FS: Want mods? S/C, NOS, and much more
04-28-2009, 10:37 PM
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (2)
Join Date: Apr 2003
Location: West Fargo, ND 58078
Posts: 349
FS: Want mods? S/C, NOS, and much more
Prices are listed without shipping charges unless noted. Smaller items under approx 5 pounds will be shipped on my dime otherwise PM for a shipping quote.
First come first serve! As in first paypal gets it. Parts are also listed in other venues besides the org.
Payments: Paypal is a scam! But I will take it. I'll eat the fees too.
<edit>I have changed some prices and moved the sold parts to the bottom</edit>
This was all for a 95 Maxima SE that I no longer have. So long org! You've been great!
SC has been sold
3.6” SC pulley, original pulley shipped with SC kit. ($25 shipped)
Complete custom-built direct-port NOS fogger system. Jetted for approx 80-100 hp. Comes with 10# NOS bottle w/ high flow adapter, fuel and nitrous solenoids, High flow SS braided nitrous line. The 6 stainless NOS fogger nozzles, distribution blocks, solenoids and SS lines are already plumbed and mounted on the 4th gen intake manifold that I will be including in the sale. You won’t have to bend a single hard line, weld/drill/tap the manifold or build brackets for the solenoids – just swap your manifold out with this one. It all fit under my stock hood without rubbing the insulation. I will include my relay and switches. Can also include my wireless steering wheel button setup if you want. <edit>will sell without nozzels so you can make it a single port fogger for $150 less</edit>($650 - make offer)
Snow Performance Stage II Boost Cooler Water/Methanol injection system. Includes jug, plumbing with quick connects, nozzle, high pressure pump and adjustable rising rate manifold pressure switch. Used it for maybe about 4 jugs worth of spraying. Never ran pump dry. Worked perfect every time. Pulled it out of the car once I found an unleaded race-gas wholesale supplier. ($150)
E-cutout (2.5" diameter) remote control exhaust bypass with 2-way rocker switch (only had it installed for a couple months) ($75)
Innovate LM-1 Wideband O2 Controller/gauge with sensor ($100 shipped)
Mechanical Nitrous pressure gauge ($20 shipped)
Autometer LED narrow band O2 Gauge ($40 shipped)
4 - 17” X 7” Eagle Alloy 6 spoke rims (40mm offset) with tires
http://forums.maxima.org/wheels-tire...-17-tires.html
Used VQ30DE motor that was never installed in my car. Was purchased from a distributor that also provided me with leak-down test pass paperwork from that motor. I still have the PDF so I can send it if you are interested. The block still has the heat-sensitive tab installed. I purchased it to replace the broken down motor but never got that far. (I paid $780, asking $300) JUNK - not for sale
A32 MAF ($45 shipped)
6-red top injectors (use for about 30K miles) ($60 shipped)
6 coil packs that all worked 100% ($90 shipped)
Genuine Nissan Starter that I purchased from the stealership, great condition, 20K miles on it at most ($40)
SOLD ITEMS
Clutch Net 6-puck sprung hub clutch with pressure plate. (4k miles) ($120) SOLD
Defi Mechanical Illuminated Boost gauge ($40 shipped) SOLD
V2 Stillen SC kit (Compressor with 10psi (3.1”) pulley, Mounting plate, Blitz BOV, charge plumbing, Oil return adapter, oil supply Tee and supply line, aux fuel pump, Vortech FMU, K/N Pancake filter, many bolts and other adapters/plates) I am the 2nd owner. 1st owner used for approx 5K miles. I used for another approx 5K miles. It has the original idler pulley that neither myself or the previous owner had any issues with. Never melted a pulley or threw a belt. Blower is in like new condition in terms of sound and performance. The main charge pipe was cut up by the previous owner to incorporate an intercooler. I had the charge pipe TIG'd back together so it is basically in its original configuration. Sadly, this kit has been sitting dormant for most of its life. I will include the Stillen manual and the old “Maxima V2 SC install for dummies” printout. ($1900) SOLD
Pics: http://fargo.craigslist.org/pts/1153450856.html
6 purple top injectors (purchased them used and they worked perfectly. Idled dead smooth) ($90 shipped) SOLD
5.5 Gen dual tip, variable flow muffler ($35) SOLD
2.87” SC pulley ($40 shipped) SOLD
NOS Bottle heater with wires, relay and illuminated rocker switch. ($30 shipped) SOLD
Complete KYG AGX adjustable suspension W/ Progress springs. About a 1.5” drop from stock. 20K miles on them. Great condition. ($160) SOLD
Walbro 255lph High pressure fuel pump ($45 shipped) SOLD
AEM Adj Fuel pressure regulator with 2 90 degree fittings, hoses, OEM FPR port adapter and plug ($60 shipped) SOLD
Unorthodox Underdrive crank pulley w/ belts, used for a couple thousand miles before I pulled it for the SC install ($50 shipped) SOLD
Budget Y pipe ($50) SOLD
2.5” High flow Cat ($30) SOLD
Budget B pipe with resonator and cutout (used to hit rear suspension so it was hacked up and rewelded, not pretty but it works great, I will have to cut it to get it out and mailed) ($50) SOLD
Single tip Magnaflow muffler (3K miles) ($50) SOLD
Defi Electronic Illuminated Fuel Pressure gauge ($50 shipped) SOLD
Greddy EGT Gauge with sensor probe and controller (it’s used but I have never hooked it up) ($40 shipped) SOLD
SAFC II ($100 shipped) SOLD
SS Braided brake lines for all 4 corners that I have never installed, brand new. ($40 shipped) SOLD
Brembo slotted and drilled brake rotors for all 4 corners ($40) SOLD
4 – 15” Saw Blade rims. SOLD
http://forums.maxima.org/wheels-tire...eap-cheap.html
2 – 15” steel wheels with Mickey Thompson E/T Drag Slicks installed with rim screws. Used on the track about 10 times. Never did a big burnout on account of having an open differential. They have always been stored in heavy gauge, air tight plastic bags when not in use. Still soft. ($50) SOLD
Z32 MAF with pigtail/harness ($80 shipped) SOLD
Fidanza aluminum flywheel with ring (4K miles) ($100) SOLD
5 speed transmission. 140K on it. Was rebuilt prior to any modding at exactly 100K miles. It drove quiet and shifted smooth right up to the end. Ran it with Amsoil synthetic, kept it all on the original and intact motor mounts to minimize stress to gears, never wheel-hopped, kept ball joints tight, tight CV joints, etc. ($300) SOLD
2 Axle shafts both had less than 5K each didn’t hear any noise from them (non abs) ($50) SOLD
Original (old school) JVC Chameleon CD/Radio head unit ($30) SOLD
First come first serve! As in first paypal gets it. Parts are also listed in other venues besides the org.
Payments: Paypal is a scam! But I will take it. I'll eat the fees too.
<edit>I have changed some prices and moved the sold parts to the bottom</edit>
This was all for a 95 Maxima SE that I no longer have. So long org! You've been great!
SC has been sold
3.6” SC pulley, original pulley shipped with SC kit. ($25 shipped)
Complete custom-built direct-port NOS fogger system. Jetted for approx 80-100 hp. Comes with 10# NOS bottle w/ high flow adapter, fuel and nitrous solenoids, High flow SS braided nitrous line. The 6 stainless NOS fogger nozzles, distribution blocks, solenoids and SS lines are already plumbed and mounted on the 4th gen intake manifold that I will be including in the sale. You won’t have to bend a single hard line, weld/drill/tap the manifold or build brackets for the solenoids – just swap your manifold out with this one. It all fit under my stock hood without rubbing the insulation. I will include my relay and switches. Can also include my wireless steering wheel button setup if you want. <edit>will sell without nozzels so you can make it a single port fogger for $150 less</edit>($650 - make offer)
Snow Performance Stage II Boost Cooler Water/Methanol injection system. Includes jug, plumbing with quick connects, nozzle, high pressure pump and adjustable rising rate manifold pressure switch. Used it for maybe about 4 jugs worth of spraying. Never ran pump dry. Worked perfect every time. Pulled it out of the car once I found an unleaded race-gas wholesale supplier. ($150)
E-cutout (2.5" diameter) remote control exhaust bypass with 2-way rocker switch (only had it installed for a couple months) ($75)
Innovate LM-1 Wideband O2 Controller/gauge with sensor ($100 shipped)
Mechanical Nitrous pressure gauge ($20 shipped)
Autometer LED narrow band O2 Gauge ($40 shipped)
4 - 17” X 7” Eagle Alloy 6 spoke rims (40mm offset) with tires
http://forums.maxima.org/wheels-tire...-17-tires.html
Used VQ30DE motor that was never installed in my car. Was purchased from a distributor that also provided me with leak-down test pass paperwork from that motor. I still have the PDF so I can send it if you are interested. The block still has the heat-sensitive tab installed. I purchased it to replace the broken down motor but never got that far. (I paid $780, asking $300) JUNK - not for sale
A32 MAF ($45 shipped)
6-red top injectors (use for about 30K miles) ($60 shipped)
6 coil packs that all worked 100% ($90 shipped)
Genuine Nissan Starter that I purchased from the stealership, great condition, 20K miles on it at most ($40)
SOLD ITEMS
Clutch Net 6-puck sprung hub clutch with pressure plate. (4k miles) ($120) SOLD
Defi Mechanical Illuminated Boost gauge ($40 shipped) SOLD
V2 Stillen SC kit (Compressor with 10psi (3.1”) pulley, Mounting plate, Blitz BOV, charge plumbing, Oil return adapter, oil supply Tee and supply line, aux fuel pump, Vortech FMU, K/N Pancake filter, many bolts and other adapters/plates) I am the 2nd owner. 1st owner used for approx 5K miles. I used for another approx 5K miles. It has the original idler pulley that neither myself or the previous owner had any issues with. Never melted a pulley or threw a belt. Blower is in like new condition in terms of sound and performance. The main charge pipe was cut up by the previous owner to incorporate an intercooler. I had the charge pipe TIG'd back together so it is basically in its original configuration. Sadly, this kit has been sitting dormant for most of its life. I will include the Stillen manual and the old “Maxima V2 SC install for dummies” printout. ($1900) SOLD
Pics: http://fargo.craigslist.org/pts/1153450856.html
6 purple top injectors (purchased them used and they worked perfectly. Idled dead smooth) ($90 shipped) SOLD
5.5 Gen dual tip, variable flow muffler ($35) SOLD
2.87” SC pulley ($40 shipped) SOLD
NOS Bottle heater with wires, relay and illuminated rocker switch. ($30 shipped) SOLD
Complete KYG AGX adjustable suspension W/ Progress springs. About a 1.5” drop from stock. 20K miles on them. Great condition. ($160) SOLD
Walbro 255lph High pressure fuel pump ($45 shipped) SOLD
AEM Adj Fuel pressure regulator with 2 90 degree fittings, hoses, OEM FPR port adapter and plug ($60 shipped) SOLD
Unorthodox Underdrive crank pulley w/ belts, used for a couple thousand miles before I pulled it for the SC install ($50 shipped) SOLD
Budget Y pipe ($50) SOLD
2.5” High flow Cat ($30) SOLD
Budget B pipe with resonator and cutout (used to hit rear suspension so it was hacked up and rewelded, not pretty but it works great, I will have to cut it to get it out and mailed) ($50) SOLD
Single tip Magnaflow muffler (3K miles) ($50) SOLD
Defi Electronic Illuminated Fuel Pressure gauge ($50 shipped) SOLD
Greddy EGT Gauge with sensor probe and controller (it’s used but I have never hooked it up) ($40 shipped) SOLD
SAFC II ($100 shipped) SOLD
SS Braided brake lines for all 4 corners that I have never installed, brand new. ($40 shipped) SOLD
Brembo slotted and drilled brake rotors for all 4 corners ($40) SOLD
4 – 15” Saw Blade rims. SOLD
http://forums.maxima.org/wheels-tire...eap-cheap.html
2 – 15” steel wheels with Mickey Thompson E/T Drag Slicks installed with rim screws. Used on the track about 10 times. Never did a big burnout on account of having an open differential. They have always been stored in heavy gauge, air tight plastic bags when not in use. Still soft. ($50) SOLD
Z32 MAF with pigtail/harness ($80 shipped) SOLD
Fidanza aluminum flywheel with ring (4K miles) ($100) SOLD
5 speed transmission. 140K on it. Was rebuilt prior to any modding at exactly 100K miles. It drove quiet and shifted smooth right up to the end. Ran it with Amsoil synthetic, kept it all on the original and intact motor mounts to minimize stress to gears, never wheel-hopped, kept ball joints tight, tight CV joints, etc. ($300) SOLD
2 Axle shafts both had less than 5K each didn’t hear any noise from them (non abs) ($50) SOLD
Original (old school) JVC Chameleon CD/Radio head unit ($30) SOLD
Last edited by sleepermaxima; 06-17-2009 at 12:07 PM.
04-28-2009, 11:03 PM
#3
Supporting Maxima.org Member
Thread Starter
iTrader: (2)
Join Date: Apr 2003
Location: West Fargo, ND 58078
Posts: 349
All wires are included. Used for about a year, give or take a few months.
Last edited by sleepermaxima; 05-03-2009 at 04:58 PM. Reason: removing pic to make room for other pics
04-29-2009, 06:04 AM
#6
Can you post pictures of "E-cutout remote control exhaust bypass with 2-way rocker switch (only had it installed for a couple months) ($75)" and how much shipped to 11229?
04-29-2009, 07:13 AM
#9
04-29-2009, 07:24 AM
#10
Supporting Maxima.org Member
Thread Starter
iTrader: (2)
Join Date: Apr 2003
Location: West Fargo, ND 58078
Posts: 349
DMH Performance makes it.
Example when new: http://www.superstang.com/powered_exhaust.htm
It worked perfectly when I used it. Didn't hear any leaking when it was closed.
My version is dirty, that's about it. It does not come with a 'Y' adapter. That went out the door with the b-pipe already. (I'll still get the pics for you later)
Example when new: http://www.superstang.com/powered_exhaust.htm
It worked perfectly when I used it. Didn't hear any leaking when it was closed.
My version is dirty, that's about it. It does not come with a 'Y' adapter. That went out the door with the b-pipe already. (I'll still get the pics for you later)
04-30-2009, 07:26 AM
#23
Supporting Maxima.org Member
Thread Starter
iTrader: (2)
Join Date: Apr 2003
Location: West Fargo, ND 58078
Posts: 349
I have never used it. It was used by the guy that owned it last. It was the pulley installed on the kit when I bought it. There is no evidence of slippage on the grooves. I can post pics later tonight.
05-01-2009, 02:17 PM
#30
Supporting Maxima.org Member
Thread Starter
iTrader: (2)
Join Date: Apr 2003
Location: West Fargo, ND 58078
Posts: 349
a sale fell through...
Due to a previous sale not completing the following items are back on the open market:
NOS Bottle heater
New SS Brake Lines
Greddy EGT Kit
read the original post for the details/price of each item
NOS Bottle heater
New SS Brake Lines
Greddy EGT Kit
read the original post for the details/price of each item
05-02-2009, 07:55 PM
#38
Supporting Maxima.org Member
Thread Starter
iTrader: (2)
Join Date: Apr 2003
Location: West Fargo, ND 58078
Posts: 349
"For free air it should show 20.9%. If the display value is different by more than 0.6%, recalibrate. You can test the oxygen sensor by breathing on it. The oxygen content of your breath will show."
The unit dispayed 20.6 to 20.9.
Last edited by sleepermaxima; 05-03-2009 at 11:23 AM. Reason: Adding pics, adjusted range that I saw