CAN-Other 1992 Maxima SE parts car
#82
For some reason my paypal account says my bank isn't authorizing me to send money to anyone. I'll try again in the morning. If not then definetly Monday I know my check will clear. Damn I was hoping to get this out of the way today! I got injectors to order!
#88
Matter of fact here is the confirmation email I got.
You have initiated a payment for $30.00 USD to seand!cksaet@hotmail.com. This payment will be completed once the recipient has accepted the payment.
It may take a few moments for this transaction to appear in the Recent Activity list on your Account Overview.
Payment details
Amount: $30.00 USD
Transaction Date: November 28, 2010
Transaction ID: 7H658817R18165512
Subject: You've got money!
Message:
for thermo housing & speed sensor plug.
You have initiated a payment for $30.00 USD to seand!cksaet@hotmail.com. This payment will be completed once the recipient has accepted the payment.
It may take a few moments for this transaction to appear in the Recent Activity list on your Account Overview.
Payment details
Amount: $30.00 USD
Transaction Date: November 28, 2010
Transaction ID: 7H658817R18165512
Subject: You've got money!
Message:
for thermo housing & speed sensor plug.
#91
Senior Member
Thread Starter
iTrader: (8)
Join Date: Sep 2008
Location: St. John's, NL, Canada
Posts: 1,370
It still never worked man. It say you initiated a transaction, I never accepted it cause I didn't get any notification. It goes straight to my phone and I haven't gotten a thing.
"PayPal balance: $2.59 CAD"
I didnt receive any monies.
Make sure it's yahoo.ca and not .com
So, in saying that, be sure to type it in correctly. Copy and paste this but replace the '!' with an 'i"
seand!cksaet@yahoo.ca
Hopefully we can get this going.
"PayPal balance: $2.59 CAD"
I didnt receive any monies.
Make sure it's yahoo.ca and not .com
So, in saying that, be sure to type it in correctly. Copy and paste this but replace the '!' with an 'i"
seand!cksaet@yahoo.ca
Hopefully we can get this going.
#92
It still never worked man. It say you initiated a transaction, I never accepted it cause I didn't get any notification. It goes straight to my phone and I haven't gotten a thing.
"PayPal balance: $2.59 CAD"
I didnt receive any monies.
Make sure it's yahoo.ca and not .com
So, in saying that, be sure to type it in correctly. Copy and paste this but replace the '!' with an 'i"
seand!cksaet@yahoo.ca
Hopefully we can get this going.
"PayPal balance: $2.59 CAD"
I didnt receive any monies.
Make sure it's yahoo.ca and not .com
So, in saying that, be sure to type it in correctly. Copy and paste this but replace the '!' with an 'i"
seand!cksaet@yahoo.ca
Hopefully we can get this going.
#96
Senior Member
Thread Starter
iTrader: (8)
Join Date: Sep 2008
Location: St. John's, NL, Canada
Posts: 1,370
Explain which "master switch" your are referring to?
Also, i'm having some trouble getting the t-stat housing off. I took the 2 bolts out. Disconnected the gas lines that were there, but it's like there is a bolt or something i'm missing cause this thing doesn't want to budge
Also, i'm having some trouble getting the t-stat housing off. I took the 2 bolts out. Disconnected the gas lines that were there, but it's like there is a bolt or something i'm missing cause this thing doesn't want to budge
#97
Explain which "master switch" your are referring to?
Also, i'm having some trouble getting the t-stat housing off. I took the 2 bolts out. Disconnected the gas lines that were there, but it's like there is a bolt or something i'm missing cause this thing doesn't want to budge
Also, i'm having some trouble getting the t-stat housing off. I took the 2 bolts out. Disconnected the gas lines that were there, but it's like there is a bolt or something i'm missing cause this thing doesn't want to budge
#98
Senior Member
Thread Starter
iTrader: (8)
Join Date: Sep 2008
Location: St. John's, NL, Canada
Posts: 1,370
ohh lol...that master switch. yea I got it. I'll pull that off. That only takes a second. As for the thermostat housing, I never knew that there wwas RTV holding it into place lol...that would be the culperate. Thanks
#99
#101
#104
Only way I know is bcuz I've had to replace once before and I rebuilt the entire motor.
#106
Senior Member
Thread Starter
iTrader: (8)
Join Date: Sep 2008
Location: St. John's, NL, Canada
Posts: 1,370
Ok. So, I would need the condenser, the switch, and are you referring to the pulley and all that too? I'm just trying to grasp EVERYTHING you need for this. Do i need to de-charge the ac or anything before removal? Nothing is going to like shoot out at me like a hot coolant line would if pierced or anything would it?
