As the title states, a lot of stock parts and aftermarket performance related (and some cosmetic) mods up for sale. These either were intended for my Maxima or came off it. The Maxima has been gone for 2 years but these parts have been in my basement for a while. Most of what I had sold and this is what remains (pics of all the items are in the posts following):

1. H3 HIDs 3000K (yellow/gold) brand new in box - $245

2. H3 upgraded wiring harness - $35
(takes higher wattage stock halogen H3 bulbs... a must if you are not going HID!)

3. MAF (mass air flow) sensor with adapter plate and Vibrant performance coupling (THICK walls and tight fit) - $65 (includes Vibrant coupling) - MAF with coupling SOLD - metal adapter plate available

4. "Accordion" intake connector hose with clamp - $10

5. IACV - $60

6. MEVI vacuum canister with built in check valve brand new - Best offer
- sorry missed taking a pic of this - let me know if you want to see it

7. MEVI vacuum solenoid brand new with wiring ready to splice in to - $20

8. Intake resonator - $10

9. Knock sensor - $50
(no way for me to test this but if I recall correctly it was working when I took it off the car)

10. OEM Nissan 95-96 glass passenger-side foglight in perfect, flawless condition with bulb - $100

11. OEM Nissan 95-96 passenger-side foglight bracket in perfect, flawless condition - $20

12. OEM Nissan 95-96 passenger-side foglight bracket with visible use but functionally fine - $15 - SOLD

13. OEM Nissan 95-96 driver-side foglight bracket with visible use but functionally fine - $15 - SOLD

14. OEM Nissan Driver-side side view mirror $50

15. OEM Nissan 95-96 passenger-side headlight with all brackets and adjusters intact and functional and no cracks or chips on glass surface - perfect condition, near new, never used - $75 - SOLD

16. OEM Nissan 95-96 driver-side headlight with all brackets and adjusters intact and functional and no cracks or chips on glass surface - perfect condition, near new, never used - $75 - SOLD

17. OEM Nissan 95-96 driver-side headlight with no cracks or chips on glass surface - rear bottom clip looks like it is popped out (see second pic) - $60

18. OEM Nissan 95-96 passenger-side headlight with all brackets and adjusters intact and functional but 1 crack on glass surface (see pics) - $60

19. Stock flywheel with associated install hardware - $75
(removed off my car when I upgraded my clutch to ACT and upgraded my flywheel to a lightweight)

20. SSR Type C rims (JDM version, winning gold colour, imported directly from Japan to my door) 16x7 11.0 lbs each with near brand new Falken FK-452 summer performance tires 225/50/16 - Make offer
(this pic was taken quite a while back when the rims came off the car and they have been stored since then - I can take a better pic upon request)

21. Factory Maxima grey floormats - new condition - $70
(this pic was taken quite a while back when I got rid of the car and they have been stored since then - I can take a better pic upon request)

22. M&H Racemaster drag slicks (8x26x15) mounted on 15x6 Mazda Millenia rims (weigh 11.0 lbs a piece) - $340
(pics available upon request)

23. Vibrant performance 3" heavy duty couplings (I believe I have 3 of these; pics available upon request) - $15 each

24. Stock pulley - $30

I have been off the Maxima scene for 2 years so the prices are what I thought would be fair based on searches of other threads with the same parts (the stock ones at least). Please PM or e-mail me at speeedemn@hotmail.com for pics or additional information.

Thanks for looking.

 

1. H3 HIDs 3000K (yellow/gold) brand new in box - $245




2. H3 upgraded wiring harness with fuse and relay - $35
(takes higher wattage stock halogen H3 bulbs... a must if you are not going HID!)

 

3. MAF (mass air flow) sensor with adapter place and Vibrant performance coupling (THICK walls and tight fit) - $65 (includes Vibrant coupling)




4. "Accordion" intake connector hose with clamp - Make an offer


5. IACV - $60


6. MEVI vacuum canister with built in check valve brand new - Best offer
- sorry missed taking a pic of this - let me know if you want to see it

 

7. MEVI vacuum solenoid brand new with wiring ready to splice in to - Best offer




8. Intake resonator - Best offer
(sorry I don't recall what this is called exactly - it has been off my car for ages)

 

9. Knock sensor - $50
(no way for me to test this but if I recall correctly it was working when I took it off the car)




10. OEM Nissan 95-96 glass passenger-side foglight in perfect, flawless condition with bulb - $100


11. OEM Nissan 95-96 passenger-side foglight bracket in perfect, flawless condition - $20


12. OEM Nissan 95-96 passenger-side foglight bracket with visible use but functionally fine - $15 - SOLD

 

13. OEM Nissan 95-96 driver-side foglight bracket with visible use but functionally fine - $15 - SOLD


14. OEM Nissan Driver-side side view mirror $50




15. OEM Nissan 95-96 passenger-side headlight with all brackets and adjusters intact and functional and no cracks or chips on glass surface - perfect condition, near new, never used - $75 - SOLD

