WTB:: Keyless Entry Remotes
 

I need a remote for my maxima. never knew about reprogramming so i tempted and threw away my old working one about 2 years ago. LOL

Did some reading and tested, now need 1 or 2 remotes.

PM ME or
AIM- vuiskool

eeebayyyy....

Where did you get the info on how to program the remote?

//Keith

its in the stickies

For some reason I can't find the thread. can someone either email me the link or post the link in here.

//Keith

1. Enter the car; close and lock all doors.
2. Put the key in ignition at least 6 times in 10 seconds and the hazards will flash twice. You just erased whatever remote settings were currently in the remote fobs.
3. Turn the key to the ACC position
4. Press the door lock button on the remote. The hazards will flash twice again.
5. Open drivers door and it will exit programing mode. To program more than one remote, skip this step and manually unlock the door and re lock the car with the knob on the driver's door, near the window switches. Then press lock on the second remote and if you see the hazards flash twice again, you have both remotes programed.

Hope this helps...it worked for me