#107
there are 4 sensors and a couple of motors, harnesses, and the main ACC unit...kind of a big request i know but if u can become familiar with all the parts and its not out of ur way to take them off...id be interested, if u can find craig braces page it has the list on there...shouldnt need to deal with anything thats gonna blow up on you lol
#108
Senior Member
Thread Starter
iTrader: (8)
Join Date: Sep 2008
Location: St. John's, NL, Canada
Posts: 1,370
there are 4 sensors and a couple of motors, harnesses, and the main ACC unit...kind of a big request i know but if u can become familiar with all the parts and its not out of ur way to take them off...id be interested, if u can find craig braces page it has the list on there...shouldnt need to deal with anything thats gonna blow up on you lol
#109
this is the parts list from craig braces page (dont know why i didnt link you the first time)
Parts List:
Ambient Sensor (with harness)
Sunload Sensor
Intake Sensor (with harness)
In-Vehicle Sensor (with hose, harness, and aspirator)
Air Mix Door Motor (with harness)
Fan Control Amp (with harness)
4-wire harness for Intake Door Motor (don’t need the motor though)
Digital Control Unit (aka Auto Amp, with 2 large black harness and one small white harness)
L bracket on Max Cold Door Rod with plastic clip
L bracket for Temp Control Rod with plastic clip
Spring for Max Cold Door Rod bracket
and here is the new link to get to his ACC page
http://web.archive.org/web/200412292...a/ACC/ACC.html
if you read it all the way thru he cuts so much off for each harness so theirs still wire and connectors if it goes into another harness. Also pictures on his page
Parts List:
Ambient Sensor (with harness)
Sunload Sensor
Intake Sensor (with harness)
In-Vehicle Sensor (with hose, harness, and aspirator)
Air Mix Door Motor (with harness)
Fan Control Amp (with harness)
4-wire harness for Intake Door Motor (don’t need the motor though)
Digital Control Unit (aka Auto Amp, with 2 large black harness and one small white harness)
L bracket on Max Cold Door Rod with plastic clip
L bracket for Temp Control Rod with plastic clip
Spring for Max Cold Door Rod bracket
and here is the new link to get to his ACC page
http://web.archive.org/web/200412292...a/ACC/ACC.html
if you read it all the way thru he cuts so much off for each harness so theirs still wire and connectors if it goes into another harness. Also pictures on his page
#110
Senior Member
Thread Starter
iTrader: (8)
Join Date: Sep 2008
Location: St. John's, NL, Canada
Posts: 1,370
this is the parts list from craig braces page (dont know why i didnt link you the first time)
Parts List:
Ambient Sensor (with harness)
Sunload Sensor
Intake Sensor (with harness)
In-Vehicle Sensor (with hose, harness, and aspirator)
Air Mix Door Motor (with harness)
Fan Control Amp (with harness)
4-wire harness for Intake Door Motor (don’t need the motor though)
Digital Control Unit (aka Auto Amp, with 2 large black harness and one small white harness)
L bracket on Max Cold Door Rod with plastic clip
L bracket for Temp Control Rod with plastic clip
Spring for Max Cold Door Rod bracket
and here is the new link to get to his ACC page
http://web.archive.org/web/200412292...a/ACC/ACC.html
if you read it all the way thru he cuts so much off for each harness so theirs still wire and connectors if it goes into another harness. Also pictures on his page
Parts List:
Ambient Sensor (with harness)
Sunload Sensor
Intake Sensor (with harness)
In-Vehicle Sensor (with hose, harness, and aspirator)
Air Mix Door Motor (with harness)
Fan Control Amp (with harness)
4-wire harness for Intake Door Motor (don’t need the motor though)
Digital Control Unit (aka Auto Amp, with 2 large black harness and one small white harness)
L bracket on Max Cold Door Rod with plastic clip
L bracket for Temp Control Rod with plastic clip
Spring for Max Cold Door Rod bracket
and here is the new link to get to his ACC page
http://web.archive.org/web/200412292...a/ACC/ACC.html
if you read it all the way thru he cuts so much off for each harness so theirs still wire and connectors if it goes into another harness. Also pictures on his page
#112
I don't care if they're in bad shape at all. I need them specifically for the purpose of painting them as I'm currently painting my stock wheels and have no caps for them
Of course, if those plastic tabs on the back are all broken I don't want them because they won't stay on the wheels
*edit* Nevermind, I don't need them, I completely forgot I had a set in the attic!
Of course, if those plastic tabs on the back are all broken I don't want them because they won't stay on the wheels
*edit* Nevermind, I don't need them, I completely forgot I had a set in the attic!
Last edited by James92SE; 12-08-2010 at 06:40 PM.
#120