FS- CATTMAN HEADERS (1ST GEN/HIGH TEMP COATED)
05-12-2009, 04:11 PM
#1
FS- CATTMAN HEADERS (1ST GEN/HIGH TEMP COATED)
UP ON EBAY!!!!!!
http://cgi.ebay.com/ebaymotors/ws/eB...m=260470664538
Hey guys
I have a set of Cattman first gen headers that have been sand blasted and high temp coated flat black with por 15, which is guaranteed not to chip or flake like other crappy header paint.
info..
http://www.por15.com/BLACK-VELVET/productinfo/BVG/
They look amazing but the downside is I dont have the y pipe. I had it at my shop but sum dumba$$ threw it out believe it or not but I can only blame it on myself for leaving it around.
Anyway, these headers themselves are GREAT for a true dual exhaust setup or a custom turbo setup. You can even probably get the rest of the pipe made at an exhaust shop if u want. The rear header also has the erg hookup so you dont have to sacrifice emissions for performance...
check out the pics!
**** I was told the 1st gen headers flow better than the 2nd and 3rd gen's***
almost $900 new...
looking for $300 shipped will take offers
pm me for questions
-Nick
http://cgi.ebay.com/ebaymotors/ws/eB...m=260470664538
Hey guys
I have a set of Cattman first gen headers that have been sand blasted and high temp coated flat black with por 15, which is guaranteed not to chip or flake like other crappy header paint.
info..
http://www.por15.com/BLACK-VELVET/productinfo/BVG/
They look amazing but the downside is I dont have the y pipe. I had it at my shop but sum dumba$$ threw it out believe it or not but I can only blame it on myself for leaving it around.
Anyway, these headers themselves are GREAT for a true dual exhaust setup or a custom turbo setup. You can even probably get the rest of the pipe made at an exhaust shop if u want. The rear header also has the erg hookup so you dont have to sacrifice emissions for performance...
check out the pics!
**** I was told the 1st gen headers flow better than the 2nd and 3rd gen's***
almost $900 new...
looking for $300 shipped will take offers
pm me for questions
-Nick
Last edited by happy4444; 08-31-2009 at 04:34 PM.
05-12-2009, 05:11 PM
#2
Senior Member
Join Date: Feb 2006
Posts: 137
Hey guys
I have a set of Cattman first gen headers that have been sand blasted and high temp coated flat black with por 15, which is guaranteed not to chip or flake like other crappy header paint.
info..
http://www.por15.com/BLACK-VELVET/productinfo/BVG/
They look amazing but the downside is I dont have the y pipe. I had it at my shop but sum dumba$$ threw it out believe it or not but I can only blame it on myself for leaving it around.
Anyway, these headers themselves are GREAT for a true dual exhaust setup or a custom turbo setup. You can even probably get the rest of the pipe made at an exhaust shop if u want. The rear header also has the erg hookup so you dont have to sacrifice emissions for performance...
check out the pics!
**** I was told the 1st gen headers flow better than the 2nd and 3rd gen's***
almost $900 new...
looking for $340 shipped
pm me for questions
-Nick
I have a set of Cattman first gen headers that have been sand blasted and high temp coated flat black with por 15, which is guaranteed not to chip or flake like other crappy header paint.
info..
http://www.por15.com/BLACK-VELVET/productinfo/BVG/
They look amazing but the downside is I dont have the y pipe. I had it at my shop but sum dumba$$ threw it out believe it or not but I can only blame it on myself for leaving it around.
Anyway, these headers themselves are GREAT for a true dual exhaust setup or a custom turbo setup. You can even probably get the rest of the pipe made at an exhaust shop if u want. The rear header also has the erg hookup so you dont have to sacrifice emissions for performance...
check out the pics!
**** I was told the 1st gen headers flow better than the 2nd and 3rd gen's***
almost $900 new...
looking for $340 shipped
pm me for questions
-Nick
Will it fit a 2003 maxima, and where can i pick up a y pipe.
Thanks.
05-12-2009, 05:29 PM
#3
05-12-2009, 08:22 PM
#4
brian catts. i spent a few hours on the phone with him last summer and he mentioned that the newest gen (i dont know what # theyre on now) flows the best (obviously lol). the first gen headers were made in new zealand and im pretty sure the second batch was as well. but from what i recall, he did say the first gen headers flowed better and produced a little more power than the next few batches believe it or not.
...dont shoot the messenger lol
these were originally on a 02. was the egr different as to why it wont fit an 03?
...dont shoot the messenger lol
these were originally on a 02. was the egr different as to why it wont fit an 03?
Last edited by happy4444; 05-12-2009 at 09:13 PM.
06-05-2009, 10:37 AM
#12
if i was selling only the y pipe for these headers it would be useless without the headers, but with just the headers and no y pipe like im currently selling, someone can still put the headers themselves to good use.
i cant believe no one wants to run tru duals by doing a little welding. i guess im the only one with side pipes on a 3.5 maxima
07-22-2009, 06:10 PM
#21
brian catts. i spent a few hours on the phone with him last summer and he mentioned that the newest gen (i dont know what # theyre on now) flows the best (obviously lol). the first gen headers were made in new zealand and im pretty sure the second batch was as well. but from what i recall, he did say the first gen headers flowed better and produced a little more power than the next few batches believe it or not.
...dont shoot the messenger lol
these were originally on a 02. was the egr different as to why it wont fit an 03?
...dont shoot the messenger lol
these were originally on a 02. was the egr different as to why it wont fit an 03?
03's are 3.5's
07-22-2009, 07:47 PM
#23
08-31-2009, 04:34 PM
#26
08-31-2009, 09:24 PM
#29
If you are referring to my question, I was referring to the unique specialized ypipe that is needed to go along with these headers. Usually sold as a kit, but I was wondering if it was sold separately.
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM