92 SE parts available
07-09-2007, 07:56 PM
#1
92 SE parts available
I am junking my 92 SE because the alternator and water pump have died and the ABS pump is leaking.
It is beige with auto climate control,
Homelink visors (from a newer Maxima),
an Otto Racing tower brace.(reserved)
All switches.
3 front coils (sold)
Door lock trim (sold)
I need to leave it in rolling condition so that it can be towed away (July 26!)
Does anyone want anything that is easily removed?
******
UPDATE: car has gone to the farm to play with the other Maximas.
I just have a few things left:
Homelink visors (beige, illuminated mirrors on both, from a newer Maxima), http://i198.photobucket.com/albums/a...a/100_4216.jpg http://i198.photobucket.com/albums/a...a/100_4212.jpg
an Otto Racing tower brace.(SOLD)
A-pillar trim (sold)
Heated, electric mirrors (charcoal color, from my previous GXE not the SE - I am pretty sure they are different.) http://i198.photobucket.com/albums/a...a/100_4237.jpg
Some dash switches.
clock
Driver's side window switch panel http://i198.photobucket.com/albums/a...a/100_4312.jpg http://i198.photobucket.com/albums/a...a/100_4318.jpg
Auto climate control panel with plugs, inside and outside temp sensors and fan speed control amp (works but the display is possessed, it dims and returns to normal whenever it feels like it)
Auto climate control panel (this one also works properly but dims and returns to normal on it own) (SOLD)
fan speed control amp (SOLD)
injectors (and rails) http://i198.photobucket.com/albums/a...a/100_4232.jpg http://i198.photobucket.com/albums/a...a/100_4234.jpg (SOLD)
Cup holder compartment http://i198.photobucket.com/albums/a...a/100_4321.jpg http://i198.photobucket.com/albums/a...a/100_4322.jpg http://i198.photobucket.com/albums/a...a/100_4323.jpg
wheel center caps for both the SE and GXE (I still have the SE wheels but i suspect shipping price would be insane!)
Any takers?
It is beige with auto climate control,
Homelink visors (from a newer Maxima),
an Otto Racing tower brace.(reserved)
All switches.
3 front coils (sold)
Door lock trim (sold)
I need to leave it in rolling condition so that it can be towed away (July 26!)
Does anyone want anything that is easily removed?
******
UPDATE: car has gone to the farm to play with the other Maximas.
I just have a few things left:
Homelink visors (beige, illuminated mirrors on both, from a newer Maxima), http://i198.photobucket.com/albums/a...a/100_4216.jpg http://i198.photobucket.com/albums/a...a/100_4212.jpg
an Otto Racing tower brace.(SOLD)
A-pillar trim (sold)
Heated, electric mirrors (charcoal color, from my previous GXE not the SE - I am pretty sure they are different.) http://i198.photobucket.com/albums/a...a/100_4237.jpg
Some dash switches.
clock
Driver's side window switch panel http://i198.photobucket.com/albums/a...a/100_4312.jpg http://i198.photobucket.com/albums/a...a/100_4318.jpg
Auto climate control panel with plugs, inside and outside temp sensors and fan speed control amp (works but the display is possessed, it dims and returns to normal whenever it feels like it)
Auto climate control panel (this one also works properly but dims and returns to normal on it own) (SOLD)
fan speed control amp (SOLD)
injectors (and rails) http://i198.photobucket.com/albums/a...a/100_4232.jpg http://i198.photobucket.com/albums/a...a/100_4234.jpg (SOLD)
Cup holder compartment http://i198.photobucket.com/albums/a...a/100_4321.jpg http://i198.photobucket.com/albums/a...a/100_4322.jpg http://i198.photobucket.com/albums/a...a/100_4323.jpg
wheel center caps for both the SE and GXE (I still have the SE wheels but i suspect shipping price would be insane!)
Any takers?
Last edited by oldman; 10-22-2007 at 10:39 AM.
07-10-2007, 02:55 AM
#2
Perfect timing...I'm planning on doing an auto climate swap in a couple of weeks. There are a few parts i haven't been able to get:
1) In-Vehicle Sensor (with hose, harness, and aspirator)
2) Air Mix Door Motor (with harness)
3) L bracket on Max Cold Door Rod with plastic clip
4) L bracket for Temp Control Rod with plastic clip
5) Spring for Max Cold Door Rod bracket
Did your system work perfectly?
Is your Otto FSTB from a 5th gen...I might take that as well...
1) In-Vehicle Sensor (with hose, harness, and aspirator)
2) Air Mix Door Motor (with harness)
3) L bracket on Max Cold Door Rod with plastic clip
4) L bracket for Temp Control Rod with plastic clip
5) Spring for Max Cold Door Rod bracket
Did your system work perfectly?
Is your Otto FSTB from a 5th gen...I might take that as well...
07-10-2007, 07:23 AM
#3
How's the interior?
I need the trim piece around the lock on the driver's side. You have the dark brown right?
Don't suppose your mats are any good? I need the hooks that screw into the floor and hold the mats in place. I took mine out a long time ago and have lost them.
I need the trim piece around the lock on the driver's side. You have the dark brown right?
Don't suppose your mats are any good? I need the hooks that screw into the floor and hold the mats in place. I took mine out a long time ago and have lost them.
07-10-2007, 10:07 AM
#5
climate system
Hi maximal
Do you need just those parts? Or the control unit, motors, etc.
Yes it works perfectly.
I don't remember which gen the FSTB is from, I know it wasn't a 3rd gen because those don't fit over the DOHC motors.
Do you need just those parts? Or the control unit, motors, etc.
Yes it works perfectly.
I don't remember which gen the FSTB is from, I know it wasn't a 3rd gen because those don't fit over the DOHC motors.
Originally Posted by maximal
Perfect timing...I'm planning on doing an auto climate swap in a couple of weeks. There are a few parts i haven't been able to get:
1) In-Vehicle Sensor (with hose, harness, and aspirator)
2) Air Mix Door Motor (with harness)
3) L bracket on Max Cold Door Rod with plastic clip
4) L bracket for Temp Control Rod with plastic clip
5) Spring for Max Cold Door Rod bracket
Did your system work perfectly?
Is your Otto FSTB from a 5th gen...I might take that as well...
1) In-Vehicle Sensor (with hose, harness, and aspirator)
2) Air Mix Door Motor (with harness)
3) L bracket on Max Cold Door Rod with plastic clip
4) L bracket for Temp Control Rod with plastic clip
5) Spring for Max Cold Door Rod bracket
Did your system work perfectly?
Is your Otto FSTB from a 5th gen...I might take that as well...
07-10-2007, 10:09 AM
#6
Originally Posted by crabapple
How's the interior?
I need the trim piece around the lock on the driver's side. You have the dark brown right?
Don't suppose your mats are any good? I need the hooks that screw into the floor and hold the mats in place. I took mine out a long time ago and have lost them.
I need the trim piece around the lock on the driver's side. You have the dark brown right?
Don't suppose your mats are any good? I need the hooks that screw into the floor and hold the mats in place. I took mine out a long time ago and have lost them.
The trim piece is yours. I am sure its dark brown, I'll check when I get home.
Do you want the mats or just the hooks. The mats aren't that bad, just dirty. I think I have both hooks, I'll check.
07-10-2007, 11:30 AM
#8
Originally Posted by oldman
Hi maximal
Do you need just those parts? Or the control unit, motors, etc.
Yes it works perfectly.
I don't remember which gen the FSTB is from, I know it wasn't a 3rd gen because those don't fit over the DOHC motors.
Do you need just those parts? Or the control unit, motors, etc.
Yes it works perfectly.
I don't remember which gen the FSTB is from, I know it wasn't a 3rd gen because those don't fit over the DOHC motors.
The 4th gen fstb looked flat and thin. I think it had 4 smaller, round holes on each side of "Otto Racing." The 5th gen fstb looked a little more sturdy and had 3 large oval holes on each side of the logo.
07-10-2007, 03:35 PM
#9
Originally Posted by maximal
The 4th gen fstb looked flat and thin. I think it had 4 smaller, round holes on each side of "Otto Racing." The 5th gen fstb looked a little more sturdy and had 3 large oval holes on each side of the logo.
07-10-2007, 07:15 PM
#13
Originally Posted by maximal
Price on the Otto FSTB?
Price on the automatic climate control parts?
Price on the automatic climate control parts?
I would like to sell the complete climate control set of parts (controller, etc). Maybe $50 plus shipping?
07-10-2007, 08:10 PM
#14
To upload your pics, use imageshack.us or photobucket.com.
I'll take the Otto FSTB, but I want to see the pics (just to be sure).
I don't really need the entire system, but $50 and I get the entire system to swap, correct?
The lights all worked in the climate control, right? Nothing was burnt out? Could you post some pics of the controller? Can you describe if there are any scratches or anything?
I'll take the Otto FSTB, but I want to see the pics (just to be sure).
I don't really need the entire system, but $50 and I get the entire system to swap, correct?
The lights all worked in the climate control, right? Nothing was burnt out? Could you post some pics of the controller? Can you describe if there are any scratches or anything?
07-10-2007, 09:16 PM
#15
Originally Posted by maximal
To upload your pics, use imageshack.us or photobucket.com.
I'll take the Otto FSTB, but I want to see the pics (just to be sure).
I don't really need the entire system, but $50 and I get the entire system to swap, correct?
The lights all worked in the climate control, right? Nothing was burnt out? Could you post some pics of the controller? Can you describe if there are any scratches or anything?
I'll take the Otto FSTB, but I want to see the pics (just to be sure).
I don't really need the entire system, but $50 and I get the entire system to swap, correct?
The lights all worked in the climate control, right? Nothing was burnt out? Could you post some pics of the controller? Can you describe if there are any scratches or anything?
http://i198.photobucket.com/albums/a...a/100_4210.jpg
and here is the control unit:
http://i198.photobucket.com/albums/a...a/100_4217.jpg
The lights are all working BUT the display is dim. Hitting it usually brightens the display for a while.
Its ok at night but difficult to see during the day.$50 + shipping. I find shipping from Canada to the US seems to be expensive compared to what I usually pay for items I have bought via eBay, etc. You can to to canadapost.ca and get an idea. You need the weight and box dimensions (which I can only guess at until everything is out), my postal code is K2J 2R3.
I will start taking it apart tomorrow night. The control unit is easy but if I find it is too difficult to get all the wiring, motors, connections, etc, I'll let you know.
07-10-2007, 09:17 PM
#16
Originally Posted by maximal
To upload your pics, use imageshack.us or photobucket.com.
I'll take the Otto FSTB, but I want to see the pics (just to be sure).
I don't really need the entire system, but $50 and I get the entire system to swap, correct?
The lights all worked in the climate control, right? Nothing was burnt out? Could you post some pics of the controller? Can you describe if there are any scratches or anything?
I'll take the Otto FSTB, but I want to see the pics (just to be sure).
I don't really need the entire system, but $50 and I get the entire system to swap, correct?
The lights all worked in the climate control, right? Nothing was burnt out? Could you post some pics of the controller? Can you describe if there are any scratches or anything?
07-11-2007, 05:16 AM
#17
Originally Posted by oldman
Hi crabapple.
The trim piece is yours. I am sure its dark brown, I'll check when I get home.
Do you want the mats or just the hooks. The mats aren't that bad, just dirty. I think I have both hooks, I'll check.
The trim piece is yours. I am sure its dark brown, I'll check when I get home.
Do you want the mats or just the hooks. The mats aren't that bad, just dirty. I think I have both hooks, I'll check.
My door panels are black with a beige insert. The plastic around the lock is black.
I have both hooks.
07-12-2007, 06:10 AM
#22
Originally Posted by oldman
crabapple
My door panels are black with a beige insert. The plastic around the lock is black.
I have both hooks.
My door panels are black with a beige insert. The plastic around the lock is black.
I have both hooks.
07-12-2007, 08:45 AM
#24
Originally Posted by crabapple
Shoot. Oh well, my search continues. I'll take the hooks and mats though. Think you could snap a picture of the mats? I'd appreciate it. Also, let me know what you think is a fair price + shipping to 75229.
07-12-2007, 07:05 PM
#27
mats
Originally Posted by crabapple
Shoot. Oh well, my search continues. I'll take the hooks and mats though. Think you could snap a picture of the mats? I'd appreciate it. Also, let me know what you think is a fair price + shipping to 75229.
You can have them for the cost of shipping but I am sure it would be cheaper to buy new ones.
http://i198.photobucket.com/albums/a...a/100_4223.jpg
http://i198.photobucket.com/albums/a...a/100_4224.jpg
07-12-2007, 07:07 PM
#28
Originally Posted by maxima_man1992
You still got the gauges?
Yes, but they are Canadian which means the KMH are larger than the MPH.
http://i198.photobucket.com/albums/a...a/100_4218.jpg
07-12-2007, 08:42 PM
#29
Originally Posted by oldman
I am junking my 92 SE because the alternator and water pump have died and the ABS pump is leaking.
It is beige with auto climate control, Homelink visors (from a newer Maxima) and an Otto Racing tower brace.
Heated, electric mirrors. switches, headlights, taillights, gauges.
I need to leave it in rolling condition so that it can be towed away (soon!)
Does anyone want anything that is easily removed?
It is beige with auto climate control, Homelink visors (from a newer Maxima) and an Otto Racing tower brace.
Heated, electric mirrors. switches, headlights, taillights, gauges.
I need to leave it in rolling condition so that it can be towed away (soon!)
Does anyone want anything that is easily removed?
Hey, cant use the visors I asked about, but do you have the center caps for the STOCK SE rims??
07-16-2007, 07:52 AM
#37
Originally Posted by SurraTT
load valves are valves on the rear crossmember that sense a load in the trunk or back seat, thus applying more braking to rear. im finding out they are rare
I'll try looking for them.
07-16-2007, 08:05 AM
#39
Originally Posted by phat
hi,
I am looking for the transmission pan ship to 19090.
I have a 92 se auto so it should be the same as yours.
thanks
phat
I am looking for the transmission pan ship to 19090.
I have a 92 se auto so it should be the same as yours.
thanks
phat