Polished Valve Cover Treatment
#1
Polished Valve Cover Treatment
If you have polished aluminum valve covers and you would like to protect the finish without using a clear coat that may yellow or crack over time, I found an unlikely product that will keep the polished aluminum finish from tarnishing.
I started using this product about 4 years ago on my polished Q45 plenum. I tried various clear engine/header finishes without success. The clears would either yellow or start to crack over time. About the same time I was having problems using a clear on the valve covers and the plenum, Armor All introduced the Wheel Protectant product.
If you think about wheels getting heated up from brake friction, then being exposed to road grime, salt, and brake dust, a valve cover has an easy life in comparison.
So I gave it a try. It works!
Basically after polishing an aluminum valve cover, I spray on one coat of AA Wheel Protectant and let it dry at room temp for an hour.
Next I apply a second coat and bake it at 175 degrees for 45 minutes to cure.
After I remove the cured VC from the oven, I rub it with a microfiber cloth to shiny luster.
The product seems to soak into the metal pores and provides protection for years. If you need to reapply it some time later, you can respray it in place without getting into all the hassles of paint.
Here's a picture of my 99 Maxima valve cover coming out of the oven after the 2nd treatment before the final microfiber shine up.
[/URL]
The product.
I started using this product about 4 years ago on my polished Q45 plenum. I tried various clear engine/header finishes without success. The clears would either yellow or start to crack over time. About the same time I was having problems using a clear on the valve covers and the plenum, Armor All introduced the Wheel Protectant product.
If you think about wheels getting heated up from brake friction, then being exposed to road grime, salt, and brake dust, a valve cover has an easy life in comparison.
So I gave it a try. It works!
Basically after polishing an aluminum valve cover, I spray on one coat of AA Wheel Protectant and let it dry at room temp for an hour.
Next I apply a second coat and bake it at 175 degrees for 45 minutes to cure.
After I remove the cured VC from the oven, I rub it with a microfiber cloth to shiny luster.
The product seems to soak into the metal pores and provides protection for years. If you need to reapply it some time later, you can respray it in place without getting into all the hassles of paint.
Here's a picture of my 99 Maxima valve cover coming out of the oven after the 2nd treatment before the final microfiber shine up.
[/URL]
The product.
#2
If you have polished aluminum valve covers and you would like to protect the finish without using a clear coat that may yellow or crack over time, I found an unlikely product that will keep the polished aluminum finish from tarnishing.
I started using this product about 4 years ago on my polished Q45 plenum. I tried various clear engine/header finishes without success. The clears would either yellow or start to crack over time. About the same time I was having problems using a clear on the valve covers and the plenum, Armor All introduced the Wheel Protectant product.
If you think about wheels getting heated up from brake friction, then being exposed to road grime, salt, and brake dust, a valve cover has an easy life in comparison.
So I gave it a try. It works!
Basically after polishing an aluminum valve cover, I spray on one coat of AA Wheel Protectant and let it dry at room temp for an hour.
Next I apply a second coat and bake it at 175 degrees for 45 minutes to cure.
After I remove the cured VC from the oven, I rub it with a microfiber cloth to shiny luster.
The product seems to soak into the metal pores and provides protection for years. If you need to reapply it some time later, you can respray it in place without getting into all the hassles of paint.
Here's a picture of my 99 Maxima valve cover coming out of the oven after the 2nd treatment before the final microfiber shine up.
[/URL]
The product.
I started using this product about 4 years ago on my polished Q45 plenum. I tried various clear engine/header finishes without success. The clears would either yellow or start to crack over time. About the same time I was having problems using a clear on the valve covers and the plenum, Armor All introduced the Wheel Protectant product.
If you think about wheels getting heated up from brake friction, then being exposed to road grime, salt, and brake dust, a valve cover has an easy life in comparison.
So I gave it a try. It works!
Basically after polishing an aluminum valve cover, I spray on one coat of AA Wheel Protectant and let it dry at room temp for an hour.
Next I apply a second coat and bake it at 175 degrees for 45 minutes to cure.
After I remove the cured VC from the oven, I rub it with a microfiber cloth to shiny luster.
The product seems to soak into the metal pores and provides protection for years. If you need to reapply it some time later, you can respray it in place without getting into all the hassles of paint.
Here's a picture of my 99 Maxima valve cover coming out of the oven after the 2nd treatment before the final microfiber shine up.
[/URL]
The product.
-Andy
Thread
Thread Starter
Forum
Replies
Last Post
TKHanson
5th Generation Maxima (2000-2003)
6
11-24-2018 01:39 AM
tseng1023
5th Generation Classifieds (2000-2003)
3
10-15-2015 08:30 AM
hayne
6th Generation Maxima (2004-2008)
2
10-05-2015 11:53 AM