4th Generation Classifieds (1995-1999) The highly sought after variable intake may be a click away.

If You Need A Part Let Me Know

Old Jan 31, 2008 | 11:14 AM
  #121  
komik's Avatar
Member
 
Joined: Jan 2008
Posts: 268
From: Dallas, TX
I am looking for the following parts for a 96 Black / Gray 5 Spd SE

- Shifter Boot (Black)
- Shifter Trim (Black)
- Coil pack to fit cylinder 2
- Spoiler, no color preference
- Turn signal switch w/ integrated fog light switch
- Passenger side axle shaft in good condition
- Front Driver's window regulator

Zip Code: 75605
Old Jan 31, 2008 | 11:40 AM
  #122  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by komik
I am looking for the following parts for a 96 Black / Gray 5 Spd SE

- Shifter Boot (Black)
- Shifter Trim (Black)
- Coil pack to fit cylinder 2
- Spoiler, no color preference
- Turn signal switch w/ integrated fog light switch
- Passenger side axle shaft in good condition
- Front Driver's window regulator

Zip Code: 75605
I have the following.

$20 - Coil pack to fit cylinder 2
$30 - Turn signal switch w/ integrated fog light switch
$30 - Front Driver's window regulator
- Spoiler, no color preference
All the spoilers i have have broken mounting bolts and the brake light leds don't work.
Old Jan 31, 2008 | 12:07 PM
  #123  
xmaxima95x's Avatar
Junior Member
iTrader: (2)
 
Joined: Jun 2007
Posts: 29
From: Rogers, Arkansas
Bose rear speakers?
Old Jan 31, 2008 | 12:15 PM
  #124  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by xmaxima95x
Bose rear speakers?
I may have them. I just need to make sure there not blown.
Old Jan 31, 2008 | 12:58 PM
  #125  
xmaxima95x's Avatar
Junior Member
iTrader: (2)
 
Joined: Jun 2007
Posts: 29
From: Rogers, Arkansas
Originally Posted by fanaticrockford
I may have them. I just need to make sure there not blown.
If you have them and they work gimme a quote bud
Old Jan 31, 2008 | 08:43 PM
  #126  
Scott LaRock's Avatar
Senior Member
iTrader: (5)
 
Joined: Mar 2005
Posts: 781
right side fog light for a 95/96, pm me the price whenever you have one.
Old Feb 1, 2008 | 05:01 PM
  #127  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Keep the requests coming. I have alot of parts.
Old Feb 2, 2008 | 01:01 AM
  #128  
Akumachan's Avatar
I never narc'd on nobody.
iTrader: (12)
 
Joined: Sep 2004
Posts: 956
Originally Posted by fanaticrockford
$10 shipped
Sounds like a deal! Got a paypal addy?
Old Feb 2, 2008 | 01:45 AM
  #129  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by Akumachan
Sounds like a deal! Got a paypal addy?
josephcook@cableone.net
Old Feb 2, 2008 | 10:01 PM
  #130  
ti2tmax's Avatar
Has his VINs memorized
iTrader: (18)
 
Joined: Apr 2005
Posts: 763
From: Imperial Beach, CA
Front bose speaker? 04553
My right front is farting
Thanks man
Old Feb 2, 2008 | 11:10 PM
  #131  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by ti2tmax
Front bose speaker? 04553
My right front is farting
Thanks man
I'll check on it.
Old Feb 2, 2008 | 11:13 PM
  #132  
Digitized's Avatar
Senior Member
iTrader: (9)
 
Joined: Mar 2005
Posts: 1,318
any news on shipping black 95-96 Grille to Canada?
Let me know via PM..
thanks,
KL
Old Feb 3, 2008 | 01:33 AM
  #133  
kaneda_77's Avatar
Member
iTrader: (5)
 
