MIKE91GXE-R3.0

I have a 91 max gxe and i bought some clear corners for it, they did not come with insructions and i dont know how to put them on. Can someone please give me the directions to do this modification thanx

SEguy182

just pull and plug, open the hood and there is a screw above the headlights for each sidemarker, unscrew that and apply pressure to the back of the sidemarker from the outside, once is it out, unplug the bizulbs and plug them into the new clear, and repeat process on the otherside, the sidemarkers might be alittle hard to get out, dont force them, take it easy...

matt92gxe

there are also instructions in your owner's manual on how to remove the corner lamps

UTMikey29

When you detatch the harness from the lamp itself, dont be afraid of breaking the old lamp (The plastic 'nub' that extends from the lamp attaching the wires to it). Give it a good pull, but make sure not to damage the wires. It really is just unscrewing the one screw on top, pulling lamp out, disconnecting.....then do the opposite with the new lamp. Should take about 5 mins to do both tops

JDwyer2821

**** I broke mine