elusivemax93

Does anyone know the exact wires needed to fully wire in a compustar alarm like this one http://www.compustar.com/products/2W900FMR.htm

see my biggest problem for me was going in and removing all the wires from the previous alarm the owner before me had in it then removed but didn't remove the wiring. I have all the wiring diagrams for the maxima i need but still am confused on how the wires in the wiring diagram in the compustar manual. I am right now in basic electrical in college but still know that the VE maxima's have alot of wiring in them and can become confusing. Any help would be greatly appreciated

Hectic

iTrader: (20)

If it's already pre-wired for another aftermarket alarm, the bulk of the work is already done for you. That is, if you can figure out which wires from the old alarm are what. Then just connect the corresponding wire from the new alarm to ends of the wires from the old alarm. If it's possible, if not, just start from scratch. Craig B's site has the locations and color codes of wirings required for alarm installation on his web site. Google "Craig Brace" and find his Maxima page.

elusivemax93

thanks and no the pre wiring is not any longer in the vehicle what was left i removed and it wouldn't of been any use as the alarm they had installed in the car was a cheap one compared to the one im installing.

internetautomar

iTrader: (30)

eh, I just uninstall alarms. they are nothing but headaches.
though it did help me get a 96 I30 for $400