Joined: Sep 2006
Posts: 254
From: Hawaii
let me know if you still got the bose deck. thanks
Old Feb 8, 2008 | 01:06 AM
  #134  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Keep the requests coming.
Old Feb 8, 2008 | 06:39 PM
  #135  
96mAx2fast's Avatar
Senior Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 1,036
Fanatic, I emailed you about the airbags. I also need a front bumper (95 SE) dark color (green preferably) and a metal bar thingy that goes from one fender to another. It's kinda what the hood sits on. Not sure what it is called...
Old Feb 8, 2008 | 06:47 PM
  #136  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by 96mAx2fast
Fanatic, I emailed you about the airbags. I also need a front bumper (95 SE) dark color (green preferably) and a metal bar thingy that goes from one fender to another. It's kinda what the hood sits on. Not sure what it is called...
I emailed you back.
No good front bumpers. Your referring to the bar that the headlights sit on? The molding under the headlights are bolted to it?
Old Feb 8, 2008 | 07:40 PM
  #137  
96mAx2fast's Avatar
Senior Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 1,036
No,the bar is is higher than the headlights it is where the top of the grill is. It is pretty solid metal and they go from the front of one fender to the front of the other side up top...
Old Feb 8, 2008 | 07:43 PM
  #138  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by 96mAx2fast
Fanatic, I emailed you about the airbags. I also need a front bumper (95 SE) dark color (green preferably) and a metal bar thingy that goes from one fender to another. It's kinda what the hood sits on. Not sure what it is called...
Originally Posted by 96mAx2fast
No,the bar is is higher than the headlights it is where the top of the grill is. It is pretty solid metal and they go from the front of one fender to the front of the other side up top...
That piece is the upper radiator support and is welded on.
Your better off buying it new.
Old Feb 9, 2008 | 03:46 AM
  #139  
Product_Of_Korea's Avatar
Senior Member
iTrader: (8)
 
Joined: Nov 2004
Posts: 2,208
From: BFE, Minnesota
i need a eu full harness. do you have?
Old Feb 9, 2008 | 04:45 AM
  #140  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by lock0002
i need a eu full harness. do you have?
Your looking for an engine harness to wire in the emanage or you just want the pigtal for the ecu?
Old Feb 9, 2008 | 05:59 AM
  #141  
samarooa's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2008
Posts: 190
From: QUEENS NY
springs shipped tp brooklyn ny 11226
Old Feb 9, 2008 | 07:09 AM
  #142  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by samarooa
springs shipped tp brooklyn ny 11226
Your looking for stock springs? If so i have some from a gle.
Old Feb 9, 2008 | 07:16 AM
  #143  
adriena's Avatar
Senior Member
iTrader: (6)
 
Joined: Oct 2006
Posts: 445
From: Cincinnati, OH
Originally Posted by fanaticrockford
None currently but give me a few days and i should.

PM sent


I will check.
didn't recieve pm
Old Feb 9, 2008 | 07:23 AM
  #144  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by adriena
didn't recieve pm
We discussed both the axle and window. Your better off buying the axle new and you were suppose to get back to me on the window.
Old Feb 9, 2008 | 10:21 AM
  #145  
adriena's Avatar
Senior Member
iTrader: (6)
 
Joined: Oct 2006
Posts: 445
From: Cincinnati, OH
oh yeah the window i completely forgot about that. i need these parts first. sorry about that.
Old Feb 9, 2008 | 01:23 PM
  #146  
Product_Of_Korea's Avatar
Senior Member
iTrader: (8)
 
Joined: Nov 2004
Posts: 2,208
From: BFE, Minnesota
just the pigtail

like this one

Old Feb 9, 2008 | 06:09 PM
  #147  
samarooa's Avatar
Senior Member
iTrader: (1)
 
Joined: Jan 2008
Posts: 190
From: QUEENS NY
Originally Posted by fanaticrockford
Your looking for stock springs? If so i have some from a gle.
i meant shocks
Old Feb 9, 2008 | 08:04 PM
  #148  
ajcool2's Avatar
Senior Member
iTrader: (43)
 
Joined: May 2004
Posts: 10,550
From: Baltimore, Md
Do you have a 97-99 chrome grill?
Old Feb 9, 2008 | 09:04 PM
  #149  
MrDicks95SE's Avatar
Offset Is Everything.
iTrader: (23)
 
Joined: Sep 2003
Posts: 9,417
From: SoCal
any updates on those O2 sensors? thanks.
Old Feb 10, 2008 | 08:38 AM
  #150  
Blackmax1924's Avatar
Senior Member
iTrader: (7)
 
Joined: Jul 2006
Posts: 541
From: Franklin, MA
any chance of the license plate brackets that hold the lights up?

