So whats everyone think I ran. V1 Blower 3.125 pulley y-pipe cattman 2.5 catback 18in muranos 235 40 nexen n3000 street tires Cobra rotors no weight reduction full leather interior 3 jl 10s in the trunk. I think thats all that really matters.

Remember first time at track ever but wasnt a completely bad run beter then 15s. 2.7 60ft all the hit im giving but dont look too much into it.

Closest to my time or trap speed ill paypal $3 to if you get it exact $5. Ill come on tomorrow night or as soon as someone gets it to say the answer.

R/T: .583
60': 2.708
330: 6.710
1/8: 9.809
MPH: 80.20
1000: 12.404
1/4: 14.597
MPH: 103.08

Temp F 59
Relative Humidity 66
Absolute Baro 17.82

 

14.36 or 14.58

 

whats your trap guess?

 

5spd or Auto? 14.48

 

60ft. -> 2.2x
ET -> 14.2xx

 

14.62 @ 98mph

 

14.32 @ 102

 

You must have had some mad spinning to run a 2.7 60'. I would say you pulled off a 14.70 @ 97mph.

 

14.51@104..........

 

thread is

 

+1 Just post the times.

 

He was almost dead on you win.

R/T: .583
60': 2.708
330: 6.710
1/8: 9.809
MPH: 80.20
1000: 12.404
1/4: 14.597
MPH: 103.08

Temp F 59
Relative Humidity 66
Absolute Baro 17.82

 

i think my 14.58 was dead on

 

ooo **** didnt even see that. ok u get the time he gets the trap

 

i would have guessed around 14.9 to 14.7, a 2.7 60 foot will put a hurting on you. good run though, you have some power to make a 3rd and 4th quarter comeback and put up 103 mph. nice work

 

Thanks Ceasar. I just cant wait to run again in a month, this was just a base run to see what i do before the 00vi, 555cc injectors, z32 mafs, 2.87 pulley, and the EU.

 

If you can get the car to hook and do a good 60', with those mods you are going to be turning a great ET and mph.

 

yea hopefully i can it would be so nice to get into the 12s probally gona need some slicks but all i want to do is be faster then my bosses $100k sports car. XLR-V i think they run like 12.5s. So if i come near him i just want to laugh at him.

 

thats got to be a mistake on the baro pressure, no way it was that low in PA.

 

the track was in MD. cecil county. Its about 70 miles south of SW philly.

 

its just a mistake in the print outs, baro pressures never drop below 29 for that area.

 

oo i dono thats just what the slip said so thats what i put.

 

I would work on some better times with this setup rather than getting a whole lot more parts to just put up another ridiculous time.

 

well i was already planning on getting the parts. That was just a base time i guess. Ill work with the new setup. Basically i needed a new belt because it was slipping so then i was like well might as well get a smaller pulley, and then i was like hmm well if i get a smaller pulley i need to get something to tune with, and then i was like well ill prob need new injectors, was gona stay USIM but then 00iv injectors are top feed just like the vq35 so if i want to swap i can just reuse the injectors. So thats how all the parts came into it. Plus the car just doesnt pull like it used to because im used to it i think so its like a new feeling for me.