4th Generation Classifieds (1995-1999) The highly sought after variable intake may be a click away.

FS: six 4th Gen Maximas to Part out

Thread Tools
 
Search this Thread
 
Old 01-02-2010 | 08:17 AM
  #161  
99maxi's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (2)
 
Joined: Nov 2001
Posts: 654
From: NYC
Originally Posted by jgcable
I am looking for a white gauge cluster for a 1997
I am in Connecticut
SE guage clusters are gone.
Old 01-02-2010 | 08:18 AM
  #162  
99maxi's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (2)
 
Joined: Nov 2001
Posts: 654
From: NYC
Originally Posted by Camfantasy
have any tan center vents in good condition?
Are you still looking for the center vent? It will be $25 shipped with hazard and defrost buttons.
Old 01-03-2010 | 07:10 PM
  #163  
valveguy's Avatar
Junior Member
iTrader: (1)
 
Joined: Nov 2008
Posts: 43
From: Illinois
Looking for a couple of black 4th Gen interior trim pieces. I need the front pass side door lever trim piece. Also need the door handle (plastic "cup") trim piece for both front doors.

Last edited by valveguy; 01-03-2010 at 07:13 PM.
Old 01-03-2010 | 08:03 PM
  #164  
sleepymax's Avatar
Member
iTrader: (3)
 
Joined: Feb 2006
Posts: 180
From: Bronx,NY
hey,u have a 98 or betta SE stock suspension?Steering rack from a 99 and washer motor.Need the suspension to be in good condition,to atleast give anoda year or more.
Old 01-04-2010 | 08:03 PM
  #165  
JeffesonM's Avatar
living out of a maxima...
iTrader: (5)
 
Joined: Sep 2000
Posts: 2,432
From: NJ
I'm looking for calipers/rotors from an ABS equipped 4th gen... do you have any available? I could come to NY some Sunday to help with removal.
Old 01-04-2010 | 08:28 PM
  #166  
Babyblues's Avatar
Newbie - Just Registered
 
Joined: Jan 2010
Posts: 4
From: Missouri
Do you have any manual transmissions?
Old 01-05-2010 | 04:21 PM
  #167  
TurTLe*'s Avatar
Senior Member
iTrader: (11)
 
Joined: Feb 2005
Posts: 1,982
From: Chicago
let me know how much you want for 3 front injectors shipped. I need one buy since you have so many cars it might be hard to remember which are good and which are not.

60630
Old 01-17-2010 | 09:57 PM
  #168  
98maxgesus's Avatar
Newbie - Just Registered
 
Joined: Dec 2009
Posts: 13
From: staten island
how are the trannys in the car's im in si also.
Old 01-18-2010 | 12:24 AM
  #169  
carcrazyM01's Avatar
Junior Member
 
Joined: Jun 2009
Posts: 52
From: Baltimore, MD
how much for the rear passenger door on the green max?
Old 01-19-2010 | 02:43 AM
  #170  
th0ught's Avatar
Senior Member
iTrader: (7)
 
Joined: Apr 2006
Posts: 213
From: Bay Area
How much would you be looking for the snorkel-airbox-intake assembly?
Old 01-19-2010 | 03:38 PM
  #171  
Matangz's Avatar
Newbie - Just Registered
 
Joined: Dec 2009
Posts: 11
I need a seat belt for the driver side off of the 99 GLE. How much would it be shipped to zip code 48917? Thanks.
Old 01-20-2010 | 09:25 PM
  #172  
Burt's Avatar
Member
 
Joined: Jan 2010
Posts: 31
I need an evap charcoal canister for a 96 california spec maxima. if you've got one what would be the price shipped to 92243.
Old 01-21-2010 | 03:11 PM
  #173  
Yankel.v's Avatar
Junior Member
 
Joined: May 2008
Posts: 86
Hey, wondering, have you got any clear bumper turn lights.
I need one left inner, but let me know what do you have and I'll consider it.
10952
Thanks
Old 01-21-2010 | 07:41 PM
  #174  
Bonka's Avatar
Schnell kaputt
iTrader: (13)
 
