quick helpe removing o2 sensor
 

so..i thought i new how to remove my o2 sensor but i was wrong. i have a 92 gxe is there a right up on how to remove it? i sold it and need to get it out.

Vise grips, hammer, 1 margarita, 2 wacks, margarita salt if your the type, and done.

A write up to remove an o2 sensor?

Wheaties/Wrench/lefty loosey...Done..:)

ok i guess it is that easy.....ill fiddle with it

Liquid wrench the night before, warm up the car a bit (2 mins) then follow instructions above

You live pretty close if you need help I can come over its super easy to take off. I did mine last year took about 30 mins :hmmph:

i did mine too with a pair of roll-on ramps, a wrench, and however much time it took the engine running to line up with the ramps and get the car up them (was tough to baby the throttle to get up them and not roll off the end when facing downhill)

unfortunately i still get the ECU code for it, so i probably have a bad wire somewhere as well.

you can undo the harness before spinning loose the sensor body
so the wire dont twist . the plug is mounted into the rear of the crossmember by the rear motor mount and the wire is push snapped into the crossmember too