Hey Everyone,
We've worked together with a manufacturing plant to create a CustomMaxima Catback Exhaust System for the 4th Gen Max. We have based the design off the Greddy Evolution 2 system for the 5th gen. Our goal is to offer the Maxima community a similar system as the Greddy EVO2 kit at a more affordable price by selling it direct. We designed a similar system for the 5th gen, and the kit has become quite popular and has receive a lot of positive feedback. You can view it here...
http://forums.maxima.org/group-deals...9-shipped.html



Most 1995-1996 models need to buy an extra sensor pipe (center pipe). Some 97-99 might need the pipe as well. The best way to find out is to look under your Max to make sure you have it or not.


To order the center pipe, it is an additional $50.


We've got the price down to only $159.99.
$159.99 - Catback System
$209.99 - Catback System + Center Pipe


Shipping...

$100.00 48 state domestic shipping
$160.00 to Canada

• All hardware, gaskets, bolts, and hangers are included.
• Mandrel Bent and Full Stainless Steel
• Produces a Deep Smooth Tone

Below are some pictures...



How To Order...

We accept Visa, Mastercard, American Express, and Discover

Online -
Go to our website, http://www.custommaxima.com/product/...m/Default.aspx and add the Product to your cart that you want. If you experience any problems with the shopping cart, call us at 772-285-5872 to place the order manually.

Phone Orders -
Give us a call at 772-285-5872. We're open all day Monday-Friday to take your orders over the phone!

Paypal -
Give us a call or E-mail us for your total price including shipping. All Paypal payments must be sent to: xportmodz2@Yahoo.com


If you have any questions, Call me direct at 772-285-5872 or email me Direct at XportModz@yahoo.com.






Center Pipe
Exhaust System

 

is it possible to get the setup without the muffler cheaper?

 

Sorry, we only sell the system complete.

 

Also...These ship same/next day.

 

Any sound clips of this exhaust on a 95 maxima? Thanks

 

This is on a 5h Gen, http://www.youtube.com/watch?v=tXH2mW0s0sk.

The quality is not very good on the recording and apparently the mic did not pick up as much of the deep bass that the kit gives off. A couple members are going to send in some sound clips.

EVERY customer so far has been extremely satisfied with this kit.

 

Does this kit have to use the resonator? Or does it come with an extra pipe? And is it ture Stainless steel? or polished alum?

 

The whole system is stainless steel. All the piping that is in the image is what is included.

 

Looks nice, It seems like it has the ability to add a silencer? or no?

 

Yes, the silencer is included as an option to use.

 

awesome how much shipped too 01850?

and is there a way you can get a better audio clip for us?

 

Thank you, sounded ok but do wish it was a bit better.
For $159 I may be very curious in picking one up and trying it out.
I'll try and decide quick and PM you or follow the instructions in your initial post

 

The price is $259.99 shipped w/o the center pipe, and $309.99 shipped with the center pipe. We have some members that are going to send us some better sound clips. Call me direct at 772-285-5872 to place the order.

 

Only $159.99??????

$100 ship? =/

 

We sell them for $259.99 shipped OTD. They were posted on the site for 159.99 + 100 shipping. The shipping probably doesn't fully cost $100.00. It was just the way they posted the $259.99 shipped price. If we put shipping at $50 the price would increase to 199.99, so bottom line....The kit is $259.99 however you look at it.

 

Here is our new sound clip. It is the same system,b ut for the 5th gen...

http://www.deftflux.net/mp3/custommaxima_exhaust.mp3

 

Wish I had the money right now.

 

Is the sound clip with or without the silencer?

Are there any power gains? I assume there will be some, I just haven't seen anyone say anything about power gains from this catback.

 

what is the diameter of the piping? 2.5" or 3.0"?

 

2.5".

The sound clip is without the silencer.

 

is it possible to get it with a less ricey looking muffler? why to all of the exhaust kits ive seen so far all have fart cans on them?? fart cans belong on hondas just my $.02

 

Will the intermediate pipe bolt up to a stock muffler and cat?

 

X2
Also would like to know

 

hmmm, I'm not too sure. I know it will bolt straight to the cat, but it might require some modifications to have it fit to the stock muffler.

 

^^Anyone done this out there? This is the deciding factor for me. I'd buy the kit and sell the muffler, or just keep it in the garage. My wifey can't be riding with that bling in the back!

 

+1 I am ready to buy now. I need a cat-back kit, if I can get it without the ricy looking muffler I'll take one. What are the options?

 

This is the only muffler that we have for this system on 4th gens right now, but at this price, you could always buy a muffler that you like and swap them out. You can then sell the muffler that comes with it on eBay or something.

 

I think if you could verify that it fits with other mufflers, like the stocker, or stillen axlebacks, you might sell a few more...I'm interested, but not interested in modifying anything.