Bronze/polished lip Volk TE-37/LE-37's, 5x114.3, 18x8.5"
 

I was holding on to these for the last couple of years but I'm over modding my car, so they're up for sale. They are genuine Rays Engineering/Volk wheels - they have "Rays/Forged/Made in Japan" cast on the back side, and they're very light (17.6 lbs each on my home scale). They are the "Limited Edition" TE-37's, or LE-37's. They were used by a local Evo racer, so they saw a lot of track duty, and the stickers peeled off from the heat. I got an extra set of blue stickers with them, so those are brand new, you can decide if you want to put them on or not. Also, no center caps. :(

Offset: 30mm - I'm not 100% sure since it's not on the wheel, and the Rays stickers on the inside of the wheel with the size/offset lost their lettering over time. I measured the backspacing (152mm is the closest I could get) and did the math from there, it comes out to 32mm, but I think 30mm is the most common size for these.

And the bad news is... one wheel has a small (maybe 1" long) hairline crack on the backside. I got a quote from a local shop to fix it for $150, and I can do that if the buyer is interested, but I thought it might be better to get that done locally so you can have it warrantied in case there is a problem. Also, if you don't like the color, I can have them powdercoated any color you want locally as well for an extra $250.

Check out the pics, I have closeups of each individual wheel face. There are no curb marks, just a couple of small scuffs from tire mounting/dismounting. I have several pictures of the crack, the backside of the wheel, and other angles of the wheel.

Pics: http://www.rafalr.com/forsale/maxima/volks/

Asking $1200 plus shipping (should be less than $100 to ship, they're pretty light) as they sit. If you want the crack fixed, add $150. I think that's pretty reasonable, I checked around and used prices for these wheels are in the 1600-1800 range, some are over 2 grand with tires, but I'm open to serious offers close to my asking price.

http://www.rafalr.com/forsale/maxima/volks/1-image1.jpg

TE37's are fully powdercoated, TE37's with polished lip = LE37

LE37T's in gold finish & 18x8.5 came in +22 +30. Yours is likely the later.

Nobody interested? I thought I would at least get some people's attention with these...

i'm guessing w/ teh stance movement, you're going to have a slightly harder time selling these on top of lack of money. GLWS though man. great seller! free bump

Back up for labor day weekend!

if you were closer id def grab these

Why do people always say this? I already said I'm willing to ship, and it's not like this is a 100 dollar set of wheels where shipping would double the price.

.

Friday bump.

only if funds were there. :(

Up again!

Still trying to sell these.