4th Generation Classifieds (1995-1999) The highly sought after variable intake may be a click away.

WTB: rear left and rear right window regulator

Thread Tools
 
Search this Thread
 
Old May 24, 2008 | 04:49 PM
  #1  
cditto's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2002
Posts: 142
From: Broken Arrow, OK
WTB: rear left and rear right window regulator

Both motors are fine...just need the regulators.

Please let me know the following here first:

- year of car taken from (and mileage if you know)
- condition of regulator (especially the plastic that normally breaks on these things where the wires wrap back to the motor)
- price with shipping to 74014
- pics if possible

Thanks!

P.S. If you only have one or the other, let me know as well.
Old May 24, 2008 | 05:04 PM
  #2  
Maxima_Joe's Avatar
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
I have both of them from one of my cars. I think I still have one side from a 97 120K.
The other side would be from a 95-96
There all still installed in doors with no problems.
$40 shipped for both regulators
Old May 25, 2008 | 09:02 AM
  #3  
cditto's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2002
Posts: 142
From: Broken Arrow, OK
I'll take them both...thanks man.

They are with or without motor? I only ask because my regulators are broke and I can't seem to free the stupid screws that hold them to their motors. If you know a way to break them free without stripping them with a screwdriver (why those aren't 10mm bolts is beyond me), I'd really appreciate it.

Just PM me with payment details (I'm assuming paypal), and I'll pay you today and PM you back shipping address. Thanks again.

P.S. Only thing I'd ask for shipping is that you try if possible to protect the little plastic ends, since those are the things that always break on these things.

OH!!! and label for me which is rear left and which is rear right...I'm not that bright! Just sharpie right on em or something.
Old May 25, 2008 | 11:44 PM
  #4  
Maxima_Joe's Avatar
4th Gen Parts King
iTrader: (384)
 
Joined: May 2002
Posts: 7,759
From: Moorhead, MN
Originally Posted by cditto
I'll take them both...thanks man.

They are with or without motor? I only ask because my regulators are broke and I can't seem to free the stupid screws that hold them to their motors. If you know a way to break them free without stripping them with a screwdriver (why those aren't 10mm bolts is beyond me), I'd really appreciate it.

Just PM me with payment details (I'm assuming paypal), and I'll pay you today and PM you back shipping address. Thanks again.

P.S. Only thing I'd ask for shipping is that you try if possible to protect the little plastic ends, since those are the things that always break on these things.

OH!!! and label for me which is rear left and which is rear right...I'm not that bright! Just sharpie right on em or something.
Price is without motors but I can include them for another $10.
To get the screws out make sure you have the right size bit. If they won't loosen try tightening them and then loosening them. Sometimes that works. If not just use a vice grips on them.

I checked today and don't have the 97 one any longer. I do have them both from a 96 though. I will be able to pull them tomorrow to double check there condition.
Old May 26, 2008 | 04:37 PM
  #5  
cditto's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2002
Posts: 142
From: Broken Arrow, OK
Originally Posted by fanaticrockford
Price is without motors but I can include them for another $10.
To get the screws out make sure you have the right size bit. If they won't loosen try tightening them and then loosening them. Sometimes that works. If not just use a vice grips on them.

I checked today and don't have the 97 one any longer. I do have them both from a 96 though. I will be able to pull them tomorrow to double check there condition.
OK, sounds good. I'll take them without the motors if they are in ok to decent working condition.

Thanks again.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vingodine
5th Generation Classifieds (2000-2003)
45
May 21, 2016 12:46 PM
Huttig2009
5th Generation Classifieds (2000-2003)
8
Sep 25, 2015 03:31 PM
doctorpullit
8th Generation Maxima (2016-)
10
Aug 20, 2015 05:15 PM
Superbform
Audio and Electronics
1
Aug 11, 2015 08:10 PM
laparka66
7th Generation Maxima (2009-2015)
16
Aug 6, 2015 09:36 AM




All times are GMT -7. The time now is 07:02 PM.