FS: FS: COMPLETE 5-speed swap part-out
Thread Starter
Senior Member
iTrader: (2)
Joined: Apr 2007
Posts: 357
From: from the Brickz NJ to H-town, TX
FS: FS: COMPLETE 5-speed swap part-out
EDIT: WHOLE SWAP SOLD! MODS CAN LOCK
sup peoples, getting rid of my 5-speed swap simply because im not financially able to complete this ultimate mod I was always dreaming of. You absolutely wont need A THING to do the swap, everything is here. here's the list:
- 5 speed tranny, 80k miles on it NON-LSD ($500)
- support rod +control rod ($100 for both, includes shifter)
- shifter (selling with control +shift rods)
- brake pedal ($40)
- clutch pedal ($40)
- OEM flywheel ($50)
- OEM clutch ($50)
- slave cylinder
- master cylinder
- manual motor mount (selling with tranny)
- all nuts and bolts needed
- 1 manual driver side axle ($60)
- 1 starter, 70k miles on it ($65)
EXTRA GOODIES I BOUGHT FOR THE SWAP
-EXEDY STAGE 1 clutch kit BRAND NEW ($120)
-5 quarts of Amsoil GL-4 gear oil ($50)
-Stainless Steel clutch line ($25)
-300ZX shift boot and universal shift **** ($10)
-Unorthodox lightweight underdrive crank pulley (SOLD!)
since everything ranged me nearly $1200 i'll be kind and let this go for $800 for the complete swap. If someone already buys a part before the complete swap being sold this will be a definite part-out! pm me your zip code for shipping quote or local pickup, im located in Newark,NJ (25 mins from NYC). Thanks for lookin fellas.
EDIT: Unorthodox UDP SOLD!
[img]http://usera.imagecave.com/mac187htown/ForSale/mymaxima1052.jpg
[/img]
sup peoples, getting rid of my 5-speed swap simply because im not financially able to complete this ultimate mod I was always dreaming of. You absolutely wont need A THING to do the swap, everything is here. here's the list:
- 5 speed tranny, 80k miles on it NON-LSD ($500)
- support rod +control rod ($100 for both, includes shifter)
- shifter (selling with control +shift rods)
- brake pedal ($40)
- clutch pedal ($40)
- OEM flywheel ($50)
- OEM clutch ($50)
- slave cylinder
- master cylinder
- manual motor mount (selling with tranny)
- all nuts and bolts needed
- 1 manual driver side axle ($60)
- 1 starter, 70k miles on it ($65)
EXTRA GOODIES I BOUGHT FOR THE SWAP
-EXEDY STAGE 1 clutch kit BRAND NEW ($120)
-5 quarts of Amsoil GL-4 gear oil ($50)
-Stainless Steel clutch line ($25)
-300ZX shift boot and universal shift **** ($10)
-Unorthodox lightweight underdrive crank pulley (SOLD!)
since everything ranged me nearly $1200 i'll be kind and let this go for $800 for the complete swap. If someone already buys a part before the complete swap being sold this will be a definite part-out! pm me your zip code for shipping quote or local pickup, im located in Newark,NJ (25 mins from NYC). Thanks for lookin fellas.
EDIT: Unorthodox UDP SOLD!
[img]http://usera.imagecave.com/mac187htown/ForSale/mymaxima1052.jpg
[/img]
Last edited by 97maxdaddy; Nov 21, 2007 at 12:14 PM. Reason: SWAP SOLD!
Thread Starter
Senior Member
iTrader: (2)
Joined: Apr 2007
Posts: 357
From: from the Brickz NJ to H-town, TX
then i hope u get REALLY REALLY lucky finding that buyer....unless the case is that you want to sell everything but then again you dont? lol w/e im still here if you decide to sell those 2 parts.
Thread Starter
Senior Member
iTrader: (2)
Joined: Apr 2007
Posts: 357
From: from the Brickz NJ to H-town, TX
really really lucky? lol.. dawg w/e its not like im in a rush to sell this so learn to read a thread b4 u start askin for partouts. thanks...
mods can u kindly clean this up b4 it starts getting whored again...