 

16. OEM Nissan 95-96 driver-side headlight with all brackets and adjusters intact and functional and no cracks or chips on glass surface - perfect condition, near new, never used - $75 - SOLD




17. OEM Nissan 95-96 driver-side headlight with no cracks or chips on glass surface - rear bottom clip looks like it is popped out (see second pic) - $60

 

18. OEM Nissan 95-96 passenger-side headlight with all brackets and adjusters intact and functional but 1 crack on glass surface (see pics) - $60




19. Stock flywheel with associated install hardware - $75
(removed off my car when I upgraded my clutch to ACT and upgraded my flywheel to a lightweight)


20. SSR Type C rims (JDM version, winning gold colour, imported directly from Japan to my door) 16x7 11.0 lbs each with near brand new Falken FK-452 summer performance tires 225/50/16 - Make offer
(this pic was taken quite a while back when the rims came off the car and they have been stored since then - I can take a better pic upon request)

 

21. Factory Maxima grey floormats - new condition - $70
(this pic was taken quite a while back when I got rid of the car and they have been stored since then - I can take a better pic upon request)








22. M&H Racemaster drag slicks (8x26x15) mounted on 15x6 Mazda Millenia rims (weigh 11.0 lbs a piece) - $340
(pics available upon request)

23. Vibrant performance 3" heavy duty couplings (I believe I have 3 of these) - $15 each

 

24. Stock pulley - $30

 

pics of the path adapters

 

Pm'ed about fog brackets.

 

Hey call me! On the weekend, I was telling you I needed a passenger side headlight - silly bastard I'll take that from you. Trade for beer....

 

I believe that's the resonator.

 

Thanks!

 

Hey, is the MAF fully functional?

How much is shipping to 12158.

 

Doh I forgot to include the price of the coupling in the price of the MAF... my mistake... price corrected in the original posts but for you since it was my oversight, its my loss. I am getting shipping quote of $25.52 through UPS plus the MAF/coupling for $50 for a total of $75.52

 

Okay I'll keep that in mind.

I am trying to fix a problem and I have injectors coming. If that doesn't fix it, and you still have it available, I'll take it. Thank you.

 

location required. prices required.

 

Prices already indicated beside each item and location just added to my profile.

Thanks.

 

dude thats not a egr valve thats a iacv

 

I actually had it labelled as IACV initially but edited it to say EGR because of a gasket thread that I was reading through to try to remember. Wow what 2 years of unfamiliarity does - I was a pro, I swear! lol...

Thanks for clarifying - posts edited.

 

List updated

 

any stock good speakers

 

If he doesn't have speakers, I do. 99 SE non-bose ones.

(Don't mean to hi-jack your thread bro, I'm just subscribed due the MAF and figured I'd help the guy if you can't.)

 

Sorry, no speakers... car is already gone - I just have what is listed above.

Thanks.

 

are the mevi parts oem nissan?

 

Those 2 parts do not have a Nissan emblem stamped on them but they are off a MEVI kit the same as if you would purchase otherwise. They are not hackjob or spliced parts.

I hope that helps answer your question - you can see the exact part in the pics above.

In fact the reason I bought these parts is because they were better than what I had on my own MEVI kit that I had bought used but I never got a chance to swap them out.

 

Are you willing to sell the MAF adapter piece and a coupler to go with it? (3" I believe). This is shipped to 16803. I am having a hard time finding adapters anywhere that are a direct fit AND metal, not plastic I don't need the MAF, though.

 

Depending on how much that ^^^ lowers the price of the MAF I might pick it up for the hell of it.

 

I have 2 more couplings, brand new never used - I am giving him one of them. The coupling that is attached to the MAF is on as tight as a NASA vacuum chamber in outer space - so I would rather not try to pry it off if I don't have to.

I am taking off the metal adapter for him though... so I could reduce the price of the MAF a bit for that (along with the Vibrant 3" coupling). PM me with your zipcode if you are interested.

 

I'm at 12158.

PM'ing is a hassle lol. It's just easier to post here quickly.

 

List updated.

 

Merry Christmas and a Happy Holidays to all and a bump for those unfulfilled Christmas gift-receiving wishes...

 

how mutch AFM adapter plate metal shipped to 29170.pm to cesarkh@yahoo.com

 

glws!

 

Check your e-mail... I e-mailed you a couple of times.

 

List updated! Make offers on remaining items!

 

Do you want to sell just the drivers side mat? I don't need the rest. If so how much shipped to 80501?
Madmax8

 

I could theoretically sell just one mat, but I would have a hell of a time trying to sell 3 mats without a driver mat.

To be honest, the cost to you for 1 mat + shipping will be marginally less than 4 mats + shipping - might as well take the set and have a mint second set.