Maxima Forums

Maxima Forums (https://maxima.org/forums/)
-   Supercharged/Turbocharged (https://maxima.org/forums/supercharged-turbocharged-38/)
-   -   Squeeling at startup with loss of power steering? (https://maxima.org/forums/supercharged-turbocharged/340204-squeeling-startup-loss-power-steering.html)

Mymax97 02-01-2006 11:29 AM

Squeeling at startup with loss of power steering?
 
Hey guys,
My maxima has a supercharger and when i start it sometimes it will squeel for awhile and i will loose my power steering for say 30secs. Does this have anything to do with the belt on the supercharger and should i have it replaced? Flame on if needed.

slimer 02-01-2006 11:49 AM

You may need to tighten it. Last winter, mine squealed like that. Jack the car up and see of you can twist it more than 180 degrees on the segement that is next to the oil pan. If so, tighten it up.

Mymax97 02-01-2006 12:00 PM


Originally Posted by slimer
You may need to tighten it. Last winter, mine squealed like that. Jack the car up and see of you can twist it more than 180 degrees on the segement that is next to the oil pan. If so, tighten it up.

What IT am i looking to twist the belt?

slimer 02-01-2006 02:34 PM


Originally Posted by Mymax97
What IT am i looking to twist the belt?

Twist the belt. See if it goes past, whoops, 90 degrees.

Do you know how to tighten the belt? Which kit do you have? V1 or V2

Mymax97 02-01-2006 02:38 PM

V1 kit and nope i dont know how to tighten the belt.

Chunger 02-02-2006 12:17 PM

Power Steering belt is separate from the main (SC) belt... it's at the back by the firewall... get a manual.

choray911 02-11-2006 06:55 PM

You have air in the Power Steering lines. Jack the front of the car up, remove the PS fluid resivor lid and top off. Turn the wheel lock to lock very slowly 10 or so times with the moror off. Then crank it up and repeat with the motor running. That should take care of it.
Choray

Mymax97 02-11-2006 09:59 PM

ok ill try that this week

Nealoc187 02-12-2006 10:15 AM

Power steering belt is too loose. Tighten the PS belt up. Has nothing to do with the SC belt. Could be the pump too I suppose but the belt is the usual suspect.

MaximaEvolution 02-14-2006 06:26 AM

you probably just need to replace your belts... i know my belts are goin and they squeal a little, and until they grab my rpm's are low, like 1000rpm at cold start.


All times are GMT -7. The time now is 04:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands