World's fastest All Motor VE Auto does 14.57!!!
 

Here is my timeslip:

RT .644
60' 2.174
330' 6.083
1/8 9.341 @ 74.99
1/4 14.57 @ 93.68

I recently installed a high stall torque converter and finally hit the track. I'd say I shaved 3 tenths in the 1/4 mile with this TC. My 60' went from an average of 2.35 to 2.20s. So I was able to shave .15 in the 60' alone. Not too shabby.

For full details on conditions and mods, please refer to the thread I made in the 1/4 mile forum:

http://forums.maxima.org/showthread.php?t=296357

But I had to post this in the 3rd gen forum since I want to let everybody know what a VE Auto is capable of. VE POWER! :D

awesome times Aaron. the VE is just sick. :thumbsup:

did ya stick the air filter threw the drivers headlight? hehehe.

Sweet!

Oh yeah, I did the same setup as I always have before. But this time, I had 23" BFG drag radials and high stall torque converter.

Hey Aaron, I heard you did a 14.5????? is it true, is it true? :p


;)

very nice time

EXCELLENT!

:drool:

Keep up the good work.

how do you know you're the world's fastest?? thats like the World Series...the winning team are the world champs of baseball, but they only play teams from the US?? (j/k) :laugh: :p

just being stupid...you know you get nothing but props from me man, you proved us wrong waaaaaaay back when we said no auto would see 14's and now you're taking it further...nice work as usual Aaron!!! :bowdown: your new liscence plate--> "FUC5SPD"

Thanks everyone for their support. I don't 100% know that I'm the world's fastest NA VE Auto, but I think it's safe to assume that since the 2nd place award for that title goes to BluMax at 15.3. :) Until someone can step up and prove me wrong, I will just keep saying world's fastest.

My next goal is to become the world's fastest all motor VE... including 5spds. Can you believe that record is only a 14.3 set by Bryan H WAYYY back in the day? My goal after that is to become the world's fastest NA 3L Maxima auto, which is held by 96sleeper at a 14.2. After that, I will probably just go nitrous and be the worlds fastest 3rd gen Maxima with a record of 13.8 held by Bryan H while spraying on street tires and another VE Auto spraying a 60 shot, I forget his name. After that, I am going to follow Jime's road. :D He did pave the way for a lot of automatics.

edit... Haha, nice lisence plate!! I was thinking "AUTO ZZ". I just want everybody to know that they just got beat by an automatic granny car. muwaha! Any more suggestions on vanity plates for me?

and after that....... :laugh:

but seriously...as of all CURRENT and RUNNING VG and VEs auto/5spd on this board I think YOU are the fastest...am I wrong?? I don't see any other VG/VEs running near you?

and oh yeah... you're a Track Whore

Yes I'm a serious track whore. As far as I know, I am the faster current all motor 3rd gen. I think there is a guy name Seth or some that did 14.5s and he is at higher altitude. Bryan isn't anymore.

But I do know that I am the fastest EVER all motor automatic 3rd gen.

was this done on a stock ecu or jwt besides the zem

Nice run man. :thumbsup:

IIRC it was done on a stock ECU :)

Stock ECU :D

Hey Arron amazin job at the track congrads! I am Gonna Get Ma 90 VG Auto on the track this summer once I finish installin ma new engine. We estimating it is gonna have round 250 hp. I already got an UR Undrive. Pulley,Headers\Downpipe, High-Flow Cat , Greddy Cat Back, CAI, Vitek Wires+Iridium Plugs, Alumnium Flywheel, And Rebuilt Tranny. Right now the new heads, throttle body , and intake manifold are gettin ported by a shop. I now just gotta order the new JWT Cams and Racing Pistons and I am gonna be good to go. We gonna swap out the old engine put in the new, get the JET chip up n workin and set it loose on the track. When i get a time slip I made sure to post it up for everyone. (We are still considerin a 5 Speed swap but auto's are where it is at!)

Aluminum flywheel? Autos don't have flywheels. And plus, the stock driveplate is pretty dang light to begin with. But with those mods, only expect it to have a best of 200-210 HP. I would really be surprised if it ran faster than low 15s. Good luck at the track.

I Am Hoping To Run A 14.90-14.99 Somewhere in there. I Still :bowdown: to your car Good Job! Also ya gotta remember mine is only a VG 30 less ponies outta the factory...I would not be dissapointed with that time at all. We will see at the track. What is the fastest a VG has run at the track?

How do you have a clue what you'll run? You've never been to the track. Why are you doing a JET ECU with JWT cams?

Just take it one step at a time with modding. It's ok to build a motor, it just sounds like you're doing an aweful lot all at once and you don't know what works and what doesn't.

High 14s would be a BIG step in an all motor VG Auto. Best of luck to you. Keep in mind that the all time fastest NA VG Auto Maxima is a 15.4 I think. It had a lot of stuff done to it, including cams. It was Nevin aka SkyMax I believe. If you beat that, then that will be something.

I Am Not really sure what I am gonna run at a track since I am a newbie I hope i can pick up a few pointers here and there. I stopped messin round on the streets since ma best friend flipped his Integra and past away a few months ago. I am aimin to build a legit track car, the shop i am workin with is helpin me as much as possible. And, i wrote the wrong thing by axident i mean JWT ecu not JET.

Sorry about your friend. If you want pointers from me, they are:

1) Reduce weight as much as you can
2) Get a good suspension if you plan on running street tires at the track
3) GET SLICKS and don't mess around with traction issues
4) Don't race your car unless it's running FLAWLESSLY. No sense in blowing your motor your first day out.

