FS in TN: OEM L & R front strut assy's, OEM front bumper lights
02-19-2009, 10:58 PM
#1
FS in TN: OEM L & R front strut assy's, OEM front bumper lights
...from my 97 SE with 120k miles.
Details on strut assembly's (100% OEM parts):
Driver front - Fully functional, nothing at all wrong with it.
Pass. front - You may want to replace the Upper Strut Mount - it produces a click/pop sound on bumps. other than that, fully functional...if you have a spring compressor and a spare strut mount, or $30 to get one, it will be good as new.
Reason for selling: I replaced my passenger side with a Monroe QuickStrut, which replaced everything from top to bottom, and while i was at it replaced the driver side.
(NOTE: I prefer to sell both assemblies as one unit...)
STRUT PICS:
OEM Tokico Struts - Pass. front:
You can see the upper strut mount on the Pass. front is holding the strut slightly off-center, this will be fixed with a new mount ($30ish?) but it IS STILL DRIVEABLE:
Dust boots (both sides) are tattered, not a big deal IMO...also a cheap fix, ($10ish?):
Upper strut mount on driver's side still in good shape:
Again, driver side front strut assembly is in great driving condition. Passenger side front strut assembly in OK driving condition...produces a "click" / "pop" sound over bumps and/or when braking, but if this concerns you, it's a cheap fix.
Asking price for struts:
Passenger side: $85 shipped
Driver side: $95 shipped
Details on front bumper lights (100% OEM):
All (4) pieces in great condition. Reason for selling: I replaced them with the clear ones, and don't plan to change them back any time soon.
(NOTE: I also prefer to sell all (4) pieces as one unit...)
Pics of bumper lights:
Asking price for bumper lights:
All (4) pieces: $30 shipped
make an offer (reasonable)!
Details on strut assembly's (100% OEM parts):
Driver front - Fully functional, nothing at all wrong with it.
Pass. front - You may want to replace the Upper Strut Mount - it produces a click/pop sound on bumps. other than that, fully functional...if you have a spring compressor and a spare strut mount, or $30 to get one, it will be good as new.
Reason for selling: I replaced my passenger side with a Monroe QuickStrut, which replaced everything from top to bottom, and while i was at it replaced the driver side.
(NOTE: I prefer to sell both assemblies as one unit...)
STRUT PICS:
OEM Tokico Struts - Pass. front:
You can see the upper strut mount on the Pass. front is holding the strut slightly off-center, this will be fixed with a new mount ($30ish?) but it IS STILL DRIVEABLE:
Dust boots (both sides) are tattered, not a big deal IMO...also a cheap fix, ($10ish?):
Upper strut mount on driver's side still in good shape:
Again, driver side front strut assembly is in great driving condition. Passenger side front strut assembly in OK driving condition...produces a "click" / "pop" sound over bumps and/or when braking, but if this concerns you, it's a cheap fix.
Asking price for struts:
Passenger side: $85 shipped
Driver side: $95 shipped
Details on front bumper lights (100% OEM):
All (4) pieces in great condition. Reason for selling: I replaced them with the clear ones, and don't plan to change them back any time soon.
(NOTE: I also prefer to sell all (4) pieces as one unit...)
Pics of bumper lights:
Asking price for bumper lights:
All (4) pieces: $30 shipped
make an offer (reasonable)!
Last edited by tyler5619; 03-27-2009 at 10:04 PM.
02-21-2009, 09:06 PM
#2
Send pricing and pics to max88q@yahoo.com for drivers side strut mount assembly please
Last edited by max95q; 02-22-2009 at 03:39 AM.
02-27-2009, 01:21 PM
#5
Send pricing and pics to max88q@yahoo.com for drivers side strut mount assembly please
bump lol
Thread
Thread Starter
Forum
Replies
Last Post
vingodine
5th Generation Classifieds (2000-2003)
45
05-21-2016 12:46 PM
MaxStock
5th Generation Classifieds (2000-2003)
0
08-14-2015 10:01 PM
Greenmaxspeed
4th Generation Classifieds (1995-1999)
0
08-08-2015 12:39 PM
laparka66
7th Generation Maxima (2009-2015)
16
08-06-2015 09:36 AM