my first track day =( vol. disappointed
edit!! VIDEO FINALLY!! DONT MIND MY EXCESSIVE BURNOUT LOL ITS MY FIRST TIME
http://www.youtube.com/watch?v=tcomIsXKUnk as many of you may know, im chasing the legendary kevin007s (R.I.P.) time at the track. 12.8 was the time i was trying to beat. Statistically, i should have beat these times with no problem . Kevin's Dyno was 270hp/284 tq on a dynojet. I did over 300 hp/tq on a mustang dyno which reads lowers. if you just base it off that without kevins driving skill, i should be in the low to mid 12s? Tires used were 18x8.5 rays track wheels wrapped in mickey thompson street radials 245 40 18 rear: 18x8 rays track wheels wrapped in dunlop direzza star specs same size. that being said, my 60 ft times were pretty crappy. Kevin did have nitto 555r DRAG radials. maybe it was a combination of that +driver skill. Keep in mind this was my first time at the track. http://i37.tinypic.com/1239jc9.jpg comments welcome!! kevin your a beast. i dont know how you did what you did!!! |
for the first time at the track, i'd say thats not bad at all.. you can only get better.. just keep practicing
what are your mods? |
+1 on mod list. Your times can only improve once you get your 60' down.
|
Practice practice, all you need is seat time.
|
With the same 60's as Kevin you would be in the 12's. Good job for your first time out.
|
Wow. Nice job. Any video?
|
if i knew how to convert mts files from my camcorder to computer then yes i would. u know how?
|
you'd definitely be in the 12s, but not low 12s with those trap speeds. keep working at it or get some slicks.
|
Originally Posted by Look-at-my-MAX
(Post 7238863)
if i knew how to convert mts files from my camcorder to computer then yes i would. u know how?
http://www.mtsconverter.com/mts-to-mpeg-converter.html i think you should be able to dl the program that lets you on there.. if that doesn't work, i would try looking on google for a step by step on how to convert it.. thats what i did.. or maybe youtube might have it too? in for the video :) |
youtubing it right now thanks chief.
|
Mickey Thompson tires are wayyyyyyy better than nittos.
Also, your tire is a drag radial :laugh: I think you just have to mess with the tire pressure to get them to hook. |
niceeee times!!
in for the mod list too!!!! |
Nice times. Not bad for the first time out.
|
Sick burnout man!!
|
what mod u have??
|
what? kevin did go 270 hp /284 tq on dyno w/ NOS? and u go over 300 hp / 300 tq on HR NA? its impossible! what do u have a mod on ur car? HR Stuff by 350Z? or ECU by Technosquare or Injen Intake or Exhaut cut out?
Originally Posted by Look-at-my-MAX
(Post 7236409)
edit!! VIDEO FINALLY!! DONT MIND MY EXCESSIVE BURNOUT LOL ITS MY FIRST TIME
http://www.youtube.com/watch?v=tcomIsXKUnk as many of you may know, im chasing the legendary kevin007s (R.I.P.) time at the track. 12.8 was the time i was trying to beat. Statistically, i should have beat these times with no problem . Kevin's Dyno was 270hp/284 tq on a dynojet. I did over 300 hp/tq on a mustang dyno which reads lowers. if you just base it off that without kevins driving skill, i should be in the low to mid 12s? Tires used were 18x8.5 rays track wheels wrapped in mickey thompson street radials 245 40 18 rear: 18x8 rays track wheels wrapped in dunlop direzza star specs same size. that being said, my 60 ft times were pretty crappy. Kevin did have nitto 555r DRAG radials. maybe it was a combination of that +driver skill. Keep in mind this was my first time at the track. http://i37.tinypic.com/1239jc9.jpg comments welcome!! kevin your a beast. i dont know how you did what you did!!! |
Originally Posted by Look-at-my-MAX
I did over 300 hp/tq on a mustang dyno which reads lowers.
108 trap looks like high 12's even with a decent 60'. Nice run. Sounds cool. |
Originally Posted by MIKERNM1990
(Post 7644316)
what? kevin did go 270 hp /284 tq on dyno w/ NOS? and u go over 300 hp / 300 tq on HR NA? its impossible! what do u have a mod on ur car? HR Stuff by 350Z? or ECU by Technosquare or Injen Intake or Exhaut cut out?
