I powder coat alot of calipers. These are some Altima SER calipers that I recently powder coated with a base of red powder, applied the mylar decals, and then applied a clear topcoat to protect the decals/calipers. I am still working on the hardware....powder coating it all satin black with a bare metal clear coat for the ultimate protection from brake fluid etc. I am about to do another set in a deep switch back blue. Lmk what you guys think.

What they looked like when i got them:


What they look like now:


In this pic it shows how the decal looks like it is raised rather than just flat by applying an additional coat of clear powder

 

Nice job!

 

Thanks ranmas.

 

I'm always impressed by your work and attention to detail.

 

Thank you sir!

 

You're right. In this pic, it totally looks 3-dimensional. Nice job.

 

Thanks

 

i want those now. Great job

 

Lol, they come with matching 350Z rear calipers, so you'll have to also upgrade to 2006-2008 350Z rear rotors and remove or trim the dust shield. Thanks for the feedback

 

I shouldn t look at these ! Real nice job there 4DRZ

 

Yeah..everyone should look at them. lol Thank you for the compliment.

 

No problem my friend .

 

Hey 4DZC , with some 06 350Z rears , would some 300ZX TT s would be a good choice !

Does someone needs 300zx s Master Cylinder & Brake Booster on a 05-06 Altima ! Thanx have a nice one .

 

30mm Z32's and the 2006+ 350Z calipers are a good combination. You do not need to use the master cylinder from the 300ZX to use the Z32 calipers.

 

Thanx for the comeback , wanted to be shure .

 

Got some pics of 300Z s on hand 4DZC !

 

Sure....

Finished and ready to ship!
Media blasted and Satin Clear powder coat applied for protection. Member opted for the black out option on the caliper pistons on both the Z32 as well as the 350Z rears. I think I am really liking the natural finish look.






350Z rears:




Full set: Difference in color is the fact only a clear was used, and the front calipers are aluminum, rears are iron. If a colored powder was used, there would be no difference in color shades....

 

Thanx for the pics 4DZC , appreciated .

 

PM d you ther 4DZC .

 

Original & Refinished:
Black Chrome with all blacked out hardware, machine looking front caliper face, and a thick clear coat applied over base color and decal.

 

Any advice of where I can find all SE-R Calipers?
And how much do you charge to powder coat them like that, white with maybe red or black letters

 

You can search around different forums, and or places like ebay. I have about 3 sets of the fronts but no rears. The rears are the same as any 3rd gen Altima or 7th gen Maxima. You could also use rears from the 350Z, but you would also need the rear rotors from the 350Z/G35.

 

Awesome job on those.. and what do you charge to powered coat calipers?

 

Depends on what yor looking for...fronts, rears, both front and rear...am I rebuilding them and putting them together or are you able to reassemble? I can tailor fit to anyone's needs. PM me what your looking for.

 

Great work on those SE-R calipers. Great info on here as well. Definitely be PM you about a brake setup.