FS/GI: Stillen V2 supercharger kit
#1
Thread Starter
Supporting Maxima.org Member
iTrader: (33)
Joined: Apr 2006
Posts: 533
From: Las Vegas
FS/GI: Stillen V2 supercharger kit
I got this not too long ago but I don't think I'll go through with the install. Here's the parts list of what I have, as complete as I could make it.
Vortech V2 supercharger (2 pullies, 3.33" and 3.6", both 6-rib)
Mounting plate with reinforced welds
Vortech BOV
Several pieces of intake pipes, couplers, clamps, and K&N air filter
Idler pulleys and other spare pulleys (?)
Stillen/Vortech FMU, an extra upgraded BEGI FMU, and mounting hardware
Oil drainback plate and SS braided oil feed line
Inline fuel pump and wiring
Alternator relocate bracket
A few 6-rib belts
Stillen CARB sticker and an extra CARB plate
Installation instructions
Misc. fuel lines and vaccuum hoses
Misc. hardware/bolts
All pictures are here: http://www.rafalr.com/forsale/stillen/
This is not off my own car, I bought it from someone who took it off their car. There are some upgraded parts in this kit, but some little things might be missing. One thing I know you'll need is the charge pipe (from supercharger to throttle body), but that can be made by any exhaust shop. I'm not 100% sure what all the little parts are, so your best bet is to take a look at the pictures. Everything shown in the pics will be included.
Looking to get $1800 shipped for it. If you're serious about getting it, PM me and maybe we can do a deposit type of deal. I've got good trader feedback on here, both from buying and selling, and I'm PayPal verified. If you're near Vegas, maybe we can meet somewhere to deliver.
EDIT: SOLD!!!
Vortech V2 supercharger (2 pullies, 3.33" and 3.6", both 6-rib)
Mounting plate with reinforced welds
Vortech BOV
Several pieces of intake pipes, couplers, clamps, and K&N air filter
Idler pulleys and other spare pulleys (?)
Stillen/Vortech FMU, an extra upgraded BEGI FMU, and mounting hardware
Oil drainback plate and SS braided oil feed line
Inline fuel pump and wiring
Alternator relocate bracket
A few 6-rib belts
Stillen CARB sticker and an extra CARB plate
Installation instructions
Misc. fuel lines and vaccuum hoses
Misc. hardware/bolts
All pictures are here: http://www.rafalr.com/forsale/stillen/
This is not off my own car, I bought it from someone who took it off their car. There are some upgraded parts in this kit, but some little things might be missing. One thing I know you'll need is the charge pipe (from supercharger to throttle body), but that can be made by any exhaust shop. I'm not 100% sure what all the little parts are, so your best bet is to take a look at the pictures. Everything shown in the pics will be included.
Looking to get $1800 shipped for it. If you're serious about getting it, PM me and maybe we can do a deposit type of deal. I've got good trader feedback on here, both from buying and selling, and I'm PayPal verified. If you're near Vegas, maybe we can meet somewhere to deliver.
EDIT: SOLD!!!
Last edited by fellfrosch7; 03-04-2008 at 11:50 AM.
#13
Thread Starter
Supporting Maxima.org Member
iTrader: (33)
Joined: Apr 2006
Posts: 533
From: Las Vegas
I thought it was implied from my previous post that this one is aluminum. The previous owner has a part of it reinforced with some extra welds to try to minimize flexing, you can see that in the pics.
#16
Thread Starter
Supporting Maxima.org Member
iTrader: (33)
Joined: Apr 2006
Posts: 533
From: Las Vegas
All PMs replied to.
It seems there are 4-5 interested people, so... money talks. Whoever can pay the whole amount in full gets it. PM me and I'll give you my PayPal info or however else you want to handle the payment.
It seems there are 4-5 interested people, so... money talks. Whoever can pay the whole amount in full gets it. PM me and I'll give you my PayPal info or however else you want to handle the payment.
#17
Thread
Thread Starter
Forum
Replies
Last Post
Pied
4th Generation Maxima (1995-1999)
0
09-26-2015 03:29 PM