11/25/07: Car is gone. I have 3 items left

Fidanza, ACT, 10K miles on the set. $350+shipping. Pic 1, Pic 2
PlaceRacing CAI, Silver with New K&N cleaning kit. $100 shipped Pic
BlehmCo Stage II LTB $135 Shipped, never installed but has some scratches.Pic


Old info below here.
__________________________________________________ __________

11/11/07: Updated info and parts PICS!

Here are the pics from the accident.
Edit: I've added pics of the interior to the Flickr link,
http://www.flickr.com/photos/8421431...7602565754100/

Engine from 92'SE, was an Auto, rebuilt VTCs, Ported upper and lower intake manifold 78K
This is a strong engine, it should go to an enthusiast. Intake removed for NissanWorks spacer kit removal, can reinstall. I also have the VE from the car I did the 5-speed swap from. I used the VTC's from it for rebuild cores. Both engines can go at once, I'm thinking in the $400+ range (for both, not each). The 5-speed upper intake manifold with VI is the one I ported.

Upgrade parts still available
JWT 5-speed ECU $350 shipped
Fidanza, ACT, 10K miles on the set. $350+shipping. Pic 1, Pic 2

PlaceRacing CAI, Silver with New K&N cleaning kit. $100 shipped Pic

BlehmCo Groundwire Kit $40 shipped


Koni Reds These have maybe 12K on them. How about $300 + shipping?

HUD from early 3rd gen $55 shipped Pic

Euro Grill. Its chipped as the pics show, but still very rare. $85 shipped
Stock grill without Nissan Hamburger, perfect shape $40 shipped

Custom Maxima 3 gauge pod. Some years ago someone put together a GD on these. It was molded from the stock A-piller trim. $25 shipped

Stock SE fog lights, no chips. Pic 1, Pic 2 PENDING

VE Auto starter. Been sitting since I did the swap, pulled at 68K. Pic

WSP Y-Pipe and cat back New info!
The cat-back is toast, but the y might be ok. I'll pull it sometime this week and get a pic.

Random interior shot



Parts that are sold/spoken for
VLSD 5-speed tranny, axles and hubs SOLD!
Nissanworks Spacer kit $100 SOLD!
Courtesy FSTB $40 shipped SOLD!
BlehmCo RSTB $75 shipped SOLD!
Eibach SOLD!
ASP UDP SOLD!
Katzkin two-tone leather interior SOLD!
Rear Bulb Housings SOLD!

Removed items:
ST sways, even the front is tweaked a bit. I don't think they are worth selling.
B&M 4th gen Short Throw knock off modded for 3rd gen. I modded this a bit more than I remembered and I don't have instructions for install. I'll just toss it.

Then of course, I have the rest of the normal car stuff. I will be moving the brakes to my 94 GXE but pretty much everything else is available.

 

Why o why did i click...

I'm broke..

 

dibs on that 3 gauge pod. Do you have gauges in it? I see you never installed it. I don't know about $25 though...what did they go for on the GD?

 

Pricing on fogs, relay, and switch.

 

PM me when you figure out what you want for the interior. It's kinda sick.

 

DIBS ON THE BULB HOUSING FROM THE TAILLIGHTS. I see that the lights are complete crap. are the housings good though? if so i can do with just one.

 

I want to say $40ish, maybe $45. Maybe I can get a pic later.

 

LOL, nice edit, I was gonna ask if you had seen the pics. I'll check on the housings tomorrow. The left side should be ok.

 

Fix your PM box dude.

 

Didn't know it was off. It's enabled now

 

Ill take the UDP and maybe the shifter.

Thanks,
Alex

 

I think I've responded to everyone's PMs. This has generated quite a bit of interest, more than I expected.

Also a little note about time frame. I am having a bit of trouble getting the car into the garage. My driveway has a bit of an incline to it, so car + wheel skates + incline is impossible for one person to do. Today I'll be calling some friends to give me a hand. Once its in the garage, I can tear it apart. Bottom line is that I should be able to start pulling parts during this week.

 

check your pm again

 

sup with the bulb housings?

 

BlehmCo Stage II LTB $135 Shipped, never installed but has some scratches.

Custom Maxima 3 gauge pod. Some years ago someone put together a GD on these. It was molded from the stock A-piller trim. $25 shipped

how bout these $150 shipped im in CT

 

ima dork and I didn't check on them.

 

sent you a couple of pm's about rear bearings and ypipe. you get them? Thanks

 

yes, I overlooked them somehow, replied.

 

That was a Gorgeous 3rd Gen. Shame..........

 

pm sent about the pillar. Let's get some pics and we can seal the deal. Thanks!

 

nice car but too bad that had to happen...still got the RSTB and shifter?

 

All PM's replied to

 

bulb housingS? COME ON MANG

 

Come on man, Chiro appointment was tonight. 2.5hour trip. I'll get the info, please be patient the earliest they would go out would be Friday.

 

are you out on the burbs? naperville perhaps?

 

Mundelein, are you in the area?

 

Sorry to hear about the accident
I'll offer $30 shipped for the stock cat (02346)

 

Oh man, I feel sorry for you. You just bought my jwt ecu and hardly even used it. Are you alright?

 

Nah, but I know chicago

 

I'll live. on 3rd week of Chiro appointments, hopefully not too much more. Last night visit wasn't too great though.

I sure did enjoy the ECU while I had it. That, the y-pipe and intake spacers were the best mods IMHO. I could spin the tires in first gear from a 20 mile an hour roll, on KDW Z-rated tires. It was excellent.

 

How hard is it to install the HUD?

 

Its a bit of work. You need to splice a half a dozen wires and cut a hole in the dash (with it out of the car). Then again, I could sell you the dash too...

Search for the CraigB writeup, its all you would need. I thought it was easy but time consuming.

 

Have any Maxima or Nissan Ornaments off your that you want to sell cheap?

 

I'm keeping the grill emblem and I don't think there is anything else. 3rd Gen's are pretty emblem free.

 

updates?

 

Yes, tomorrow and Saturday I'll be stripping the parts. Sunday I will be packaging things. I'll have pics for the few of those that are waiting for them and yes, exub, I'll check out the bulb holders.

 

Can i get pics of my UDP please?

Thanks,
Alex

 

yeah, I guess... Is there a problem? I don't have it off yet.

 

theres no problem, i just like pics... you dont have to if you dont want to.

 

I'm in Bartlett, whenever I go back home to see the parents. Always nice to see other 3rd gens owners in the area who like to take care of the car. I still have yet to see one with a stillen kit driving around though.... any pics of that gauge pillar? I have the cash to paypal you, just want to see what I'm workin with. Thanks again.