Joined: May 2003
Posts: 1,559
From: Vancouver, BC
Do you have the center armrest latch mechanism and the 2 screws? It locks the armrest to the center console. Must be from a '95-96, thanks.
Old 03-26-2010 | 12:56 PM
  #175  
SCOTT300Z's Avatar
Newbie - Just Registered
 
Joined: Mar 2010
Posts: 1
I need and instrument cluster? Do you have one and if so how many miles and price. pm me plz thanks
Old 03-27-2010 | 03:37 AM
  #176  
sergofast's Avatar
Supporting Maxima.org Member
iTrader: (22)
 
Joined: Jul 2005
Posts: 985
From: Ashburn, VA
pm sent about the spoiler.....i know we spoke a month or so back, i never got an email w ur pic...i know ur busy man, but dont forget me please.
Old 03-28-2010 | 02:34 PM
  #177  
vegasvandal's Avatar
Newbie - Just Registered
 
Joined: Mar 2010
Posts: 3
I need a crank pulley for a 98. Got one?
Old 03-29-2010 | 12:56 PM
  #178  
Justaguy's Avatar
Member
 
Joined: Jun 2005
Posts: 294
From: Montreal
Do you have a non-bose factory radio with speakers?
A rear catalys converter?

Thanks
Old 03-29-2010 | 07:10 PM
  #179  
theamityvilletoaster's Avatar
Newbie - Just Registered
 
Joined: Mar 2010
Posts: 2
I'm looking for a black E-brake boot that's intact and the seat heater switches (someone took out the rocker part of mine and left the rest of it just laying there lol). Shipped to 04037.
Old 03-30-2010 | 12:30 AM
  #180  
youngnola3's Avatar
Newbie - Just Registered
 
Joined: Jul 2008
Posts: 7
hey how much do u want for the leather seats in either car
Old 03-31-2010 | 11:02 AM
  #181  
vinny0215's Avatar
Junior Member
 
Joined: Feb 2010
Posts: 24
96 leathers

how much for the 96 gle black leathers shipped too 01056 pm me
Old 03-31-2010 | 11:36 AM
  #182  
b_roadkid718's Avatar
Junior Member
 
Joined: Feb 2007
Posts: 66
From: NYC
parts

im looking for the EVAP purge valve off a 97+
PM me
Thnx
Old 03-31-2010 | 12:44 PM
  #183  
gsxr-rider137's Avatar
Member
 
Joined: Jul 2006
Posts: 151
From: Connecticut
looking for a 5 speed manual transmission for a 97 se. preferably a locking diff..which i was told is in the car. am located in connecticut. how far are you from ct?
Old 03-31-2010 | 02:25 PM
  #184  
Burt's Avatar
Member
 
Joined: Jan 2010
Posts: 31
If you've got a fuel pressure regulator left, how much shipped to 92243. Thanks
Old 03-31-2010 | 09:51 PM
  #185  
K31J1m0N's Avatar
Member
 
Joined: Nov 2009
Posts: 205
From: PA
how much for the coil packs to 19094
Old 04-04-2010 | 08:51 AM
  #186  
rickylabracio's Avatar
Member
iTrader: (2)
 
Joined: Apr 2010
Posts: 35
From: New Jersey
Pm'd you for the gauge cluster.
Old 04-06-2010 | 06:20 AM
  #187  
slfalco's Avatar
Member
 
Joined: Nov 2002
Posts: 237
From: Hyde Park, NY
Gold fenders for 99 SE

Looking for gold (sunlit sand EV0) fenders (both) for 99 SE, no dents/rust holes.. can you help? I am in Hyde Park NY so I could pick them up if needed...
Old 04-21-2010 | 04:36 AM
  #188  
garyhigh's Avatar
 
Joined: Oct 2005
Posts: 19
Part Needed

Hello 99maxi,

I need front and rear strut assemblies (complete with springs and mounts) for my 96 maxima. Can you help me out? If so how much for all 4 shipped to 29669?