:spit:lol. Good job man. Nice times. |
Originally Posted by Rhyno02
(Post 7644581)
:spit:lol.
Good job man. Nice times. |
Originally Posted by NmexMAX
(Post 7644594)
It's actually a very good design for the 6th gen.
:eek: Really? Hm. Dammit. My bad. |
Originally Posted by MIKERNM1990
(Post 7644316)
what? kevin did go 270 hp /284 tq on dyno w/ NOS? and u go over 300 hp / 300 tq on HR NA? its impossible! what do u have a mod on ur car? HR Stuff by 350Z? or ECU by Technosquare or Injen Intake or Exhaut cut out?
Do some research and see for yourself. :laugh: |
Not for torque though :nono: 300 torque w/o N2O...
either way, it's a good time and it be nice to see a mod list and perhaps, a dynojet dyno. |
HR's fail at torque.
|
i remember he have a mod by maxima.org:
Technosquare ECU but i not know about L or F- Spec Injen Intake VQ35HR built heads, (cams, valve springs, shims, retainers) also my bro have maxima 5 spd auto and i told him, he saw a maxima vq35hr go 13.1 by youtube and my bro decide he plan to put alot of mod on his car (soon) but he told me that his car is 265 hp and 255 torque and one thing of mod make a 340 hp and 310 tq @ flywheel WITHOUT A N20!!!!!! i cant tell u a secret mod i hope he will kill a maxima NA VQ35HR PERIOD! lol
Originally Posted by krazy6
(Post 7645088)
300whp is not that hard with a bolt on VQ35HR. I believe his claim with no doubts. People underestimate the potential of the VQ for all motor power.
Do some research and see for yourself. :laugh: |
get lightweight 16inch wheels in front, MT drag tires and get thinner wheels/tires in the back with 40psi in them, strap the front shocks down with ratchet straps to reduce front shocks motion while shifting and launching...
still place for improvement in the small details...but most important is the 60foot and launch. Looks good for a first time man, get those times down. |
Originally Posted by MIKERNM1990
(Post 7645683)
i remember he have a mod by maxima.org:
Technosquare ECU but i not know about L or F- Spec Injen Intake VQ35HR built heads, (cams, valve springs, shims, retainers) also my bro have maxima 5 spd auto and i told him, he saw a maxima vq35hr go 13.1 by youtube and my bro decide he plan to put alot of mod on his car (soon) but he told me that his car is 265 hp and 255 torque and one thing of mod make a 340 hp and 310 tq @ flywheel WITHOUT A N20!!!!!! i cant tell u a secret mod i hope he will kill a maxima NA VQ35HR PERIOD! lol |
Originally Posted by krazy6
(Post 7646818)
God daaaaamzzzzz, u suck at teh engrish. :laugh:
|
Originally Posted by ajcool2
(Post 7646915)
Made my head hurt trying to read it
|
clearly ... :hide:
|
ok guy, what is fastest stock for 6th gen maxima for 4at, 5at and 6spd manual on timeslip?? i want to know who low 13s to 14s and over 100 mph for quarter mile?
|
on depend some who have use vq35hr (cams, valve springs, shims, retainers) swap put on maxima from 07-08 350z hr
Originally Posted by ajcool2
(Post 7646915)
Made my head hurt trying to read it and the last time I checked maximas dont have vq35hr's.
|
why u use a red with bold for injen intake??:confused:
Originally Posted by Rhyno02
(Post 7644581)
:spit:lol.
Good job man. Nice times. |
kevin go 12.8 sec
max vq35hr black go 13.1 sec who go 12.4 @ 119 mph? from black 04 maxima w/ NX bottle and, u not believe me or BS about that then click website on below http://www.cardomain.com/ride/714637 |
the thing that im most jealous with is your trap speed... trapping 106mph OMMFG!!! id be jumping all over the place if i trapped 103 lmao!!! congrats bro man... i cant wait for my time to jump into the low 13's N/A
|
All times are GMT -7. The time now is 06:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands