Rims on their 7th Gen Max MEGA Thread!
10-09-2014 | 04:52 PM
#2883
Senior Member
Joined: Jul 2011
Posts: 369
From: Delaware
10-11-2014 | 06:59 PM
#2884
Newbie - Just Registered
Joined: Oct 2014
Posts: 10
Hi all new member here thinking about getting some sothis sc5 20×8.5 +20 ive seen a post on this forum with someone selling wheels with this offset and width my question is am I gunna need to run alot of camber to make it work and also has anyone heard of sothis wheels kinda makes me nervous that I cant find anything about them on the web
10-11-2014 | 07:27 PM
#2885
Newbie - Just Registered
Joined: Oct 2014
Posts: 10
http:// https://maxima.org/forums/7t...le-wheels.html
These are the wheels that are the same size as the ones I want but I cant tell, it doesnt look like to much camber to me
These are the wheels that are the same size as the ones I want but I cant tell, it doesnt look like to much camber to me
Last edited by bsand7682; 10-11-2014 at 07:34 PM. Reason: re enter the link
10-12-2014 | 03:32 PM
#2886
Supporting Maxima.org Member
Joined: Nov 2000
Posts: 2,909
From: Reno, NV
Hi all new member here thinking about getting some sothis sc5 20×8.5 +20 ive seen a post on this forum with someone selling wheels with this offset and width my question is am I gunna need to run alot of camber to make it work and also has anyone heard of sothis wheels kinda makes me nervous that I cant find anything about them on the web
Having gone 9 with a 35mm, I would not hesitate to do a 10 with a 40mm if I did it again. The Maxima has big hips and a narrow wheel will look off.
10-13-2014 | 01:28 PM
#2890
Supporting Maxima.org Member
Joined: Nov 2000
Posts: 2,909
From: Reno, NV
10-14-2014 | 10:28 AM
#2896
Newbie - Just Registered
Joined: Oct 2014
Posts: 1
wheels
There is a member here that has a tread on these wheels. Put this in the search box and it will come up "TSW Nurburgring's installed-Pics".
As far as lowering, I really don't see the big deal imo due to the fact it is only an inch /inch and a half and with the size wheel you want and the offset you should not have any issues with alignment or rubbing. I'm sure others will chime in but I guess I was just lucky not to have any issues at all. Sometimes looking through treads can be a little discouraging but not everyone has issues with this car. I'm staggered 20x9/20x10 on eibachs with no rubbing or alignment issues!
Good luck!
As far as lowering, I really don't see the big deal imo due to the fact it is only an inch /inch and a half and with the size wheel you want and the offset you should not have any issues with alignment or rubbing. I'm sure others will chime in but I guess I was just lucky not to have any issues at all. Sometimes looking through treads can be a little discouraging but not everyone has issues with this car. I'm staggered 20x9/20x10 on eibachs with no rubbing or alignment issues!
Good luck!
10-15-2014 | 05:13 AM
#2897
Newbie - Just Registered
Joined: Oct 2014
Posts: 11
From: Dover, DE
I just got my Max a couple weeks ago and I have to say I'm truly inspired by u guys to put money into her 
I love all your Max's, great job. So am I understanding this correctly, I can do 20x10 all around with a 40 or 45 offset? I'll end up doing lowering springs as well if possible ^.^
I love all your Max's, great job. So am I understanding this correctly, I can do 20x10 all around with a 40 or 45 offset? I'll end up doing lowering springs as well if possible ^.^
10-24-2014 | 09:37 AM
#2898
Newbie - Just Registered
Joined: Oct 2014
Posts: 1
Staggered or not??
Hi, I'm a Maxima Newbie and was wondering if I could get some opinions on
is staggering the wheels on these cars is a good idea. I'm going with TSW nurbs, but can't decide between the 20X8.5 all around or 20X10 on the rears. I don't think the wheel has much or any concave to give it a different appearance. It will also have The Eibach prokit put on at the same time. Any thoughts or insights would be helpfull, Thanks
is staggering the wheels on these cars is a good idea. I'm going with TSW nurbs, but can't decide between the 20X8.5 all around or 20X10 on the rears. I don't think the wheel has much or any concave to give it a different appearance. It will also have The Eibach prokit put on at the same time. Any thoughts or insights would be helpfull, Thanks
10-26-2014 | 12:22 AM
#2899
Newbie - Just Registered
Joined: Oct 2014
Posts: 8
From: At the beach... in southwesternish IL
I have the pearl white... I was thinking of getting black chrome wheels but my wife, dad, and mom all said I should get straight chrome because of all the chrome accents already on the car. SO, my issue comes in the fact that I like the look of black chrome SO I might buy that stuff that turns chrome to black chrome (Forgot the name right now) and do that to all the chromed surfaces. But NOW I was looking at all the wheel's posted up here and I'm torn! I have plenty of time for this... but like to think about it plenty in advance.
10-28-2014 | 11:43 PM
#2901
Newbie - Just Registered
Joined: Oct 2014
Posts: 8
From: At the beach... in southwesternish IL
No, I mean chome LOOK ... Yeah, I've handled OLD Chrome wheels from helping a friend and his dad when I was a kid... I'm really leaning towards black and blacking out all my chrome accents.
12-28-2014 | 04:12 PM
#2906
Newbie - Just Registered
Joined: Dec 2014
Posts: 1
Hey guys...I'm new to the forum but have visited the site a lot in the past year for ideas. I have a set of Lexani CVX-55 20x9 40mm offset on 245/35/20 Triangle UHP TR968 tires. I'm happy with the setup but still debating on whether the Eibach springs are needed.
12-30-2014 | 06:43 PM
#2907
Supporting Maxima.org Member
Joined: Nov 2000
Posts: 2,909
From: Reno, NV
01-18-2015 | 11:06 AM
#2912
Junior Member
Joined: Dec 2014
Posts: 66
From: Chicago, IL
MaximaDrvr... thanks for the info. I had to go back a few pages to catch a pic of ur Max, it looks good and im a big 5 spoke fan so im torn between wheels like yours and like Maximam's wheels.
As far as concavity, how would u have gotten ur current wheels to b more concave? More or less offset? Wheel width?
As far as concavity, how would u have gotten ur current wheels to b more concave? More or less offset? Wheel width?
01-18-2015 | 11:50 AM
#2913
MaximaDrvr... thanks for the info. I had to go back a few pages to catch a pic of ur Max, it looks good and im a big 5 spoke fan so im torn between wheels like yours and like Maximam's wheels.
As far as concavity, how would u have gotten ur current wheels to b more concave? More or less offset? Wheel width?
As far as concavity, how would u have gotten ur current wheels to b more concave? More or less offset? Wheel width?
These are the other wheels I run. 18x9.5 et38. 275/40/18
01-20-2015 | 03:28 AM
#2914
Junior Member
Joined: Dec 2014
Posts: 66
From: Chicago, IL
01-24-2015 | 11:35 PM
#2915
Newbie - Just Registered
Joined: Jan 2015
Posts: 1
22' rims
Need some help...looking at some 22x8.5 with 255/30/22 tires...what offset will they need to be to sit flush with the fenders?....will they rub?....or should I look for some 245/30/22 tires?....thanx for the help!!!!:
02-11-2015 | 07:54 PM
#2919
Newbie - Just Registered
Joined: Feb 2014
Posts: 8
From: Northern California
