superwhite. front-end collision @ 35mph (pics here). I was originally going to fix it, but after i got a z31 i decided to take the maxima's engine and put it in the z. fenders, grille, hood, and headlights/corners are busted. front bumper survived intact. of course engine is gone but still have some maxima-specific accessories.

the car MUST be gone in a month so if you think you want something even if you don't have the money right now, speak up so i can pull the parts and put them in the shed before the car is gone.

so.. here's what you can get
intake manifold
exhaust manifolds
MAF
FULL 5spd swap setup incl. hardware and bolts and a still-good clutch and flywheel (local pickup only unless you really want to pay shipping)
window regulators (excl. RR but i might have a working RR one elsewhere)
in-dash electrical units (except for the cluster which is gone)
taillights
stock springs
front calipers
PS pump
ECU
wiper motor/arms/linkage
axles
other items just ask

 

How much for the master window/lock switch shipped to 72769?

 

is this the vg5 or ve5?

 

$20 shipped

vg5 tranny. my gxe has the VE5 tranny but you would need to take the hubs and brakes and axles all as one setup, cuz i had to redrill the hubs for the 5.5gen brakes to go on. also would need to fix the striking rod yoke to swap out the leaky oil seal.

 

$20 shipped


Sold - PM sent

 

- License plate lamp brackets. There are three total. Mine are rusted to hell and every time I hit a bump one of them falls out and dangles. I'll take the screws(4) that hold them too.


I'll see if there's anything else I would need to make it more worthwhile. What color is the interior?

 

blue. interior is in mediocre shape, tho some parts are still good. depends what you're after. i'll take a look at the lisence plate lamp thingies.

also would this be shipping to canada? i guess i can do that but i'm not sure how much that will cost..

 

wrong thread!

 

learn to read. The front end of the car is busted.

Have you had time to check the brackets capedcadaver?

 

I responded to the wrong thread! learn to mind your own!

 

do you have the black plastic underbody panels/splash shields?

 

i do have a pearlwhite VE-style grille on my GXE which i'm also parting. just haven't made a thread for it yet since i'm only gonna part 1 car at a time, but for a non-critical part like that i guess i can just pop it off. LMK if you want that style or if you only want the older 3-bar style.

can't remember on that car.. i have the ones on my aforementioned GXE, plus a few that are stashed in the backseat of my grandpa's old car. i'm sure i have at least 1 full set of 4. do you need all 4?

not yet... been rainy but should be clear tomorrow. car is not at my residence so i don't see the car everyday. but i'll check everything i had to check all at once tomorrow

 

Hey caped, are the taillights SE? What I'm looking for is the black strips that are above and below the center tail piece. The ones I have now keep flaking off paint. Not to mention, but 2 of the stubs where you screw the strip into the tail piece are broken, I had to do a super glue fix for that.

 

the center piece was spraypainted by a previous owner so it's not factory gloss-black but i will take a look and see if they still appear to be in OK shape, and take a few macro shots w/ my camera for you to decide.

 

there's a few chips in the paint but they are in decent shape and sit tight and flush against the panel, despite the 2 outer screw holes being gone on the upper piece. pics of the chips:

http://i38.tinypic.com/f3s6z6.jpg
http://i37.tinypic.com/2hcoux2.jpg
http://i38.tinypic.com/2rwwd2c.jpg

got a full set of 4 that i sprayed off w/ a garden hose today. pics:

http://i33.tinypic.com/bivt6p.jpg
http://i38.tinypic.com/f02bgh.jpg

will this work? i used an 8mm socket to remove all 4 of the hex-headed screws, coated the threads with multipurpose grease, and put them back in. at least that way they won't be seized in there next time you need to put new bulbs in.

http://i37.tinypic.com/68zwqs.jpg
http://i36.tinypic.com/291m6qh.jpg

this actually ended up being the switch off my GXE since the auto-down didn't work right on the 89's switch. but all the window functions work on this one. i could not test the powerlock feature, as my powerlocks don't work, but i have tested multiple switches with my car and no matter what the locks still do not work so it's not the switch's fault. my assumption is that the power lock switch still works though, since the up AND down feature of my locks stopped working at the same time, and the keypads on my doors don't unlock/lock the doors either, indicating something to do with the door lock timer or something like that.

