Prices and pictures are currently up, however they aren't in this thread due to maximum picture thread allowance? But yeah, seriously they are in later threads, pictures, prices and I will go into the detail more with the information, so your not having to go back and forth. If you have ANY questions about availability, quality, condition, or if you just want to plain ole try to low ball me, PM me and we'll see, or as always post here.
I.C.E.:

7" Microvision Screen - Molded Into Factory Trim.
Audio Control - Epic 160 SOLD!
Audio Control - EQX SOLD!
Mobile Spec - 12 Farad Capacitor SOLD!
Memphis Audio - Mojo Amp
MTX - 9500 12" with or without single slot charcoal carpeted box
Hornet - 564T, (2) 529T's, and (1) 530T.
Pioneer - DEH-P850MP SOLD!
Mobile Spec - Red/Black 16 awg. twisted wire
Moster Cable - Battery Terminals SOLD!
Streetglow - Red neons. I think there is 2 20" tubes, a couple packs of El Wire and a strobe light or two, all red.
Sound Deadner - I believe its Fat Mat, I forgot, it should be more than enough to do an entire trunk. SOLD!

Exterior Lighting:

Stock tails that had the red/white mod done to them.SOLD!
Set of Altezza tails that the inner tails were painted black to look like IS300.
Set of Clear Corners.SOLD!
Set of Sylvania Silverstars

Suspension/wheels:

20" Axis Millano +'s 4 wheels mounted with 75% left on tires, comes with 3 extra tires, 2 are perfect about ~50% on them, one has a little inner wall wear ~30% on it, as well 2 spare wheels that have been sand blasted, perfect for spares, could be refinished to new.

2 front struts - KYB AGX ~ 8,000 on them.SOLD!
4 Eibach Pro Springs ~ 6,000 on them. SOLD!
Set of Gorilla Locks I believe they are 12x1.25, whatever is for a 4th gen Maxima comes with 2 locks and a few extra lugs
Set of 12x1.5 lugs, came off of a 350z.

Interior pieces:

Have a couple odd and end pieces, a couple cup holders, center dash bezels, pockets for under the CD player, two pockets with a door for under the CD player, etc, etc, etc.

All offers will be considered. But be serious here, I take GOOD care of EVERYTHING I own, so you won't be receiving junk, and I will let you know about the full condition of the piece/part/whatever if you ask, we are a community, I am not tryin to rip my fellow people off.

 

Might wanna post it in a few days. Thought they locked everything that didnt have location,price or pics. How much and a pic of the monster terminals please. Same for the lugs.

 

I am going to try my best to get it all on here in the morning, however I like to over shoot, instead of saying I will have them up in the morning, and not. I will get you a picture and price ASAP. Again, I'm sorry about this, but there is just so much stuff.

 

Hey, how much for the sound deadner, and how old is it?

 

howw much for 2 front struts?

 

how much for the springs?? and microvision screen?

 

I have had it for probably 6 monthsish give or take, the guy I bought it from had it for a few months and was just laying around after he finished his car. So I would be content with saying under a year. But I am not sure. PM a price. I will ship it of course.

 

Someone said they would pay $115 for them. PM if you would like to talk about it.

 

Springs someone offered $200.00 for. Microvision I'd say $250.00 its been molded into the factory piece and looks very nice.

 

ill pass on the microvision. Thanks and if you can get 200 for the springs from someone be my guest its more than i am ready to pay. G/L with the rest of your sale

 

Its been 2 days, you don't have prices or pics on this thread....

 

I attempted to do it this afternoon, however I added all the pics and changed everything, and then a prompt decided to pop up that limits me to 5 pictures, as doing the adjusting to the thread was taking away from an exam I had tonight, I figured I would do it at a later time. I.E. Now.

 

instead of posting a picture, you could just post the link to the picture, then you can add all the links to every item.

 

I.C.E.:

Molded 7" Microvision screen, that was molded into the factory trim piece. And a trim ring for a CD player was molded into the single din so the head unit could be recessed. Asking $250.00.



Audio Control - Epic 160 - I used this for 5 or 10 minutes, and this is probably the coolest audio piece I ever owned, def. worth the investment, if you like bass and want to know your SPL's, voltage withdrawal, etc... MSRP - $300.00 asking $150.00.


Audio Control - EQS - NEVER used, didn't get to the that part of the install where I could hook it up, so its brand new, if your wanting a top of the line system, you have to have an equalizer, this one comes a 13 band, with front/rear/sub fader, line driver, has 6 inputs and 6 output channels. If you know Audio Control, you know quality and the benefits of their products. MSRP - $350 asking $200.


