This is my 96 turbo altima running 12.72 @ 107 mph, 1.8 60ft on 14psi of boost.
http://videos.streetfire.net/video/T...MPH_176354.htm

 

who care nice times, more pic's and info about the car would be nice

 

Sorry,

Its a 96 Altima with a fully built KA24DET ...



I will post more info later on.

 

Wow what a quick Altima. Nice work.

 

That seems like a really low trap for a 12.7et.

 

I was kinda surprised my self , I dont if its all the weight reducton I have done or what. The car weighs 2820lb with me in it and I weigh 260lb. I will post the time slip tomorrow.

 

I was wondering the same....wasn't there another turbo Altima owner (Brian or something?) that ran a built KA24DE on 10lbs w/a 12.7 @110? Of course different driver, car, turbo, track,etc....

Nice job...

 

Nice car!! And Nice ET. Your Trap may be a little low depending on what elevation/atmospheric conditions were present at the time of your runs.

Definate sleeper!!

 

<~EX U13KA-T .... nice #s wish I still had mines... nice manifold !! you from NY ?

 

Brian is a member of altimas.net and yes he ran 12.73 @110 on 15 psi. I live in Jersey.

 

Sweet time I love the front end that car has. Thanks for not PMing me like you said you would when you went to the track, jerk

 

Sorry man totally forgot, I was not even planning on going to the track that day. I'll let you know next time I go if that makes you feel better.lol

 

That's a quick Altima! I don't get why the trap speed is so low though.

 

Damn thats a second faster than me and 2 mph slower trap lol. Nice run. What turbo are you running?

 

Very nice! What kind of engines do these cars have stock and what car does the KA come out of?

 

KA-T FTW!

 

+1???

 

KA was used in the Altima, as well as the 240sx

 

hmm, i didnt kno that... i need to check the alti forum, i might wanna project one out, so is that turbo setup can basically be used in the 240sx???.......... do a lot of ppl do like the VQ30 swap??? im really gonna look into one for a project

 

FWD and Rwd KA24DE's have the same exhaust manifold but the orientation of the turbo is always different, the manifold that I have have was custom made for my car .. I only know of one guy that have tried the VQ swap on Altima, I dont even know if he ever finished it. It would be nice though, putting a VQ in an Altima which is slightly lighter than a Maxima.

 

Nice run but your AFR oscillates a lot at high RPM and goes pretty lean in certain spots.

 

Former Alty.net / Goku I was around with Cthunder/BlackHornet/Peterson was still on board

 

Haha gee thanks.

 

Yes it does... i wonder what he used to tune it?

 

I'm running a Jwt ECU with the 96lb program I'm using an SAFCII to tune it .

 

with the factory motors doing 12's boosted, im pretty sure that there's a lot of low 14's alti all motor, thats impressive, i never would have thought

 

At least one member went 14.6 all motor AND on stock 9.2 compression and wasn't gutted...
Same one went 13.9 w/a 10.5 compression and junk cams....

 

Nice vid

 

Very nice ET. What kind of power is the car putting down (any dynojet graphs to post)?

 

I have not dynoed it yet, with that trap speed I'm guessing about 300ish hp.

 

whats the fastest na maxima

 

What turbo are you running? Nice manifold btw

 

I'm running a Turbonetics T76 BB with an A/R 58 exhaust housing..

 

Very impressive. I love the 1st gen Altima's. I did not think there were that many boosted. PROPS!!!!

 

Dude, whats up with your tune?

What kind of EMS are you using, what fuel pump, and size injectors? Aren't you concerned about the wacky afr... probably why you trapped so low ?

 

I'm running the JWT 96lb program, I think problem with AFR's was with the SAFC because the tune was not too good on it there was too much fuel taken off around the 5000-5800rpm range thats why it would go lean every time the engine would go through that range than it would get rich around 6k-redline . Now I have tuned it a little better and I also switch to a blow through maf setup which should help with the richness in between gears .

 

I'm running msd 96lb injectors with a Walbro in tank and an Aeromotive A1000 external.

 

man you gonna make me go get another 95 altima lol i was gonna boost the KA until i ran up on my 5.5 gen. i might get another one since they run cheap. good ****

 

Got 3 more passes in today @ Island dragway here in NJ, this track sucks but it was the only close to me that was doing test and tune..

1st pass= 11.9 @ 115 Mph 1.9 60ft
2nd pass= 12.4@ 110 Mph 1.9 60ft
3rd pass= 11.82 114 Mph 1.8 60ft

The cars was spinning tires 1st -2nd gear and bogging 3rd gear on all 3 passes and for some dumb reason I was letting off before the trap, must of been because I was too excited.. Slips and vids will be up soon..

 

holy ****, that car is fast

nice