well today i got in my car and i noticed the clutch was 1/2 way down, and i started the motor and pressed the clutch and it will not go in any gear, the clutch fluid is ok,

ive been driving around with the speedo cable not scrwed in so transimissin fluid has been comming out, but i took the cable out agian and the lvl seems to be ok,

idont know where to screw fell but i wonder if it fen fell in the hole that the speedo goes in.



i really need help guys, this is my only car and i cant get anywhere

 

Check your master and slave clutch cylinders. Have someone pump the clutch while you look at the clutch fork. Best is either bad hydraulics, or a bad pressure plate.

S