 

So it was one bracket for both lights. Wow, Mine was rusted way more than I thought. I was sure there were three parts to it..
If i see this right, the bracket only has one screw in the middle to hold it in place?

How much do you want for the it?

 

how much is the black piece that goes in between the tail lights u posted pics of shipped to 29229

and these items, pm me w/price

spolier
air intake cone (only if its a 4 inch wide opening)
relay cover (the wide one with two rows not the skinny one)
inside fuse cover
cup holder (if u have it)
triangle top dash vents

 

beautiful... ill check later today when i get home on which ones i exactly need (probably take all 4)

 

it's 3 screws that hold it onto the bumper, i just didn't have the camera far enough away from it for you to see the outer 2 screws (i have short arms lol). $20 shipped for the assembly (everything in the pic, including the bulbs and lenses) ok? Or do you only want the metal bracket w/ screws and nothing else?

 

Does this one have a sunroof if so i'd like to try and get the sliding shade on it.

 

Brake booster shipped to 06105

 

i'm reasonably certain that the cover is AWOL.. i have ridden in that car a bunch of times and i never remember matt opening or closing it. I'll check it though.

$40

 

Sounds reasonable, if you can take it off the car and keep it for now that would be great. I need to add funds to my paypal, could take something like 8 days or more like it did last time..

I was gonna ask for for the splash guard for the passenger side front wheel but someone asked for it before I thought of it.
Also I know you said you werent gonna part the other car right now, but I would need the driver side side marker (light beside the headlight) I know it's not hard to take off if you don't mind, and depending on how much you would want for it.

 

that one MIGHT still be intact on the 89... i seem to recall one of them surviving. i'll take a look tomorrow. also i might have other splashguards elsewhere.. i know i had an extra bottom one (the one that the radiator drain hose pokes thru) but I dunno if i have any extra p-side ones (aside from what's on my GXE) i can sell parts off the GXE that are non-critical to its ability to be cranked up and driven around. Just not any engine/suspension/brake stuff right now, or anything that would cause it to get rained in (like window glass, etc)

also with paypal, you should be able to just send money directly and have it pull money as needed via a linked card/account. that's what i did just the other day to buy some poly mounts for my Civic

 

I'll try, But I don't know if it will work. Give me your paypal so I have it ready.

I'll wait to hear for the side marker and splash guard.

 

ok... also i just noticed you're in canada so the shipping might end up being a little higher since it's international. but if i have the other items and can send it all together that will help with shipping costs.

 

i did find another passenger side splash guard (lemme double-check its fitment tomorrow. it was in my GXE's trunk) and the corner lamp on the SE has a slight crack but the one on my GXE is in better shape.. lemme measure the splash guard to see if i can fit it in a flat-rate box or not, then i'll get back to you on pricing.

 

Alright. It's the splash guard behind the wheel right? sorry just making sure, don't want to end up with the wrong one.

 

yea i think this one was marked "R".. i'll double check tomorrow. i mean i know how it's supposed to look against the car, but i didn't actually pick the one i found up, i was in the trunk for other reasons.

 

Just got a 90 maxima...trying to get it running right and looking for a good deal....do you have the n60 maf and ecu...shipped to 01151

 

er.. is the "n60" maf what the car came with stock? if so, yes. $30 shipped.

 

ill take all 4 - how much you want for them shipped to 11741

 

Update, I got the splash guard for free at the junkyard, wasn't even going there for that but hey it was free. I'm still taking the side marker, and the license bracket thingy. Just tell me your price so I can transfer the money. thanks

 

$35 shipped

also $35 shipped


either of you need my paypal addy? PM me for it if you do.

 

Sent an eCheck via paypal. you should get the details via email.

 

yea. i'll get your stuff out once it clears.

 

factory mud flaps?

 

$35 shipped and you might need a few of these http://www.courtesyparts.com/63830f-...4-p-56168.html cuz some of mine broke since they are not easy to take out without breaking.

 

oops i think i forgot to respond do you. let's say $25 shipped

 

sounds good - and good call on those white grommets ^ i think i need a few of those

paypal?