Last edited by 97maxdaddy; Oct 20, 2007 at 05:52 PM.
Thread Starter
Senior Member
iTrader: (2)
Joined: Apr 2007
Posts: 357
From: from the Brickz NJ to H-town, TX
Thread Starter
Senior Member
iTrader: (2)
Joined: Apr 2007
Posts: 357
From: from the Brickz NJ to H-town, TX
800 would be the LEAST i can go honestly man... i spent nearly 1200 for everything and full swaps hardly ever go for under $1000. I'll take your price but leave me with the EXEDY stage 1 clutch and the UDP, sounds fair? you'll still have the OEM clutch/flywheel in great condition so you should be fine. lemme know bro...
Thread Starter
Senior Member
iTrader: (2)
Joined: Apr 2007
Posts: 357
From: from the Brickz NJ to H-town, TX
ya its like i wanna keep it but then again i dont have much funds at the moment to go ahead with it, thats the only thing holding me back lol... so right now the offer is still in the air, if it sells it sells, if not i'll still keep it and just save up... im in no rush so if your interested just gimme a holla whenever.
shhhhhhh lol
I am right like 10 minutes from Newrark. I just need the manual gear cover that has the shifting pattern
1 3 5
N
2 4 R
Believe it or not, the sole reason I failed the inspection was because I don't have the shifting pattern on the shifter.
1 3 5
N
2 4 R
Believe it or not, the sole reason I failed the inspection was because I don't have the shifting pattern on the shifter.
I think you have to make up your mind 1st, every week it's somthing new
it's for sell, sorry nope installing it, then opps sorry it's for sell , sorry keeping it
I would have bought the kit but back when you made the 1st thread, just keep work some o/t get your car fixed and hope you get enough money for xmas to get the kit installed
it's for sell, sorry nope installing it, then opps sorry it's for sell , sorry keeping it
I would have bought the kit but back when you made the 1st thread, just keep work some o/t get your car fixed and hope you get enough money for xmas to get the kit installed
Thread Starter
Senior Member
iTrader: (2)
Joined: Apr 2007
Posts: 357
From: from the Brickz NJ to H-town, TX
I think you have to make up your mind 1st, every week it's somthing new
it's for sell, sorry nope installing it, then opps sorry it's for sell , sorry keeping it
I would have bought the kit but back when you made the 1st thread, just keep work some o/t get your car fixed and hope you get enough money for xmas to get the kit installed
it's for sell, sorry nope installing it, then opps sorry it's for sell , sorry keeping it
I would have bought the kit but back when you made the 1st thread, just keep work some o/t get your car fixed and hope you get enough money for xmas to get the kit installed
Last edited by 97maxdaddy; Nov 15, 2007 at 07:03 AM.
Joined: Oct 2005
Posts: 4,572
From: Middleboro/Carver, Ma
- support rod +control rod ($100 for both, includes shifter)
- shifter (selling with control +shift rods)
- clutch pedal ($40)
- slave cylinder
- master cylinder
-300ZX shift boot and universal shift **** ($10)
DIBS on these, comes out to $150 plus whatever you want for the master & slave's, $60 sounds fair to me. Let me know shipping quote to 02346. Thanks
- shifter (selling with control +shift rods)
- clutch pedal ($40)
- slave cylinder
- master cylinder
-300ZX shift boot and universal shift **** ($10)
DIBS on these, comes out to $150 plus whatever you want for the master & slave's, $60 sounds fair to me. Let me know shipping quote to 02346. Thanks
Thread
Thread Starter
Forum
Replies
Last Post
hez8813
5th Generation Maxima (2000-2003)
11
Mar 12, 2020 12:06 AM
KabirUTA13
5th Generation Classifieds (2000-2003)
19
Oct 17, 2015 02:15 AM