Another Parts Car: 95 SE Auto
Originally Posted by MAXSE5SPD
i need the flange from where the muffler meets the piping.you got one?
Originally Posted by wunfstmax
can i get the belt tensioner, and boost sensor?
Originally Posted by fanaticrockford
$30 for the belt tensioner. I will have to check on the boost sensor. Early 95's didn't come with them but i just ran across one in my shop. Let me see if i can find it again.
Cool, just let me know
Originally Posted by wunfstmax
Cool, just let me know
Hey on one of your other cars we talked about getting an inner fender guard for my passenger side, and the stupid little clips that go onto the fender. This car have the part? I need that and the one that covers the side of the engine too. Thanks
Originally Posted by foxracing12
Hey on one of your other cars we talked about getting an inner fender guard for my passenger side, and the stupid little clips that go onto the fender. This car have the part? I need that and the one that covers the side of the engine too. Thanks
Originally Posted by ghostmax301
still have the fog light stalk?
If not, how much for the rear spoiler?
If not, how much for the rear spoiler?
The rear spoiler i still have to check that the bolts will not break removing it.
Originally Posted by wildbillx
do you have the stock tail lights? I need a driver side. Let me know thanks.
You got the black trunk release switch located on the door driver side door handle? I need the switch and its housing to install on my door, it's got a hole with no housing or switch in it. Pretty ugly.
Also need all 4 "good" condition rubber bushings on the cross member where it's bolted onto the chassis. The cross member I'm talking about is the long pig iron thing that the motor mounts sit on. There are 4 bolts to screw them into the chassis, and the rubbers are to dampen the bolts and make sure they don't move. I need the rubbers.
PM me the prices shipped to 70808 in Baton Rouge, LA
Thanks
-Peter-
Also need all 4 "good" condition rubber bushings on the cross member where it's bolted onto the chassis. The cross member I'm talking about is the long pig iron thing that the motor mounts sit on. There are 4 bolts to screw them into the chassis, and the rubbers are to dampen the bolts and make sure they don't move. I need the rubbers.
PM me the prices shipped to 70808 in Baton Rouge, LA
Thanks
-Peter-
Originally Posted by GodFather
You got the black trunk release switch located on the door driver side door handle? I need the switch and its housing to install on my door, it's got a hole with no housing or switch in it. Pretty ugly.
Also need all 4 "good" condition rubber bushings on the cross member where it's bolted onto the chassis. The cross member I'm talking about is the long pig iron thing that the motor mounts sit on. There are 4 bolts to screw them into the chassis, and the rubbers are to dampen the bolts and make sure they don't move. I need the rubbers.
PM me the prices shipped to 70808 in Baton Rouge, LA
Thanks
-Peter-
Also need all 4 "good" condition rubber bushings on the cross member where it's bolted onto the chassis. The cross member I'm talking about is the long pig iron thing that the motor mounts sit on. There are 4 bolts to screw them into the chassis, and the rubbers are to dampen the bolts and make sure they don't move. I need the rubbers.
PM me the prices shipped to 70808 in Baton Rouge, LA
Thanks
-Peter-
$20 shipped if i do have the housing.
Originally Posted by ghostmax301
ok, let me know
Originally Posted by GodFather
sounds great. keep looking to make sure. I wouldn't want to put a tan cookie on my black interior.
Originally Posted by fanaticrockford
Well i couldn't find one but i will still sell you one.I will take it out of one of the cars i'm selling. I will just paint one of my tan ones to put in it's place.
Sounds great, what's my shipped total to pay? what's the paypal addy. Money will be on it way soon.
Originally Posted by GodFather
Sounds great, what's my shipped total to pay? what's the paypal addy. Money will be on it way soon.
Thanks, money sent through paypal. Shipping addy is shown on paypal, too. If else, please let me know. I think at the end of next month, I will quote you on some big parts. Thanks for the great deal.
-Peter-
-Peter-
You cannot accept pm's until you have 15 posts. I do still have the climate control though. Send me an email joecook@cableone.net
Originally Posted by teezo
Do you still have the climate control? If so I am interested, PM me. Thanks!
Originally Posted by DragonMaxima
fanaticrockford,
Did you already sell the trim piece for the radio? I'm looking for the brackets and trim piece.
Thanks.
Did you already sell the trim piece for the radio? I'm looking for the brackets and trim piece.
Thanks.
I could use the following parts if you have them from your various parts cars:
- Left corner parking light next to the headlight (95 or 96 version)
- Front License Plate Bracket (97-99 version)
Let me know how much shipped to 08817. Thanks JP
- Left corner parking light next to the headlight (95 or 96 version)
- Front License Plate Bracket (97-99 version)
Let me know how much shipped to 08817. Thanks JP
maxima 95 rear 1/4 glass pass, evaporator.
Originally Posted by fanaticrockford
Any more interest?
Hi, i need the little glass that goes on the rear door, not the door window but the small window on the rear of the passenger side and the Air conditioning evaporator,, is the one that goes under the dash on the passenger side, is like a little radiator that have two conections from the engine and can be pulled from the inside of the car once you removed A/C pressure and both hoses from engine. let me know thanks GC.
Originally Posted by blackhand
Hi, i need the little glass that goes on the rear door, not the door window but the small window on the rear of the passenger side and the Air conditioning evaporator,, is the one that goes under the dash on the passenger side, is like a little radiator that have two conections from the engine and can be pulled from the inside of the car once you removed A/C pressure and both hoses from engine. let me know thanks GC.
Originally Posted by JPMax
I could use the following parts if you have them from your various parts cars:
- Left corner parking light next to the headlight (95 or 96 version)
- Front License Plate Bracket (97-99 version)
Let me know how much shipped to 08817. Thanks JP
- Left corner parking light next to the headlight (95 or 96 version)
- Front License Plate Bracket (97-99 version)
Let me know how much shipped to 08817. Thanks JP
Originally Posted by Graem
i have a 97 GLE and i need a passenger side heated/power black mirror, would your fit?



