1/4 and 1/8 Mile Racing Talk about track times, launch techniques, strategies, etc. Check out the "Timeslips" subforum for posted times.No discussion of street racing will be tolerated.

My 03 4AT 1/8 mile

Thread Tools
 
Search this Thread
 
Old 08-09-2013, 07:26 AM
  #1  
Senior Member
Thread Starter
 
Rcrootbeer's Avatar
 
Join Date: Jun 2012
Location: Dallas, TX
Posts: 499
So last night was the Discount Tire employee race day at Northstar Drag Strip which is a local 1/8 mile and my friend invited me to go, and all of his coworkers hate me now because I destroyed their buddies built civic... But anyways

It was between 92-96 degrees and fairly humid when we started racing around 8:30. The Infinity Club was there which was pretty cool and all the G coupes were running 9.8-10.0's so I guessed I would be a little slower than that.

My mods are a custom 3" catback no resonator, an SRI, 350z 18's, and lowered on Megan springs so nothing to crazy. First time I get up there against a newer stage 1 GTI and run a 9.9 and won on a bad launch. As the night slowly progressed I worked my times down beating a modded s2k 6Mt with a 9.7.

Finally, the last race of the night I got lined up with a heavily modified early 70's Camaro z28 that I watched burn out right infront of me and was pissed because I wanted to just race someone that wouldn't blow me out of the water. We lined up, my reaction time was a .16 and I ran a 9.52 beating him and the ignorant announcer said "Oh my God! The Altima won!"

So moral of the story... Is a 9.5 good?

Last edited by Rcrootbeer; 08-09-2013 at 07:37 AM.
Rcrootbeer is offline  
Old 08-09-2013, 11:14 AM
  #2  
Senior Member
iTrader: (46)
 
schmellyfart's Avatar
 
Join Date: Jan 2009
Location: AZ
Posts: 3,827
Do you have the timeslips?
schmellyfart is offline  
Old 08-09-2013, 01:13 PM
  #3  
Senior Member
Thread Starter
 
Rcrootbeer's Avatar
 
Join Date: Jun 2012
Location: Dallas, TX
Posts: 499
I have the 9.7 where I beat s2k but my friend threw the 9.5 on the ground....
Rcrootbeer is offline  
Old 08-09-2013, 03:59 PM
  #4  
Supporting Maxima.org Member
iTrader: (5)
 
nishfish871's Avatar
 
Join Date: Nov 2005
Location: Fort Worth, TX
Posts: 1,081
Originally Posted by Rcrootbeer
I have the 9.7 where I beat s2k but my friend threw the 9.5 on the ground....
What track did you go to and on what day? Next time you go, let the DFW guys know! I am sure we can get a bunch of people to go.
nishfish871 is offline  
Old 08-09-2013, 09:30 PM
  #5  
Senior Member
Thread Starter
 
Rcrootbeer's Avatar
 
Join Date: Jun 2012
Location: Dallas, TX
Posts: 499
Read the first post it'll answer all of your questions, and it was kinda spur of the moment thing. It would be so cool to have a bunch of Maximas and the infinity club there
Rcrootbeer is offline  
Old 08-14-2013, 12:52 PM
  #6  
^ Jeff™
iTrader: (11)
 
MrEous's Avatar
 
Join Date: Sep 2002
Location: Garland (DFW), TX
Posts: 3,775
Gut your precats if you can't afford headers...should be consistent 9.3 just by doing that.
9.5 is pretty good though for the heat/humidity, what was your trap speed?

Nish - He went to the Denton 1/8th mile track
MrEous is offline  
Old 08-23-2013, 06:44 PM
  #7  
Senior Member
Thread Starter
 
Rcrootbeer's Avatar
 
Join Date: Jun 2012
Location: Dallas, TX
Posts: 499
Alright bump it up. I'm at the track at this very moment and this is what I just ran: Name:  2013-08-23203942_zps65896001.jpg
Views: 80
Size:  99.4 KB
Rcrootbeer is offline  
Old 08-23-2013, 08:35 PM
  #8  
Supporting Maxima.org Member
iTrader: (5)
 
nishfish871's Avatar
 
Join Date: Nov 2005
Location: Fort Worth, TX
Posts: 1,081
Originally Posted by Rcrootbeer
Alright bump it up. I'm at the track at this very moment and this is what I just ran:
Again with the invites !! Join the group below and keep us informed.

https://www.facebook.com/groups/70139905184/
nishfish871 is offline  
Old 11-13-2013, 10:05 AM
  #9  
Senior Member
Thread Starter
 
Rcrootbeer's Avatar
 
Join Date: Jun 2012
Location: Dallas, TX
Posts: 499
Going to Northstar in Denton again on Friday! Lets get a few maximas there!
Rcrootbeer is offline  
Old 11-16-2013, 11:48 AM
  #10  
Senior Member
Thread Starter
 
Rcrootbeer's Avatar
 
Join Date: Jun 2012
Location: Dallas, TX
Posts: 499
Well. The timeslip printer was broken so all you have is my word.

Same mods as before. Passenger seat, rear seats, trunk all removed. Rear tires at max PSI(50) and fronts deflated to 32 PSI. 65 degrees outside, hardly humid at all. Best run of the night was a 9.34 spinning halfway through first so I know I could have done better.

Im very happy with that considering my mods are minimal.

Last edited by Rcrootbeer; 11-16-2013 at 12:00 PM.
Rcrootbeer is offline  
Old 12-21-2013, 11:34 AM
  #11  
Member
iTrader: (1)
 
FlawleZ's Avatar
 
Join Date: Jun 2008
Location: San Antonio
Posts: 280
9.3 is good for just intake and exhaust. You should grab the spacers, NWP block off plate and 2* timing advance.

I had all of the above but stock exhaust and best I ran was a 14.4@98 and 9.3@77 in the 1/8.
FlawleZ is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turbonut
5th Generation Maxima (2000-2003)
46
10-21-2015 08:28 PM
JoshG
4th Generation Maxima (1995-1999)
51
09-21-2015 10:41 PM
zzznightmarezz
Maximas for Sale / Wanted
0
09-21-2015 06:32 PM
Socalstillen
4th Generation Maxima (1995-1999)
9
09-20-2015 11:46 PM
hntwhttail
4th Generation Maxima (1995-1999)
0
09-12-2015 03:43 PM



Quick Reply: My 03 4AT 1/8 mile



All times are GMT -7. The time now is 12:08 AM.