Hi, org. I have been down for 8 months without my car and I just have found me a job and I have some cash to spill, untill I decide what to do after my valvebody rebuild. I have questions as of where and what size of the bolts go back on to the valvebody I just working on it and I want to know what screws go where on the valvebody. Thanks.

 

I am looking at the FSM but it does not clear stat what screws are the abcd and what size any HELP!!

 

http://www.vqpower.com/v2/articles.php?article_id=60

read that idk if that helps at all

 

AT-218 and AT-219 label all of the valve body bolts, and clearly indicates which bolts are which by length. Is that not what you need?

 

Thanks for the replies guys, I am looking at the vqpower and FSM links. I am wondering If there's any bolts that go directly thru the lower VB when the oil strainers with the 12 bolts that are out.

 

I have the FSM print out of the valve body and I have all of the screws laid out in order and size. I have a problem here the printout says that I should have 11 but I have 16 of the D's and 3 of the b's when I have 1 Iam not missing any of the screws here. I want someone to actually give me a real pics of the bolts size and how I should have and where they go. I have doughts about the print out having some real and acurate info. Thanks.