Anyone make their own Angel eyes???
#1
Anyone make their own Angel eyes???
I know I have seen someone around here that made their own set of angel eyes out of acrylic rod. I finally found a source for clear rod here http://www.tapplastics.com/shop/product.php?pid=147
What do you tink on size?? I'm thinking 3/8th or 1/2 inch. Opinions?
What do you tink on size?? I'm thinking 3/8th or 1/2 inch. Opinions?
#4
Ya I searched again here and while reading throug an old post I found a link to a "how to". Pretty good one too http://www.geocities.com/jvxdriver/eagle_eyes.htm See what you think.
#6
Originally Posted by MyBlue92Maxima
can you explain how an accrilic rod will make angel eyes for me , cause if theres a way , this way seems inexpensive for those people like me who dont wanna spend 300 for the beemer lights
You sorta need mw headlights to put them into. I donno if you ever looked into your stok headlights. But thereisn't anything to mount the rings into. And if they were done with a stock headlight. It'll look pretty ghetto.
I just bought aftermarket e36's with the rings already installed. but they're not ccfl or led. Their 194 bulbs. I wish i had ccfl's.
#7
if you buy the bmw headlights with the angel eyes and you go to put them in the max , dont they not sit right , i saw a 3rd gen and the guy had to cut out parts of his radiator housing and parts of the support on the sidees of the lights and ****.. cause they are longer in the back , link me to what you have if they are a direct fit.. ive been wanting to do the angel eye thing for a while now. just could never figure out what to get to do it.
Thread
Thread Starter
Forum
Replies
Last Post
hez8813
5th Generation Maxima (2000-2003)
11
03-12-2020 12:06 AM
NERDJUSTBNME
8th Generation Maxima (2016-)
12
09-30-2015 03:20 PM
carid
Group Deals / Sponsors Forum
0
09-17-2015 05:00 AM