Need to move some parts laying around the garage!
10-21-2007, 09:42 PM
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (31)
Join Date: Dec 2003
Location: Church Hill, TN
Posts: 174
Need to move some parts laying around the garage!
JWT ecu turbo program Z32 MAF,370cc inj ,7000 rpm extender.Bought this when I was thinking of going turbo. $400 shipped.This ecu from a manual transmission don't know if it will work in an auto.
SOLD!!
Techno square ecu from my 96 max auto $325 shipped.This will work if you have a manual tranny also.
SOLD!!
SOLD!!
Techno square ecu from my 96 max auto $325 shipped.This will work if you have a manual tranny also.
SOLD!!
Last edited by cw96; 10-25-2007 at 04:52 PM.
[/URL]
10-21-2007, 09:43 PM
#3
Supporting Maxima.org Member
Thread Starter
iTrader: (31)
Join Date: Dec 2003
Location: Church Hill, TN
Posts: 174
A32 maf that I purchased off a fellow orger. I was going to use to make another BBMAF but I have too many now. $35 shipped.
SOLD!!
I have 2 very dirty 4th gen throttle bodys.Work fine just nasty looking.$25 shipped each.
SOLD!!
I have 2 very dirty 4th gen throttle bodys.Work fine just nasty looking.$25 shipped each.
Last edited by cw96; 10-28-2007 at 07:08 PM.
10-21-2007, 09:44 PM
#4
Supporting Maxima.org Member
Thread Starter
iTrader: (31)
Join Date: Dec 2003
Location: Church Hill, TN
Posts: 174
Set of 96 factory tail lights inners and outters $50 shipped,
Complete set of power window switches $30 shipped.
URL=http://i240.photobucket.com/albums/ff284/cwinegar/carparts012.jpg]
[/URL]
Complete set of power window switches $30 shipped.
URL=http://i240.photobucket.com/albums/ff284/cwinegar/carparts012.jpg]
[/URL]
Last edited by cw96; 10-24-2007 at 06:24 AM.
10-21-2007, 09:45 PM
#5
Supporting Maxima.org Member
Thread Starter
iTrader: (31)
Join Date: Dec 2003
Location: Church Hill, TN
Posts: 174
Hazard switch,clock,rear defogger assembly works great $35 shipped.
Manual climate control assembly with brakets .Works great except the a/c button gets stuck.$25 shipped.
SOLD!!
Manual climate control assembly with brakets .Works great except the a/c button gets stuck.$25 shipped.
SOLD!!
Last edited by cw96; 10-25-2007 at 12:44 PM.
10-21-2007, 09:45 PM
#6
Supporting Maxima.org Member
Thread Starter
iTrader: (31)
Join Date: Dec 2003
Location: Church Hill, TN
Posts: 174
Adaptor plate for bolting 4th gen throttle body to VI00.Bought this from stephenmax and didn't use after getting dek motor that had a throttle body already on it.This might be sold but if I don't hear from the guy in a coulpe of days it's first come first serve.$45 shipped.
SOLD!!
A33 maf with breather box assembly $65 shipped.
SOLD!!
A33 maf with breather box assembly $65 shipped.
Last edited by cw96; 10-25-2007 at 12:45 PM.
10-21-2007, 09:48 PM
#7
Supporting Maxima.org Member
Thread Starter
iTrader: (31)
Join Date: Dec 2003
Location: Church Hill, TN
Posts: 174
Set 4 16 inch factory rims with potenza mounted on them.Wheels have normal were and tear not perfect but look good.2 of the tires still have over half the treads left on them the other 2 have less than half.One of the tires has a screw in it as you can tell from the pictures and will need to be pluged but it still holds air tires not flat.I would prefer these to be picked up as shipping would be more than what I'm selling the tires for.Asking $125.
I also have a set of steel rims don't have pics.$30 picked up.
I also have a set of steel rims don't have pics.$30 picked up.