Thanks!
Old 04-21-2010 | 10:21 AM
  #189  
xadxam's Avatar
Newbie - Just Registered
 
Joined: Sep 2005
Posts: 1
Hi,

I'm interested in the two metal coolant pipes in front of the engine if it's in good condition and no rust. It's part #14053M and #14053MA at the courtesynissan site here. PM your price and shipping to 10012. I can probably come pick it up in Brooklyn too.

Thanks!
Old 04-21-2010 | 11:36 AM
  #190  
bgawad's Avatar
Senior Member
iTrader: (8)
 
Joined: Nov 2009
Posts: 406
heyyy im really intrested in the 01 i30 engine cover. Please pm me asap. Thanks!
Old 04-22-2010 | 08:48 AM
  #191  
Russ1914's Avatar
Supporting Maxima.org Member
 
Joined: Mar 2003
Posts: 10
Looking for Tan Cloth head rests and Fog Lights. If Available, please let me know.
Old 04-25-2010 | 08:45 AM
  #192  
95maxrider's Avatar
Lightly modded
iTrader: (32)
 
Joined: Nov 2001
Posts: 7,735
From: Herndon, VA
I'm looking for a 97-99 MT shifter and drivers side fender well from an I30...let me know if you can get either, thanks!
Old 04-25-2010 | 02:59 PM
  #193  
Studio718's Avatar
Senior Member
iTrader: (2)
 
Joined: Mar 2005
Posts: 541
From: 11435
I'm looking for a shell, pm or e-mail me.

prefer 97-99, has to be a clean title.
Old 04-25-2010 | 11:57 PM
  #194  
spencerleeb's Avatar
Member
 
Joined: Apr 2010
Posts: 34
From: Minnesota
Do you have a 5 speed shift **** for a SE?

Please let me know, I can't find OEM ones anywhere
Old 04-26-2010 | 06:41 AM
  #195  
Dondon321's Avatar
Member
 
Joined: Apr 2010
Posts: 157
From: Bordentown, New Jersey
no more fog lights?
Old 04-26-2010 | 06:37 PM
  #196  
SrgScott's Avatar
Senior Member
iTrader: (2)
 
Joined: Feb 2009
Posts: 458
From: Oklahoma City, OKlahoma
Looking for an A/C compressor in good working order with no noise. Price shipped to 73099?
Old 05-19-2010 | 08:26 PM
  #197  
maximaboy12's Avatar
Senior Member
iTrader: (7)
 
Joined: May 2009
Posts: 419
From: Charlotte,NC
Hi, Im gonna need the door panel thing idk what they are called...heres a link

http://www.automobile.com/images/sto...13c9071d13.jpg

They are the plush things right above the window switches.
If you have one I need it in tan drivers side Mines ripped . How much Shipped to 28105?
And also if you have the hood shocks that keep it raised how much are those shipped to 28105?
Old 05-19-2010 | 08:42 PM
  #198  
Black_Magic's Avatar
Member
 
Joined: Nov 2008
Posts: 122
one hood strut shipped to 63052?
Old 05-20-2010 | 07:54 PM
  #199  
DozerDave's Avatar
 
Joined: May 2010
Posts: 18
Do you have a left fog light for a 98 left or any that will fit and the left and right black pieces connected to the fog lights? If so how much to throw some ac hoses in also?
Old 05-21-2010 | 07:28 PM
  #200  
matt calder's Avatar
Banned
iTrader: (2)
 
Joined: Jan 2001
Posts: 2,382
i need a drivers side parking light (light that is next to the head light) and potentially a knock sensor from one of the 99's.

How much? I live on long island so i can come and pick them up .

thanks
matt


Quick Reply: FS: six 4th Gen Maximas to Part out



All times are GMT -7. The time now is 04:25 PM.