Hi can someone give me the Diagram for a 2014 Maxima SV 3.5? I have a check engine for Cyl # 3. I think it's on the back wall. I googled and could not find out. Thanks.

 

Odd numbers in the front ( by radiator), even numbers under the plenum

start w #1 at passenger, then #3, then 5….

 

Are you sure about that?

In previous generation Maximas, 1 was always at the firewall, and 2 is at the radiator....

https://www.my4dsc.com/vq35de-cylind...inder-numbers/

 

I saw that prev Gen firing order. I was not sure it was the same for the 2014 3.5 Maxima? I have never not been able to find the firing order for such a popular car before?

What I need is to know is each of the 6 cly's numbers and position as the motor sits in the car.

I saw this post also that said 1995 - 1999

Goes as follows:

1 3 5 [Driver Side]

2 4 6

[Front]

 

https://www.my4dsc.com/vq35de-cylind...inder-numbers/

Here you go!

 

The same link that I provided. Nicely done. LOL

 

I'd bet money that the cylinder designation is the same across all Maximas, regardless of year or generation.

 

Well it just goes to show we both know where to look. LOL

 

Page EM-129 of the Factory Service Manual for the 2014 model year, in the link provided shows the cylinder firing order. The FSM is listed under Nissan Info.

 

What link provided? Where? I must be missing something?

 

The link in my first post, or the link in the Wizard's first post. https://www.my4dsc.com/vq35de-cylind...inder-numbers/

 

Thank you all. I see the pull down for the service man at top now. When I scroll through the 100 plus pages I still did not see the cly order. EM-129 showed the attached screen shot below.

So is this the correct firing order for the 2009 - 2014 Maxima?

Goes as follows:

1 3 5 [Driver Side]

2 4 6

[Front]

 

That page is from the 2010 model year service manual. Bring up the 2014 model year service manual which is your model year.

 

Ok thank you so much. I feel like a dummy, I thought for sure I clicked 2014 but guess not. Thanks to all. I'm going to post it if anyone else googles for ease. Again....Thanks!