Head gasket blew. Lots of good and newer parts. Tan with brown leather seats. All the bells and whistles/sunroof/etc. Tell me what you need. Also new in box KONI shocks, front and rear, never installed, $100. Email me at jsbsssjs@aol.com. Going to get towed for salvage soon- tired of grief from my wife over it sitting here.

 

I'm sorry about your car and what occurred to it, I'd be upset and disappointed too. I don't understand what happened though, I thought the only event that would occur on our cars and if it did, was the timing belt snapping and destroying the engine. If this is something I can check and replace myself, please let me know. I suppose the gasket cracked and coolant leaked into the cylinders? Is that it? With the head gasket blowing, did it ruin any parts? I'm sorry about the common sense questions, I'm still an intermediate regarding our cars. Any tips on preventing something like this from happening to my car?

On a positive note, we both have the same Maxima's or rather had.....

How much for the stock rims and tires? Also, if you had a Cold Air Intake setup, how much for that?

- Best Regards,
- David Steele
- Take Care

 

Unless the head gasket let fluid into a cylinder and you bent something you should be able to just replace the head gasket and keep a good car.

 

maybe hes just sick of working on a car that always needs something else fixed...and the car might not be worth as much as the repairs

 

I may be interested in the heater fan but that depends on if I find out if its just a fuse or something.

 

DIBS ON KONIS, hey they will work on myne right???? koni is better that kyb right?????


where did you get them??

 

i want the seats if u can send me a pic. i also need armrest and glove box. send me some pics or a message if possible.

 

Koni's are the best struts you can get for out cars. I talked to him about them several times but could never convince myself to buy them since I already had aftermarket struts. They cost some where around 400-500 new if you can even get them any more. Its a great deal in other words.

 

I think what caused this was having a mechanic replace the timing belt when i had him install a water pump and not knowing how to do it correctly. I think he screwed up the piston to intake valve position. The car ran on a little on the hot side from the bad piston to valve timing. Over time (several years) the gasket gave out. So... when you replace the timing belt follow Nissan's instructions carefully to make sure the belt is properly placed. The pressure of the exhaust gas blew the radiator.

 

yea i talked to him to but something about buying shocks/struts that have been sitting for about 15 years bugged me

 

I doubt you'd be willing to pull the tranny out?

 

I want the entire car shipped to me. That'll put you at ease.

By the way, how much for the muffler?

- Best Regards,
- David Steele
- Take Care

 

Not worth the effort to remove it... not in great shape.

 

Right. Weather's getting too cold to be crawling around on the ground.

 

Koni' are spoken for. Accepting 2nd dibs in case buyer doesn't follow through.
Glove box and center console spoken for.

Engine parts anyone? Newly replaced injectors, stock air intake, speaking lady box, relays, COMPUTER DISPLAY of mpg, etc.(Sits at bottom of center dash console). MAF, other parts you may need down the road???? Sunroof glass, HOOD lifter pistons? The car will be gone in a week.

 

that's fine.

I am interested in the speaker box, as well as drivers side automatic seat belt motor & cable.

and perhaps center console if it's the same as an 88.

 

[QUOTE=shaughn]that's fine.

... drivers side automatic seat belt motor & cable.

I don't think the seatbelts on mine are motor-driven...
Send me an offer for the voice box to jsbsssjs@aol.com

Which center console? between seats or the center dash console?

 

pics please?

 

send me an email and i will get them to you. jsbsssjs@aol.com

 

UPDATE: I'll be pulling the parts you guys have requested this weekend . If you haven't yet committed to the parts you are looking for you need to let me know what you want to do. After this weekend the car sadly goes off to the graveyard. So if there are any other takers let me know ASAP. Let's keep those maxima's running and looking good!

 

do you have clear bumper lights?

 

No on the lights.

 

You got email.

 

Digital instrument cluster anyone...?

 

i live down under but i would be interested in the maf if you could send me a pic it might fit my vg20et as it is impossible to get one down here or i can pay 976$$$ from nissan but im just looking at putting a rb30e maf on it as alterntive i have to get a wiring diagram to see if all terminals feed the same sensor info pic would be good

 

jos, you have PM

 

RE: MAF inquiries. I will take pic tomorrow. It's probably the original. The butterfly has been cleaned a few times... Was working well when I took the car off the road.

 

What's the status of that picture? While you're at it, could you take a picture of the engine bay?

- Best Regards,
- David Steele
- Take Care

 

MAF pix: send me an email address. I can't post pix here.

 

Here's what's left:

MAF
Throttle control
AIV
digital instrument cluster
heater blower fan
throttle position sensor (AT)
Air Regulator
Sunroof glass
ECU (main computer)
Drive Computer (mpg, distance to empty, etc display)
Distributor
Ignition coil and diode

All working parts.

 

Do you have the passenger side headlight and sidemarker?

 

Yes. Email me at jsbsssjs@aol.com and I'll get you a pic or two.

 

How much for the drive computer shipped to 37830?

Also, would you happen to know if our cars are pre-wired for it if they didn't come with it?

 

hey i got the manual last week, thanks man....sorry i have been workin on the car and havent been able to post but i should get it back together tommorow...got a new waterpumt, thermostat and CHTS in there....my CHTS had ignited and partly blew the connector off of the sensor it self

edit:
you got a feed back.

 

Don't know if they are pre-wired. Asking $25 shipped.

 

hi, I am pretty sure I am going to need the AIV (Air injection valve) set up. Please let me know if you have it. Was your car having any cold starting problems at the time you took it off the road. Thanks. Please let me know. It would need to be shipped to VA, 22901.

 

Do you have the trim piece that goes around the steering wheel with all the switches?