*edit* 5) Get a valve mod recalibration (shift kit) www.maximumtuning.net

Your tranny doesn't like high revs and lots of power. If you plan on racing it without the tranny blowing, put a shift kit in it and a tranny cooler. A tranny temp gauge is good to keep an eye on things. Don't let it run much over 160 degrees. Also, try to rebuild your tranny with tougher than OEM parts. You will need that bulletproof tranny.

good luck you're gonna need more than whats on your list to even break a 15.5 in a VG auto...250hp you can forget about, full bolt-ons and piggy back fuel and ignition tuning only yeilds around 160-170whp in the auto(been there, seen that)...getting an extra 80fwhp to meet your goal N/A will be nearly impossible. VG30E needs major work to be anything near productive on the drag strip...or let alone the real street racing world almost. (bitter ex-VG auto owner :mad: )

I still rule you on the highway :gotme:

:) It was good hanging out with you again, I had LOTS of fun, Andrew cant wait to do more and go back, he is addicted now and that is scary.

But in all honesty "when are you going to stop f*ing around and ___ ___." (you know what to put there. I want you to be KILLING!!!

GET NITROUS!! lol I know I know. But I will be ready for it when I do. Right now, I'm not 100% ready.

Dayum dude! You're lucky your tranny is still in one piece. Nice work.

Wha???! With the JET ecu, he should be at least 300hp!

you're right, I forgot...JET uses dilithium crystals in their chips as opposed to flux capacitors...I'm such an idiot :bonk:

I'm gonna go ahead and call :bs:. I want to see the time slip scanned.




















j/k :shy: congrats man...that's just craaazzzyyy. Keep up the good work.

Dude! Where have you been? I haven't seen activity from you in a LONG time. Last time I spoke with you was when I was asking you to sell me your VE Auto JWT ECU. lol BTW, wanna sell it now? Serious. :D

I have a tranny cooler and I never let my tranny temp get above 160 degrees. And that is HARD to do in 115 degree Vegas heat. I have to drive around town blasting my heater and my cooling fans running on high speed just to keep it around 150.

My shift kit helps with keeping the temps down along with less slippage. But now I have a high stall torque converter and that will make me run hotter than ever. I'm not ready for Vegas summer heat.

I'm thinking of installing a bigger tranny cooler on my radiator. I can fit a 3/4" cooler that is more than TWICE the size of the one I have now. I'm sure it will help.

9 out of 10 tranny failures are due to heat. When mine blows up, it will be due to having too much HP going through it. lol But I try to take care of my stuff. Thanks for posting.

I've been looking in, but not posting much the last 6 or 8 months. Haven't done a show since Summerslam at E-town, NJ last July 4th weekend. My grandmother passed away about 5 weeks ago, so it's been tougher than normal lately. Gonna put the nice wheels on the old green monster this weekend and get it a bit cleaned up. Sits out all the time since I got the 2K3. It's getting rough around the edges, but still runs well. The winter's been tough on the old boby kit though.
:thumbsup:

For the guy that was looking at getting a VG NA into the 14's just drop this bad boy in....

http://www.hekimianracing.com/nissan3lna.html

Its only $8950....

lol

Brian :thumbsup:

Thats all hmmm not 2 bad at all only 9K I think i might just buy 2 , again a high 14 on ma VG is just a goal it actaully happening ...we see. That engine is crazy i was thinking more along the lines of this one though tell me what you think....http://www.hekimianracing.com/665BBC1240hp.html

very nice man :thumbsup:

Thanks man. How's your car running? You planning on hitting the track anytime soon? Without slicks, you won't have fun... lol.

I plan on taking the car to the track this month after I dyno. Then I will definitely looking to borrow some drag redials. I have my custom big brakes kit to put back on the car, so Im going to try to get the run in with 15" wheels before I mess with the brakes, but if running with slicks on a 3rd gen maxima is that much fun, Ill sell the brake Kit and invest in some slicks, and maybe a parachute :)

GET SLICKS!!! Without them, you will constantly wonder about what could have happened with slicks. With drag radials, you will be fighting traction SO bad. Even a stock VE 5spd has terrible traction issues on stock tires.

If you are going to spend the money on tires, they better be slicks. DRs are a waste of money for you.

Damn Aaron, I think you just need to be regulated for a quick second....:laugh:....Ve's are ok....but you cant roll up to a club like I can, and still run 14's at tha track...... :thumbsup: you did good !....but If I strip my car like yours, I might run a high 13....so easy on the VE power !... :thumbsup:

:laugh:...you have to admit that your car looks like Donalds hair.......:wall:

Reguardless of what you think, you you strip your car like me, you will only lose 120 lbs. 120lbs is good for about .15 in the 1/4 mile. That's it. I doubt it would get you in the 13s b/c I doubt you are running 14.14.

But if you got rid of the heavy wheels, speakers, and removed all your seats like me, then that has to be good for 3 tenths or so. Keep that in mind when you are at the point that you need 3 free tenths. :)

First off, I would say that I am running mid 14s. Until a VE Auto comes up to me and shows me a timeslip and pics of their car, then I will continue claiming to be the world's fastest VE Auto all motor Maxima. Why shouldn't I claim to be the world's fastest NA VE Auto? Any reasons? I've shaved over 2 full seconds from my stock 1/4 mile time. Not many people can say they've done that 'all motor' for ANY car with stock motor.

Now if I had nitrous or turbo and I was running 14.5s and claiming to be the world's fastest, then I would understand what you're saying. But I think I've come a long ways and no other NA VE Autos can do the times I'm doing.

I'm sorry, I don't get it. Is that suppose to be an insult or a compliment? Please clear this up as soon as possible. BTW, VE POWER! :D