Mobile Spec - 12 Farad Capacitor Brand new as well, comes with a pair of cotton gloves. Has a bright blue display, very nice. MSRP - $200.00 asking $125.00.

 

Memphis Audio - Mojo Amp - if your TRUELY interested and can talk me into letting it go, I will sell it. MSRP - $1500.00 would take $500.00.

MTX - 9500 12" with or without single slot charcoal carpeted box. Looks like I had shirts or something up against it. But it is totally cosmetic. This thing POUNDS, and beat the 12W7 on the stats chart. Don't want to sell, but if the price is right, I'll let it go. Doesn't have many hours used on it, I'd day less than 40. And as with all my stuff, never abused. MSRP - $400.00 asking $175.00 (would prefer to deliver or meet)



Hornet - 564T. I was running (2) 529T's one for the front windows, and one for the rear windows, also bought, but never installed a 530T for the sunroof. The alarm is wired up for a Maxima, but you may have to extend the wires a little bit because they were cut at the connections. Antenna is broken on the remote, but works fine, just doesn't have the distance it used to. MSRP - Alarm - $400.00, Modules - ~$140.00 so $540.00 asking $200.00.

 

You have the picture of the monster cable terminals?

 

Pioneer - DEH-P850MP - I got it from the original owner, who I am good friends with, for my girlfriend... now ex-girlfriend, and had it in my other car, but since I am selling the Maxima, the "other car" has become my daily driver, so I put a different unit in. This unit works flawlessly, I put a new screen ribbon in it, and have never had a problem other wise. MSRP on this unit was like $700.00 when it came out, asking $125.00.




Mobile Spec - 100 ft. Red/Black 16awg. twisted wire. Some of the nicest wire I have EVER seen/used. It is awesome for show cars, or just to know you have it. Asking $55.00.

 

Moster Cable - Battery Terminals. Brand new. Purchased from Tweeter for my Optima Yellow Top, but the place that does all my automotive repairs didn't hear me say they were in the seat, and instead used a regular set. MSRP on the positive is $25.00 and the negative is $20.00. Asking $25.00 for both.


Streetglow - Red neons. I think there is 2 20" tubes, a couple packs of El Wire and a strobe light or two, all red. Let me find all what I have and I'll go from there. If you need anything feel free to PM me.

Sound Deadner - I believe its Fat Mat, I forgot, it should be more than enough to do an entire trunk. I bought it to do my trunk off of a guy who did his car, and just never got around to doing it. Asking $20.00 SOLD!

 

Exterior Lighting:

Set of Stock tails that had the red/white mod done to them, two minor cracks on the outer edge, no one ever noticed them when I had them on. Asking $40.00. SOLD!




Set of Altezza tails that the inner tails were painted black to look like IS300. There is a piece that is broken off on one of them, but could be filled with some black caulk or something and it would never be noticed. Asking $40.00.

 

does the monster cable terminal have 2 openings for stock wiring and another wire?

 

Set of Clear corners.SOLD!

Set of Sylvania Silverstars. I used them for about 3 months until I decided I would order the R-34 one pieces. I think I paid like $35.00 for these. Asking $15.00.


Suspension/wheels:

20" Axis Millano +'s 4 wheels mounted with 75% left on tires. I have 3 extra tires, 2 are perfect about ~50% on them. One has a little inner wall wear ~30% on it, as well 2 spare wheels that have been sand blasted, perfect for spares, could be refinished to new. There is some slight curb rash on the wheels, and light clear coat peel, but unless your looking for it, you will not see it. There is also a little of the Nitto ST555 scraped off the wall, from where it was lowered, it just BARELY scraped the side wall, and would scrape off the lettering. MSRP on the 4 wheels alone is $3600.00. Set of Nitto ST555's 245/60ZR20's about $800.00. So $4400.00. Then 2 spare wheels ~ $150.00 each. Tires ~ $200.00 for the 3. So ~$4900.00 worth of products. Not including shipping, we would have to work something out, for everything total of 6 wheels, and 7 tires, asking $1300.00.

 

The top pictures is the original center caps with the Axis logo, but the lower is custom made center caps, that I made, however I still have the original ones, and the buyer can have these if they'd like to sand down and put their own logo on. I liked the custom look. I even have the Nissan burgers in the same redish color, somewhere I will throw in if I can find them.

