Looking For: AC compressor discharge line
#3
Not sure what it goes to... back in 2006, I bought a bunch of parts. I think they came from a 1996 Maxima?? I cut the line and used the aluminum tube part that bolts to the high side of the compressor. I attached my own line to it.
While trying to bend it a little bit to make room for my SC, I snapped it. The one I had comes up out of the compressor for 1/2 inch, makes 1 90deg bend toward the back of the compressor, then bends down, and loops back up.
I actually need a line that will come straight up and run in the same direction as the low side (next to the AC "muffler" canister). I am going to try and bend it again (and not crack it this time). I am not sure the year/applications is a critical as that it fits properly in to the compressor since I will be modifying it anyway.
How much to ship it to 07726?
Thanks
While trying to bend it a little bit to make room for my SC, I snapped it. The one I had comes up out of the compressor for 1/2 inch, makes 1 90deg bend toward the back of the compressor, then bends down, and loops back up.
I actually need a line that will come straight up and run in the same direction as the low side (next to the AC "muffler" canister). I am going to try and bend it again (and not crack it this time). I am not sure the year/applications is a critical as that it fits properly in to the compressor since I will be modifying it anyway.
How much to ship it to 07726?
Thanks
#4
Well the fittings for the compressor are different on the 95-96 and 97-99. I take it this is for a car with a swapped VQ? $25 shipped for a 95-96 high side line that runs from the compressor to the condensor.
#5
#7
#9
Based on what I am seeing, the 96 style has the line come out of the side of the fitting (90 deg to the compressor), where the 98 style has the line come straight out, THEN it bends. is this correct?
My line comes straight out, then bends.
I was not able to get the model number off the compressor... Do you think this is enough information to go by to confirm which line I need?
Thanks
My line comes straight out, then bends.
I was not able to get the model number off the compressor... Do you think this is enough information to go by to confirm which line I need?
Thanks
#11
This is a pic of the 95-96 line.
http://i235.photobucket.com/albums/e...ckford/017.jpg
I can get a pic of the 97-99 line when I head to my shop but it looks like you need the 97-99 line.
http://i235.photobucket.com/albums/e...ckford/017.jpg
I can get a pic of the 97-99 line when I head to my shop but it looks like you need the 97-99 line.
#12
I looked at my 97 parts car and the line was the same shape as the 95-96 line just with the different size fitting. It took some digging in my shop but I think I found the line you need. It fits the 97-99 compressor and has the line coming out the top.
http://i235.photobucket.com/albums/e...ckford/002.jpg
http://i235.photobucket.com/albums/e...ckford/002.jpg
#13
I looked at my 97 parts car and the line was the same shape as the 95-96 line just with the different size fitting. It took some digging in my shop but I think I found the line you need. It fits the 97-99 compressor and has the line coming out the top.
http://i235.photobucket.com/albums/e...ckford/002.jpg
http://i235.photobucket.com/albums/e...ckford/002.jpg
How do we proceed?
#14
PayPal works best at maximajoe@cableone.net
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
doctorpullit
8th Generation Maxima (2016-)
60
12-12-2015 09:39 AM
Dennis Twohy
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
0
10-01-2015 06:01 PM