OUT--> GC Coilovers, IN--> Sprint Springs...Satisfaction--> 100%...
OUT--> GC Coilovers, IN--> Sprint Springs...Satisfaction--> 100%...
Well, after only two weeks with the Ground Control Coilovers, I switched them out for Sprint Springs today, and I can honestly say that I'm 100% satisfied with the Sprints, and I'm much happier now than I was with the Coilovers.
You may remember me posting a thread a while back about the noise and horrible ride I was having with my GCs, but that's not the whole reason I decided to get rid of them. First of all, the noise went away. I also really got used to the ride...and realized that for the drop I had, I had to suffer the harsh ride.
I thought hard about it and decided that I really didn't need the adjustability. Another factor was that the GCs were almost $200 more than the Sprints, and I could use that money elsewhere.
Anyways, I love the Sprint/AGX Setup. The AGXs are currently on 2/4, and the ride is perfect. It absorbs bumps pretty well, but you can feel them. I also have no noise at all. I'm 100% satisfied.
So, if anyone is looking for GC Coilovers, check the FS Forum.
Later,
-Nick
You may remember me posting a thread a while back about the noise and horrible ride I was having with my GCs, but that's not the whole reason I decided to get rid of them. First of all, the noise went away. I also really got used to the ride...and realized that for the drop I had, I had to suffer the harsh ride.
I thought hard about it and decided that I really didn't need the adjustability. Another factor was that the GCs were almost $200 more than the Sprints, and I could use that money elsewhere.
Anyways, I love the Sprint/AGX Setup. The AGXs are currently on 2/4, and the ride is perfect. It absorbs bumps pretty well, but you can feel them. I also have no noise at all. I'm 100% satisfied.
So, if anyone is looking for GC Coilovers, check the FS Forum.
Later,
-Nick
yea
i'm really giving credit to Sprint Springs.... "190hpKilla"s car rides very nicely, with AGXs and Sprints
drop is also sweet... looks too low for clearence sometimes, but when you come up close, there is plenty of room
i'm really giving credit to Sprint Springs.... "190hpKilla"s car rides very nicely, with AGXs and Sprints
drop is also sweet... looks too low for clearence sometimes, but when you come up close, there is plenty of room
Gettin my springs
I'm pumped you guys are saying such good things about the Sprints - I just ordered mine up on Friday so they should be here this week. Too bad they're going to have to wait to go on until I get the rest of the money to get the KYB AGXs.
Nick 97 - When you say you have them set to 2/4, is that front/back settings?
How many of you guys have the camber kit or bought all the other hardware for your suspension that has been discussed on this board?
Peace
Nick 97 - When you say you have them set to 2/4, is that front/back settings?
How many of you guys have the camber kit or bought all the other hardware for your suspension that has been discussed on this board?
Peace
I didn't need camber bolts w/ my sprints. I have the bolts sitting next to my computer. I cut a coil out of the rear springs to make the car even. I like the look of the car better like this.
Install
So really how hard is the install do to by yourself..I dont think I would be able to do it..I have a floor jack, jack stands and I could rent a spring compressor..>Did you change anything when you were in there ?? Did you use the AGX bearings or did you use the existing bearings ??
Nick maybe if you live In NJ you could help me out with my Eibach/AGX install in the beginning of May..I can come to your house and chill...I really need an experinaced hand and you sound like you know what your doing since you did it twice already...
Email me Jeepman17@aol.com
-Matt in Northern NJ
Nick maybe if you live In NJ you could help me out with my Eibach/AGX install in the beginning of May..I can come to your house and chill...I really need an experinaced hand and you sound like you know what your doing since you did it twice already...
Email me Jeepman17@aol.com
-Matt in Northern NJ
Originally posted by Supa Lao
I didn't need camber bolts w/ my sprints. I have the bolts sitting next to my computer. I cut a coil out of the rear springs to make the car even. I like the look of the car better like this.
I didn't need camber bolts w/ my sprints. I have the bolts sitting next to my computer. I cut a coil out of the rear springs to make the car even. I like the look of the car better like this.
Re: Gettin my springs
Originally posted by dtholmanmax
Nick 97 - When you say you have them set to 2/4, is that front/back settings?
How many of you guys have the camber kit or bought all the other hardware for your suspension that has been discussed on this board?
Nick 97 - When you say you have them set to 2/4, is that front/back settings?
How many of you guys have the camber kit or bought all the other hardware for your suspension that has been discussed on this board?
I don't have any camber bolts or kit, but I didn't get an alignment done yet either. I'll probably get that done this weekend. We'll see what happens.
-Nick
Re: Install
Originally posted by matty
So really how hard is the install do to by yourself..I dont think I would be able to do it..I have a floor jack, jack stands and I could rent a spring compressor..>Did you change anything when you were in there ?? Did you use the AGX bearings or did you use the existing bearings ??
Nick maybe if you live In NJ you could help me out with my Eibach/AGX install in the beginning of May..I can come to your house and chill...I really need an experinaced hand and you sound like you know what your doing since you did it twice already...
Email me Jeepman17@aol.com
-Matt in Northern NJ
So really how hard is the install do to by yourself..I dont think I would be able to do it..I have a floor jack, jack stands and I could rent a spring compressor..>Did you change anything when you were in there ?? Did you use the AGX bearings or did you use the existing bearings ??
Nick maybe if you live In NJ you could help me out with my Eibach/AGX install in the beginning of May..I can come to your house and chill...I really need an experinaced hand and you sound like you know what your doing since you did it twice already...
Email me Jeepman17@aol.com
-Matt in Northern NJ
I'm in NJ, and maybe I could help you out. I'm usually pretty busy with work and stuff, but we'll see what happens. I gotta see if my neighbor will let me use his shop again.
Later,
-Nick
Originally posted by Nick97SE
The only negative is the back sits so high, but I kinda like it that way I guess. Anyways, I'll be posting pics as soon as we get some nice weather so I can wash my car.
Later,
-Nick
The only negative is the back sits so high, but I kinda like it that way I guess. Anyways, I'll be posting pics as soon as we get some nice weather so I can wash my car.
Later,
-Nick
Originally posted by cooley
i just put my sprints in and the rear still has big gap..did you cut the coil from the top of spring or the bottom?
i just put my sprints in and the rear still has big gap..did you cut the coil from the top of spring or the bottom?
PICS!!!! Clean your car Nick i wanna see how good it looks, i have only seen one other 97+SE with sprints and stock rims and it was low as hell(he had a front lip too)Were gonna have to meet up in May when i get home, my damn agx/sprint combo is collecting dust in my garage
Thread
Thread Starter
Forum
Replies
Last Post
CAN-Toronto FS: Basement cleaning
knight_yyz
5th Generation Classifieds (2000-2003)
12
Nov 1, 2015 01:34 PM
JakeOfAllTrades
7th Generation Maxima (2009-2015)
1
Sep 30, 2015 03:16 PM
Andy29
5th Generation Maxima (2000-2003)
8
Sep 29, 2015 05:32 AM