 

2 front struts - KYB AGX ~ 8,000 on them. MSRP - $350.00 for the front two. Asking $150.00. SOLD!

4 Eibach Pro Springs ~ 6,000 on them. MSRP - $300.00. Asking $200.00. - SOLD!

 

Set of Gorilla Locks I believe they are 12x1.25, comes with 2 locks and 12 extra lugs. You see 15 extra pictured, and 3 keys, but 2 or 3 of the lug might want to be replaced by the others. And one of the keys is cut down because it cracked, as far as I remember it was usable, or you may want to trash it. Your call. Also included are 4 brand new valve stems. MSRP - For 20 lugs, 1 key $60.00. Asking $35.00 for entire package.


Set of 12x1.5 lugs, they came off a 350z. They use the inner key, like a hex key. Asking $20.00.


Performance:

Injen Cold Air Intake. MSRP - $370.00. Asking $125.00. SOLD!

 

Also have a Stillen Air Filter - I believe it goes to the Stillen Ram Air Intake, however I purchased it from someone, and wasn't aware that I was getting the large mouth, and not the small mouth opening. Asking $15.00.

 

More pictures of the terminals, I took one out JUUUUUUST for you, Mr. Law Man. Haha. Here ya go.




They have 2 fronts, and a top. Then the one on the left tightens it down to the battery post.

 

Interior pieces:

Have a couple odd and end pieces, a couple cup holders, center dash bezels, pockets for under the CD player, a pocket with a door for under the CD player

Hazard Light - $5.00.


Ash tray - Pops into the fold down piece, not entire unit, just the removable ash tray. All you smokers know you always need another one. $5.00.

Vent thing for the dash, I believe it is the drivers side. $5.00.


Switch covers for the passanger and one rear door. $6.00.


Clock - It would probably be good if you gave it a good cleaning and buffing, but I have no idea, it looks like it was out in a junk yard. Free, you pay shipping


Interior door handles - $20.00.

 

Pocket with fold down front - $12.00.


Another pocket with fold down front - Whoever buys this one or the open pocket first gets the brackets if they want them. $12.00.


Open pocket - Read above about brackets... $12.00. SOLD!


Center of dash - with hazard, clock and rear defrost - Doesn't have the cross members in, but will before being shipped. $30.00.

 

Duke, what is the guage wire can the terminal fronts fit?

 

Black cupholder - no clips. Perfect for someone who has the clips but as nasty cup holder. $15.00.


Brown cup holder - has 2 of the 3 clips, would be held in place fine. $15.00.


More I.C.E.

Mobile Spec 1 Farad Capacitor - Brand New - MSRP - $110.00. Asking $70.00.

 

The Law, check on those pictures I posted for you a few minutes ago, I just updated that post with a new picture.

 

This is a 10.4 inch monitor that was fabricated to be mounted in a 2002 Volkswagen Passat. You can either use it in... well a Passat, or take it out and use it as a raw screen and fabricate it to what your wanting. I had planned on putting it into the Maxima, taking out the Microvision and putting it in, in place of my hazards, clock and rear defrost and molding it in. It has two inputs, and a remote with the eye to be mounted wherever you want. As well, it has the housing still just been modified to fit the Passat, so if you'd like to break it apart and get back to the housing, that is also an opinion. MSRP - ~$600.00. Asking - $200.00.




Keep checking back, as I will post more products as I come across them. But this should be the majority of it. If you want to give me an offer, feel free, don't say something that will give me a heart attach or your joking. But be serious. Thanks!

 

Need prices. If they are not up tomorrow, I throw the lockdown.

 

I am going to get them up. I had to take a break from all the parts collecting, picture taking, uploading, and inserting to watch my Duke Blue Devils in the second half, I missed the first half completely because I was doing this. But they will be up tonight Mr. Phen-Phen, mister moderator, sir.

 

You have a ton of stuff to sell. Just make sure you get the prices up for what you've posted soon.

 

Prices are up, as of late last night. They are included with the information and pictures, just not in the original thread.

 

How much of the matting do you have left? I see the role but how much is there? How much shipped to Jacksonville, FL. 32246?

 

I want to say appx. 40 sq. ft.

 

If no one makes any offers, I am going to be putting most of everything on E-bay Monday sometime. Shot me a PM, e-mail me, IM me, or post here and throw an offer out there. Just be serious, and don't play games.

 

what year maxima is the center dash stuff taken out of? i need some parts for my wood trim that are fading in color due to the sun.