10-21-2007, 11:17 PM
#8
IT NEVER FAILS!! WHEN THERES SOMETHING THAT I REALLY NEED IT ALWAYS COMES WHEN I DONT HAVE THE DOE!!!!!
GOOD LUCK WITH THE SALE THAT TURBO ECU WILL PROBABLLY BE GONE TOMORROW, IF YOU STILL HAVE IT IN A COUPLE OF WEEKS AND I GET MY MONEY RIGHT ILL TAKE IT OFF OF YOUR HANDS!
GOOD LUCK WITH THE SALE THAT TURBO ECU WILL PROBABLLY BE GONE TOMORROW, IF YOU STILL HAVE IT IN A COUPLE OF WEEKS AND I GET MY MONEY RIGHT ILL TAKE IT OFF OF YOUR HANDS!
10-22-2007, 06:18 AM
#10
Supporting Maxima.org Member
Thread Starter
iTrader: (31)
Join Date: Dec 2003
Location: Church Hill, TN
Posts: 174
The bought the axles new a couple of years ago but they have been out of the car for almost a year so I'd say at least 20,000 miles .Paypal is curtis.winegar@gmail.com for the climate control.
10-22-2007, 09:34 AM
#12
Supporting Maxima.org Member
Thread Starter
iTrader: (31)
Join Date: Dec 2003
Location: Church Hill, TN
Posts: 174
Don't go to D.C. made once a year but it only takes me about 6 to 6 1/2 hours to drive.I will be going to Cleveland in the next week or two so the closest I would be going to your area is Wytheville to get on I-77. Sorry.
10-22-2007, 03:30 PM
#14
Supporting Maxima.org Member
Thread Starter
iTrader: (31)
Join Date: Dec 2003
Location: Church Hill, TN
Posts: 174
The technosquare ecu has the timing advanced and fuel map changed alittle.As far as horsepower it is the equivalent of adding a y-pipe about 8 to 15 horsepower depending on your mods. Basically same gains as the JWT ecu but without the extended rev limiter
10-23-2007, 03:19 PM
#16
Member
Join Date: Apr 2006
Location: MD
Posts: 42
question about 96 technosquare ecu,
1) I believe this will work on a 95 auto (gxe) with no codes. Can you confirm this?
2) When you said the fuel mapping is changed alittle, what do you mean by that? I thought the technosquare ecu was the same programming throughout all the ecus made for non-turbo maximas and there was an option for extended rev or was it actually specific to what mods have been done?
Thanks!
1) I believe this will work on a 95 auto (gxe) with no codes. Can you confirm this?
2) When you said the fuel mapping is changed alittle, what do you mean by that? I thought the technosquare ecu was the same programming throughout all the ecus made for non-turbo maximas and there was an option for extended rev or was it actually specific to what mods have been done?
Thanks!
Last edited by h22enjen; 10-23-2007 at 03:21 PM.
10-24-2007, 05:04 AM
#17
Supporting Maxima.org Member
Thread Starter
iTrader: (31)
Join Date: Dec 2003
Location: Church Hill, TN
Posts: 174
The T/S is the g-force program they didn't have different programs for the mods on your car at the time I sent this off to technosquare (I think this was 3 or 4 years ago).I called them when I first sent my ecu to them asking about running this with nitrous or if they had a separate program for it and I vaguely remember the guy saying they only had one program for my ecu at the time and I would have to make a switch between the modified ecu and a stock one for the nos.Of course this was over 3 years ago and I getting old so my memory is a little fuzzy.Of course I don't know what they have available today.As far as the cel in the 95 I don't know.I had this in my 97 and didn't have a cel.I think the 95-96 didn't have the downstream 02 sensor and the 97-99 did and that was one of the main things that was causing cel when using this 95-96 ecu in the 97-98 maxs but like I said I didn't have one in my car.
Thread
Thread Starter
Forum
Replies
Last Post
MR2 T'd
5th Generation Classifieds (2000-2003)
6
07-09-2021 05:06 AM