FS: go fast suspension parts & misc
#1
FS: go fast suspension parts & misc
Let me know what's interesting and I'll post pics -
New - Porterfield (brake supplier) $150 value gift certificate - asking $100
OEM A32 Strut mount isolator and KYB strut bearing $30
Ball joint - Spicer/Raybestos pro grade #505-1261 $15 shipped
Lugnuts - 12mx1.25m closed end polished chrome (OEM seat not tuner style) - $10
Nissan shoulder harness pads $5
DEI Cry02 tank, cryogenic kit, 3" Intakes (2) SOLD
SuperPro bushings & steering belt SOLD
SS Clutch line – NC-210YOR & Bosch #15727 rear O2 sensor SOLD
CF Radiator shroud & CustEnt Alum Black Grill Insert SOLD
Bosch 3-wire O2 #13242, Eibach wheels studs 35mm SOLD
Corbeau seat bracket - driver & passenger
Used –
A32 USIM Extrude Honed Intake Manifold (Level 1 Upper) $350 OBO (+10hp/6tq)
ECU '97 MT OEM $75
Nissan '97 Maxima Service/shop manual - $60
Rear Axle – A32 stock w hubs some rust) $60 pickup only
Axle - Nissan OEM driver side half shaft 5sp ABS VLSD $50
Eibach ERS springs - 2.5"diam, 8" long, 380lbs - $50 (linear for coilovers)
Eibach ERS springs - 2.5"diam, 7" long, 250lbs - $50 (linear for coilovers)
Axle - Nissan OEM driver side half shaft 5sp ABS open diff $30
Maxima.org green vinyl logo on white removable magnet 52"w x 7.5"h x 1/32" thick - best offer
Air Intake - OEM stock parts from '97 - $20
Stillen Camber plates, Eibach ERS springs 8"x450lbs -SOLD
DEI CryO2 3" Cryogenic Intake, 5th Gen Muffler SOLD
CruiseCam headrest camera mount SOLD
RSB Stillen & Knockoff, FSTB, RSTB SOLD
Stock shifter, control arms, 15mm H&R Wheel Spacers SOLD
Bumper support – lightweight A32 aluminum front SOLD
Progress Coilovers revalved for stiffer springs (dyno avail) SOLD
OEM Y-Pipe SOLD
Intake manifold stock – upper & lower
New - Porterfield (brake supplier) $150 value gift certificate - asking $100
OEM A32 Strut mount isolator and KYB strut bearing $30
Ball joint - Spicer/Raybestos pro grade #505-1261 $15 shipped
Lugnuts - 12mx1.25m closed end polished chrome (OEM seat not tuner style) - $10
Nissan shoulder harness pads $5
DEI Cry02 tank, cryogenic kit, 3" Intakes (2) SOLD
SuperPro bushings & steering belt SOLD
SS Clutch line – NC-210YOR & Bosch #15727 rear O2 sensor SOLD
CF Radiator shroud & CustEnt Alum Black Grill Insert SOLD
Bosch 3-wire O2 #13242, Eibach wheels studs 35mm SOLD
Corbeau seat bracket - driver & passenger
Used –
A32 USIM Extrude Honed Intake Manifold (Level 1 Upper) $350 OBO (+10hp/6tq)
ECU '97 MT OEM $75
Nissan '97 Maxima Service/shop manual - $60
Rear Axle – A32 stock w hubs some rust) $60 pickup only
Axle - Nissan OEM driver side half shaft 5sp ABS VLSD $50
Eibach ERS springs - 2.5"diam, 8" long, 380lbs - $50 (linear for coilovers)
Eibach ERS springs - 2.5"diam, 7" long, 250lbs - $50 (linear for coilovers)
Axle - Nissan OEM driver side half shaft 5sp ABS open diff $30
Maxima.org green vinyl logo on white removable magnet 52"w x 7.5"h x 1/32" thick - best offer
Air Intake - OEM stock parts from '97 - $20
Stillen Camber plates, Eibach ERS springs 8"x450lbs -SOLD
DEI CryO2 3" Cryogenic Intake, 5th Gen Muffler SOLD
CruiseCam headrest camera mount SOLD
RSB Stillen & Knockoff, FSTB, RSTB SOLD
Stock shifter, control arms, 15mm H&R Wheel Spacers SOLD
Bumper support – lightweight A32 aluminum front SOLD
Progress Coilovers revalved for stiffer springs (dyno avail) SOLD
OEM Y-Pipe SOLD
Intake manifold stock – upper & lower
Last edited by BEJAY1; 09-12-2011 at 05:12 AM.
#8
Last edited by BEJAY1; 02-08-2010 at 06:11 AM.
#10
Guess I have the short line - price dropped to $20
SS clutch line pic1
SS clutch line pic1
#12
Last edited by BEJAY1; 02-10-2010 at 06:10 AM.
#14
linky no worky....if ya dont mind trying again, and answer my total price with shipping to 30188 question, ill buy that thing off ya
#15
#18
Obviously no leaks. You also get lots of misc parts incl 2 slotted strut mounts in great shape, 2 sets of alignment bolts (decent ones good for nearly 2deg camber)
Enlarge
Enlarge
Springs have some rusting but are absolutely still within spec. They work fine with the coilovers but 9" is a little closer to Progress OEM spec.
Enlarge
Enlarge
Enlarge
Enlarge
Springs have some rusting but are absolutely still within spec. They work fine with the coilovers but 9" is a little closer to Progress OEM spec.
Enlarge
Enlarge
Last edited by BEJAY1; 02-17-2010 at 06:36 PM.
#27
Here you go. I even have a box that fits both if anybody wants a deal on 2! The Stillen has wear where it rubbed the lateral link but it's sound structurally. Think of it as extra clearance. I actually preferred the knockoff myself as it weighed more and I assumed it a bit stiffer. OMG - just saw these things are running $500 shipped on ebay!
Enlarge
Enlarge
Enlarge
Enlarge
Enlarge
Enlarge
Last edited by BEJAY1; 05-19-2010 at 06:19 PM.
#32
BTW, I can pick-up da parts.