FS: go fast suspension parts & misc
Let me know what's interesting and I'll post pics -
New - Porterfield (brake supplier) $150 value gift certificate - asking $100 OEM A32 Strut mount isolator and KYB strut bearing $30 Ball joint - Spicer/Raybestos pro grade #505-1261 $15 shipped Lugnuts - 12mx1.25m closed end polished chrome (OEM seat not tuner style) - $10 Nissan shoulder harness pads $5 DEI Cry02 tank, cryogenic kit, 3" Intakes (2) SOLD SuperPro bushings & steering belt SOLD SS Clutch line – NC-210YOR & Bosch #15727 rear O2 sensor SOLD CF Radiator shroud & CustEnt Alum Black Grill Insert SOLD Bosch 3-wire O2 #13242, Eibach wheels studs 35mm SOLD Corbeau seat bracket - driver & passenger Used – A32 USIM Extrude Honed Intake Manifold (Level 1 Upper) $350 OBO (+10hp/6tq) ECU '97 MT OEM $75 Nissan '97 Maxima Service/shop manual - $60 Rear Axle – A32 stock w hubs some rust) $60 pickup only Axle - Nissan OEM driver side half shaft 5sp ABS VLSD $50 Eibach ERS springs - 2.5"diam, 8" long, 380lbs - $50 (linear for coilovers) Eibach ERS springs - 2.5"diam, 7" long, 250lbs - $50 (linear for coilovers) Axle - Nissan OEM driver side half shaft 5sp ABS open diff $30 Maxima.org green vinyl logo on white removable magnet 52"w x 7.5"h x 1/32" thick - best offer Air Intake - OEM stock parts from '97 - $20 Stillen Camber plates, Eibach ERS springs 8"x450lbs -SOLD DEI CryO2 3" Cryogenic Intake, 5th Gen Muffler SOLD CruiseCam headrest camera mount SOLD RSB Stillen & Knockoff, FSTB, RSTB SOLD Stock shifter, control arms, 15mm H&R Wheel Spacers SOLD Bumper support – lightweight A32 aluminum front SOLD Progress Coilovers revalved for stiffer springs (dyno avail) SOLD OEM Y-Pipe SOLD Intake manifold stock – upper & lower |
CF Radiator shroud - TET (Larrio) $40 fits 97-99 shroud detail here pics please..... Dibs on this
|
These prices are shipped?
|
PM SENT.
|
Originally Posted by wirelessdude04
(Post 7404155)
CF Radiator shroud - TET (Larrio) $40 fits 97-99 shroud detail here pics please..... Dibs on this
Shroud pic 2 Shroud pic 3 |
Originally Posted by Coolsaber57
(Post 7404231)
These prices are shipped?
|
bejay my friend's funds are tight he said.... So you can sell it to the next seller.. Thanks though and glws
|
|
the clutch line it goes from where to the slave? pics?
|
Originally Posted by 93altima
(Post 7408570)
the clutch line it goes from where to the slave? pics?
SS clutch line pic1 |
pm sent
|
|
have any pics of the tread corrison on the coilovers? willing to do a deal i have my eyes on alot of your items for sell i will pm you
|
linky no worky....if ya dont mind trying again, and answer my total price with shipping to 30188 question, ill buy that thing off ya |
Originally Posted by threej21
(Post 7414674)
linky no worky....if ya dont mind trying again, and answer my total price with shipping to 30188 question, ill buy that thing off ya
http://carphotos.cardomain.com/ride_...0319_small.jpghttp://carphotos.cardomain.com/ride_...0320_small.jpg |
Got pictures of the progress coilovers? Also what happened to the springs? Will your hypercoil 10' coilover springs work with them?
|
Sorry for the delay in pics. Had to clean them up and find all the pieces.
http://carphotos.cardomain.com/ride_...0327_small.jpg Enlarge http://carphotos.cardomain.com/ride_...0331_small.jpg Enlarge http://carphotos.cardomain.com/ride_...0330_small.jpg Enlarge http://carphotos.cardomain.com/ride_...0329_small.jpg Enlarge http://carphotos.cardomain.com/ride_...0326_small.jpg Enlarge |
Obviously no leaks. You also get lots of misc parts incl 2 slotted strut mounts in great shape, 2 sets of alignment bolts (decent ones good for nearly 2deg camber)
http://carphotos.cardomain.com/ride_...0325_small.jpg Enlarge http://carphotos.cardomain.com/ride_...0328_small.jpg Enlarge Springs have some rusting but are absolutely still within spec. They work fine with the coilovers but 9" is a little closer to Progress OEM spec. http://carphotos.cardomain.com/ride_...0335_small.jpg Enlarge http://carphotos.cardomain.com/ride_...0334_small.jpg Enlarge |
bump lots of stuff still here
|
35 shipped for to 76504 for fan shroud.
|
Shroud sold, O2 sensor added
|
what mods are done to the camber plates? pm sent
|
more stuff added
|
any pics of the stillen RSB?
|
pm sent
|
any pics of tb?
|
Originally Posted by 9maxima5se
(Post 7559899)
any pics of the stillen RSB?
http://carphotos.cardomain.com/ride_...0340_small.jpg Enlarge http://carphotos.cardomain.com/ride_...0339_small.jpg Enlarge http://carphotos.cardomain.com/ride_...0341_small.jpg Enlarge |
Originally Posted by i30dvr
(Post 7565762)
any pics of tb?
http://carphotos.cardomain.com/ride_...0111_small.jpg Enlarge |
|
Are u selling a post cat o2 sensor, and is it a universal or OE type?
|
Originally Posted by VANGtastic97
(Post 7578661)
Are u selling a post cat o2 sensor, and is it a universal or OE type?
http://www.sparkplugs.com/services/i...150&height=200 |
Originally Posted by BEJAY1
(Post 7403996)
Progress Coilovers – no springs, revalved for stiffer springs (dyno avail). Much rust/thread corrosion but they work great) $500
Originally Posted by BEJAY1
(Post 7403996)
Stillen Camber plates rebuilt and working $250
Rear Anti-Sway Bar – Stillen 304200 Fits 95-03 (brackets & bolts corroded a bit but work fine) $100 (sale pending) BTW, I can pick-up da parts. |
Bump coilovers and more still available. Need gas money.
|
Is the RSB available?
|
both RSB's, Camera mount, 5mm spacers gone. Found some 15mm spacers!
|
Somewhat Interested ^^
|
Spacers are gone, found another seat bracket
|
Cry02 added (30% off dealer price), and 3 more set's of springs found
|
Stillen plates
|
intake manifold & throttle body added.
|
All times are GMT -7. The time now is 02:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands