SOOOO MANY MAXIMA PARTS + 4g 5-speed partout, Vortech V1 SC!

Subscribe
Jul 1, 2009 | 01:03 PM
  #1  
I would prefer that all inquires be directed to MaximaParts@Hotmail.com Please put the name of the part in the subject line. I have set up this account just for my maxima parts sales, I will try to stay on top of this thread and PM's, but for fastest response please e-mail all inquires. I can also be reached at 774-766-7462 or VQ35deswap on AIM. Prices do not include shipping, please include your zip-code in e-mail. Thanks for looking

Items will be shipped on Tuesdays & Thursdays.

ENTIRE 5-speed conversion package: $1099, includes good low mileage open-dif transmission, all shifter parts like rods, trim etc, flywheel, timing ring, clutch bolts, pedals, master & slave cylinder. SOLD

Vortech V1 with many extras, 100% complete ready to bolt on, solid set-up w/many many new parts, I'll even include the 3-core Mushimoto radiator! Dyno #'s in my sig are from this supercharger. 1-month warranty or 3-month warranty if installed @ my shop in Massachusetts: $2,750 FIRM, Installed: $3,299 SOLD

VIDEO OF SUPERCHARGER

NX wet n20 kit, includes zex purge, remote digital pressure gauge, and more: $599

'00vi: $299, includes upper/lower, injector's/rail, egr block, & new nissan gaskets

5-speed open dif transmission, needs bearings: $225 (Rebuild available, contact for pricing)

6-speed transmission, 20k miles, unknown condition but appears to be excellent: $575

Starters, tested & ready to go: $40

97+ headlights, nice: $50/set or $30/ea Pending usps money order payment.

Brand new Nissan knock sensor out of box special: $65

4g coils: $15/ea or $60/set

5.5g+ coils: $22/ea or $90/set

Sensors: $25

2 sets of 6 new Nissan spark plugs for 3.0: $40 or $35 for no box set

6 new NGK platinum plugs: $20 SOLD

Splash shields: $20/ea

New nissan TOB, no box: $28

5-speed shifter rods w/shifter assembly: $60

Clutch lines (not complete, 2 sets) $35

Brand new 3.0 timing chain tensioner & guide: $60

Axles (Many more not pictured): $40

Black leather interior, 8/10: $370

Installs available on any of the above mentioned parts.







Reply
Jul 1, 2009 | 01:04 PM
  #2  






Reply
Jul 1, 2009 | 01:06 PM
  #3  






Reply
Jul 1, 2009 | 01:10 PM
  #4  






Reply
Jul 1, 2009 | 01:11 PM
  #5  


Reply
Jul 1, 2009 | 01:42 PM
  #6  
i would love some plastic underguard, i need the passenger side piece that goes under the wheel well, got it?
Reply
Jul 1, 2009 | 01:57 PM
  #7  
Quote: i would love some plastic underguard, i need the passenger side piece that goes under the wheel well, got it?
Unfortunatly I don't have any of the fenderwell ones, sorry.
Reply
Jul 1, 2009 | 06:15 PM
  #8  
WOW....subscribed.
Reply
Jul 1, 2009 | 07:10 PM
  #9  
wow that is alot of parts, maybe i'll swing up there and see if theres anything i like
Reply
Jul 2, 2009 | 07:50 AM
  #10  
Ah, the Maxima carnage.

Great price on the 5MT swap.

Got any DE-K rear VCs?
Reply
Jul 2, 2009 | 04:28 PM
  #11  
Quote: Ah, the Maxima carnage.

Great price on the 5MT swap.

Got any DE-K rear VCs?

Unfortunatly I don't, just 2 00VI's, one for $299 missing tb, vc, and coils, and one that is very very complete for $399 including vias clean & fix + swirl valve elimination.
Reply
Jul 2, 2009 | 07:51 PM
  #12  
How much for the swap shipped to NY 11234 zip.....you take payment lay-a-way??
Reply
Jul 2, 2009 | 08:07 PM
  #13  
Thanx for the NGK plats. I gotta get the Bosch plugs outta there ASAP.
Reply
Jul 2, 2009 | 08:10 PM
  #14  
never seen so many starters together.
Reply
Jul 2, 2009 | 11:16 PM
  #15  
actually, do you have a front passenger side control arm mines all rusted to sh**, and the a/c line that runs along the firewall its the skinny one, some how that got a huge slash in it.
Reply
Jul 3, 2009 | 02:46 AM
  #16  
Quote: actually, do you have a front passenger side control arm mines all rusted to sh**, and the a/c line that runs along the firewall its the skinny one, some how that got a huge slash in it.
I do beleive I have a high side a/c line for a 97+, but I need to double check. no control arm though.
Reply
Jul 3, 2009 | 02:49 AM
  #17  
Quote: actually, do you have a front passenger side control arm mines all rusted to sh**, and the a/c line that runs along the firewall its the skinny one, some how that got a huge slash in it.
I do beleive I have a 97+ high side a/c line, but let me double check. No control arm though.
Reply
Jul 3, 2009 | 05:29 AM
  #18  
Quote: How much for the swap shipped to NY 11234 zip.....you take payment lay-a-way??
$100 & I'll deliver it myself, forgot to mention 24/7 tech support is included with that if you do it yourself, I've done a few 5-speed swaps.

if you paid for it in full I would have no problem holding it for however long you wanted it if that's what you mean. If you wanted to make payments I could also do that as well, I would like a $350 deposit up front and then $200/month until you paid off the rest if that's what you meant.
Reply
Jul 3, 2009 | 07:40 AM
  #19  
Do you have full shift linkage avail? Will it fit 5th gen?
Reply
Jul 3, 2009 | 07:46 AM
  #20  
Also how much for Rear Main Seal? Should fit 5th gen right?
Reply
Jul 3, 2009 | 08:55 AM
  #21  
Quote: Also how much for Rear Main Seal? Should fit 5th gen right?
Yes, it covers all 95-09's $34.99 SHIPPED. Paypal is Kevgoods@hotmail.com
Reply
Jul 3, 2009 | 08:56 AM
  #22  
Quote: Do you have full shift linkage avail? Will it fit 5th gen?
I do but it won't fit a 5th gen 5-speed trans, the linkages are dependent of what gen trans you have, so using a 4th gen linkage on a 5th gen trans WILL work BUT it will move the loaction of the shifter forwards or backwards, I can't remember, but it has been done before maybe see what you can find searching.
Reply
Jul 3, 2009 | 11:58 AM
  #23  
just curious, what does a 5speed swap install cost look like?
Reply
Jul 3, 2009 | 12:03 PM
  #24  
Installed, if you supply a new clutch and fluid, $1,750 and I'll cover anything else, includes ecu install as well but I might have to scoop one up from the junkyard near me (Which has alot of 5-speeds & hooks me up) depending on year of your car.
Reply
Jul 3, 2009 | 09:29 PM
  #25  
how much for the axles,for a 98(SE)auto?Shipped to 10454.Both please
Reply
Jul 4, 2009 | 07:37 AM
  #26  
bump
Reply
Jul 4, 2009 | 10:46 AM
  #27  
Quote: how much for the axles,for a 98(SE)auto?Shipped to 10454.Both please
Not all SE's had abs, does your car have abs? Because if so I'd want a little more for swapping the sensor ring over from a different axle (vlsd axles, I have like 3 of them, lol)
Reply
Jul 5, 2009 | 07:00 PM
  #28  
When you mean 60 a set on the 4th gen coilpacks, does that mean all six or just three? Also is that price including shipping? And whats the mileage and conditions on them? Interested if they are still good. Let me know or PM me.
Reply
Jul 5, 2009 | 07:21 PM
  #29  
Do you have a black center console? If so, how much shipped to 80122 and pics?

Thanks!
Reply
Jul 5, 2009 | 07:27 PM
  #30  
Can you give me a price on a perfectly working 5 speed 00-01 open diff tranny?
Reply
Jul 6, 2009 | 02:37 AM
  #31  
where is the 6-speed from? the 5th gen? will it fit a fourth gen?
Reply
Jul 6, 2009 | 04:14 AM
  #32  
I don't have a 5-th gen transmission, but I do have the 4th gen linkages to make it work perfect on a 5th gen.

Rebuilt, the transmission will be $799, turnaround is 2-weeks after receiving 50% deposit. Includes new seals, shimmed, and 6-month warranty.
Reply
Jul 6, 2009 | 04:15 AM
  #33  
Quote: where is the 6-speed from? the 5th gen? will it fit a fourth gen?
I bought it from another .org member but never obtained any of the other parts needed to put it in a 4G
Reply
Jul 6, 2009 | 04:19 AM
  #34  
Quote: Do you have a black center console? If so, how much shipped to 80122 and pics?

Thanks!
It's 95-96 style, and it's in good shape, I took it out of my car to put in a 97+ type w/real cupholders. If you are still interested I can clean of the 1-years worth of garage dust from it. $65 shipped to Littleton, co
Reply
Jul 6, 2009 | 07:16 AM
  #35  
Ok, thanks, I'm looking for a 97+ style so I think I will pass on this.
Reply
Jul 6, 2009 | 09:18 AM
  #36  
Quote: Ok, thanks, I'm looking for a 97+ style so I think I will pass on this.
If you're still looking in a week I may have one.
Reply
Jul 6, 2009 | 09:55 AM
  #37  
Quote: where is the 6-speed from? the 5th gen? will it fit a fourth gen?
http://forums.maxima.org/all-motor/3...edure-faq.html
Reply
Jul 7, 2009 | 12:52 AM
  #38  
Yeah that sounds really expensive, but now i know it could be done. Im looking for a quick, way to fix my LEAKING tranny and cluch.
Reply
Jul 7, 2009 | 08:21 PM
  #39  
Quote: .
Email sent.

Thanks
Reply
Jul 11, 2009 | 04:16 AM
  #40  
TTT
Reply