Thanks
Old Feb 12, 2008 | 01:49 PM
  #151  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by ajcool2
Do you have a 97-99 chrome grill?
Only an aftermarket one.

Originally Posted by Mr****s95SE
any updates on those O2 sensors? thanks.
Nothing yet.

Originally Posted by Blackmax1924
any chance of the license plate brackets that hold the lights up?

Thanks
Nope there all rusted
Old Feb 13, 2008 | 07:20 AM
  #152  
GLE96's Avatar
Junior Member
 
Joined: Feb 2008
Posts: 20
From: PA
I need a black driver side upper B-Pillar cover for a 96. It would have to accommodate the height adjustable seat belts. Shipped to 18018

e-mail me bigbucks_79@yahoo.com
Old Feb 13, 2008 | 07:23 AM
  #153  
desalphine's Avatar
Junior Member
iTrader: (1)
 
Joined: May 2005
Posts: 23
From: san diego
do you have 98 driver side mirror?
Old Feb 13, 2008 | 08:00 AM
  #154  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by GLE96
I need a black driver side upper B-Pillar cover for a 96. It would have to accommodate the height adjustable seat belts. Shipped to 18018

e-mail me bigbucks_79@yahoo.com
Email will be sent in a minute.

Originally Posted by desalphine
do you have 98 driver side mirror?
I do but will have to double check there condition. The three mounting bolts like to break off. If you can use your base then i have one for sure. Are you looking for heated or non heated? I have one of each both in black.
Old Feb 13, 2008 | 08:25 AM
  #155  
desalphine's Avatar
Junior Member
iTrader: (1)
 
Joined: May 2005
Posts: 23
From: san diego
I do but will have to double check there condition. The three mounting bolts like to break off. If you can use your base then i have one for sure. Are you looking for heated or non heated? I have one of each both in black.[/QUOTE]

base on my mirror is not good either, could you check if it is good. i am looking for power non-heated mirrors.
Old Feb 13, 2008 | 12:24 PM
  #156  
DomoMaxima98's Avatar
Senior Member
iTrader: (6)
 
Joined: Mar 2007
Posts: 940
From: MD/DC/VA
Drivers side ABS sensor? for a 98 max?
Old Feb 13, 2008 | 12:25 PM
  #157  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by DomoMaxima98
Drivers side ABS sensor? for a 98 max?
No fronts only rears.
Old Feb 13, 2008 | 12:37 PM
  #158  
bigpulve+'s Avatar
Supporting Maxima.org Member
iTrader: (11)
 
Joined: Apr 2006
Posts: 11,656
From: Vermont
stock Spring and struts for front and rear...I need the whole assembly...I am getting rid of my K sports.
Old Feb 13, 2008 | 12:47 PM
  #159  
Maxima_Joe's Avatar
Thread Starter
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by mazzivart
stock Spring and struts for front and rear...I need the whole assembly...I am getting rid of my K sports.
I do have an entire assembled set. shock/struts,springs and mounts. There from a manual se. $300 shipped
Old Feb 13, 2008 | 12:55 PM
  #160  
bigpulve+'s Avatar
Supporting Maxima.org Member
iTrader: (11)
 
Joined: Apr 2006
Posts: 11,656
From: Vermont
Originally Posted by fanaticrockford
I do have an entire assembled set. shock/struts,springs and mounts. There from a manual se. $300 shipped
Awesome. That will be good. It will still give a slight drop in my Auto...what year are they from?

Thread Tools
Search this Thread

All times are GMT -7. The time now is 09:38 AM.