Finally got some pictures. The cams are still in the motor these are the pictures of the factory cams and springs. As you can tell from the pictures the motor did not have any oil in it when i bought it it was new.I got this from the Mr. Gasket company after the bought it from Nissan. They took it apart and speced everything out for gaskets them reassemble it and sold it. I got it cheap this is why I'm selling it cheap.I did change out the factory rod bolts for ARP bolts to rev up to 7200rpm. The only thing that was wrong with it was the front seal was not installed very well and it leaked oil more like poured oil out the front seal.I change it out but I did not clean the oil of the front of the motor yet as you can tell in the pictures. The Kinetix is sold.The motor and everything else listed is sold pending payment right now.I will let everyone know for sure if it is definitely sold within the next day or so. Sorry it to so long for the pics. The pathfinder throttlebody is not for sale yet but it will be later.

JWT ecu 7200 rpm cut = $350 shipped
S1 3.5 cams (knockoffs) has around 7000 miles on it=$275 shipped
3.5 HR springs and shims same miles as cams=$100 shipped
Kinetix intake =$375 shipped
I just pulled the motor out of the car so I'll get picks put up after this weekend.I'll also sell the 3.5(converted with the 3.0 timing equipment) with 7000 miles on it with a 350z intake with it for $500 plus frieght. You will not be able to shut your hood with this setup though. Sorry I don't have the factory intake manifold for the engine.

 

why would u not be able to close the hood and is there any way you can figure out how much shipping to 70471 would be?
-Dibs on motor, providing answer.....
-Jared

 

I'll check on the shipping Monday.This will have to be shipped on a pallet.I had a 3.0 motor shipped from Florida to my business for $150. I'll have to call the freight company. When I cut and welded the 350z intake I was just goofing off to see what the difference would be between the kinetix and it so I did not weld where the throttle body bolts on bent to fit under the hood. You can have it re welded to fit but I just ran it on the dyno and at the track without the hood then took it back off. I have a pathfinder throttle body with and adaptor for the 3.5 or kinetix that I will probably sale later.I have a lot of extra stuff that I'll be posting up with pics next week I just listed the bigger things for now.

 

check pm

 

How much shipped to 49508? Let me know. Pasok dont get this motor or i wont finish your lights lol.

 

OMGGG!!!! this thread is FULL of deals! BUMP for GREEAAAAT prices!

 

In for the motor if these 2 guys fall through. How many miles were on the 3.5 before the swap? How's it do as far as oil consumption? Are the cams already out of the motor?

Shipping to 94305?

 

pm sent on ecu

 

pm sent for cams

 

PM SENT!

 

Hey guys I'll try to get to everyone's PM.A soon as I posted this I had 12pm's in less than 10 minutes. I'll go buy who pmed me or post up that they are interested 1st.As of right now the whole setup is sold minus the kinetix pending payment sorry i don't get on here as much but I will respond to everyone's pm's as soon as I can. Thanks for the interest. I will still post picks off the motor and other parts after this weekend.

 

Oh damn good luck with sale... I know that ecu is already gone...
if not i hope its here next month

 

 

The cattman headers are already sold sorry I pasted the wrong pic

 

check your PM

 

i want the ecu pleaseeeee. lol but if it isnt sold or if deal falls through. dibzzzz

 

Thought the motor was sold? Is it not?

 

flywheel for sale?

 

how much for the shotgun...?
really though, you dont have the exhaust system?

 

Sorry guys everything sold within 20 minutes after posting.I was just waiting for payment before confirming with everyone.

 

I sold the fidenza flywheel with the motor in a package deal.

 

Damn when I read the thread title I going to come in and make a joke about buying your motor but you were actually selling. lol