think the only 16" wheel that cleared were TechnoMagnesio ??? Confused had them with drag slicks and I have the same BBK setup.

maximo-SE, D2S are mint nothing wrong, just drove out to Long Island, and out to MD-VA area for a small road trip to meet a few friends.

gxe2se, never got a chance to put it on my car, cause when I tried smacked
right into my downpipe. My car is auto, so I cannot confirm if it fits.

2kprlmax, minor scuff on edges, all edges have been UV expoxied and smoothed over.

Torgus, shipping for these items is insane, I've been quoted $96 for trunk and $135 insured for the hood to CA, which is a worst case scenario. I would suggest a pick up with an SUV.

mynesbts, 98MaXeDouT about to PM you guys back.

A33 VQ30DEK, LoL, considering how long it took me to assemble the S/C kit with all the bolts and hoses and a few fittings, I'm glad I am getting rid of this. The Sentra is driving me insane with building a bulletproof head.

 

hook a brotha from another motha up with that d2 setup!

ummm....lay-a-way? LOL yeah i'm ghetto like that

oh yeah, u gotta install them too, lol

 

lol, when it boils down to it, cash rulezzz, its all first come first serve.

 

500 picked up for both trunk and hood.. lemme know can pick up this weekend

 

ill take the hood no madder what for 200 picked up

 

Hey Nismo! Im at bayside and intrested in some of your parts. Email me at cashflo718@gmail.com with your name and #. I gotta ask you a few things

 

sickmax, already having the CF hood picked up tonite

cashflo, you cannot recieve PMs ???

 

can i still get the trunk?

 

good seller. buy all his stuff!

 

not buying but interested in pics of that S/C

 

Torgus, yeah trunk is available.

xnyc, enjoy the body kit, nice easy install huh ??

meccanoble, waiting for the blower to get back from rebuild, opted not to get the blower polished as they would charge a boat load.

 

Double Post,,,

 

quick shots before i separated blower to send to get rebuilt.

FMU/ Fuel Pump shot

blower/ bracket, belt.

Z32 Maf I used in my car, and I may be using the EManage Blue, as I am deciding to lower price of blower.

 

more items added from garage.

check http://forums.maxima.org/showthread.php?p=5695484
for wheels and tires that need to be moved out.

STILLEN Bar SOLD, just picked up.

 

Yo Hogan if i get the SC would you install it?

 

nismo do u still have the hid kits for the fogs the 8k burn? let me know? am in NYC. pm me the details hardware n all u have?

 

would like to see pics of the CF trunk...

 

Ride2K, I could, but it would be a few weeks, say 2nd week of June for me to start the install.

jkmay01, yeah I have the H3 8000K sitting in shop in Bronx. What specifically do you need ? hardware ? ( if for kit, has nuts, bolts and brackets)

Torgus, very soon, working 12hrs+/day at Nissan is non stop for me, and Saturdays kill me at 10 hrs/day.(I wish I slept that much at times.)

 

Do you have any pictures of the seats ? 5th gen ones you are selling...

 

Pics posted of trunk, avic N2, and a few other items.

Tire/Rim pics are up in the 2nd thread.

 

Camera ran out of batteries, more than likely tommorow night

 

i'm all set with the trunk. i have other things to fix at the moment. bump for a good deal.

 

boomp, need the stuff out, willing to negotiate a deal, PM me please.

 

do you have a rear sway bar?

 

as far as hardware bulbs, ballasts, are my may concern. mounting hardware if you still have that also? What part of bronx? I am in harlem 114th and st nicholas. let me know?

 

bump for Hogan...ugh I still wanted that hood =/

 

ok just wanted to know what do you have from the kit for the fogs? bulbs, ballasts mounting kit? let me know? thanks

 

your selling my blower? lol...

well best of luck to it and its new home/owner...it is a great kit with some cool extras....