NY Wilwood BBK for sale!
11-28-2010, 06:41 AM
#1
Member
Thread Starter
Join Date: May 2009
Posts: 144
Wilwood BBK for sale!
As Title says. Im selling my BBK for a 4th gen.
These was orginally another members bbk. Kit has less then 3k miles on them from other owner and since i never installed them after buying. Was in my closet since he started parting out his mods. Which been months.
The relocation brackets were made by vsamoylov from nycmaximas.org and they are made out of 6061 aircraft grade aluminum. They are made to be used with 6th gen maxima 12.6 inch rotors. NO Pad overhang and it is a direct bolt on, meaning no shims or washers needed.
The brake pads that are used are Wilwood BP-10 street pads (same level as Hawk HPS pads)
The Stainless Steel Lines are Authentic Wilwood lines.
The calipers are Authentic Wilwood FSL 4 piston calipers.
Kit consist of:
1. Two rotors.
2. Wilwood SS brake lines.
3. Four brake pads from wilwood.
4. Two 4th gen relocation brackets.
5. Wilwood calipers.
Price: $475 taken right to your door step in westchester/bx/bk/qnz/manhanttan area/20mins into jersey and thats it.
Pics:
All you got to do is clean them up a bit and take off the surface rust off.
I would really like to sell these local. I would go as far as Allentown, PA.
Anywhere else you would have to pay for shipping.
Thank you.
Edit: I never set my cams date so pictures are recent.
These was orginally another members bbk. Kit has less then 3k miles on them from other owner and since i never installed them after buying. Was in my closet since he started parting out his mods. Which been months.
The relocation brackets were made by vsamoylov from nycmaximas.org and they are made out of 6061 aircraft grade aluminum. They are made to be used with 6th gen maxima 12.6 inch rotors. NO Pad overhang and it is a direct bolt on, meaning no shims or washers needed.
The brake pads that are used are Wilwood BP-10 street pads (same level as Hawk HPS pads)
The Stainless Steel Lines are Authentic Wilwood lines.
The calipers are Authentic Wilwood FSL 4 piston calipers.
Kit consist of:
1. Two rotors.
2. Wilwood SS brake lines.
3. Four brake pads from wilwood.
4. Two 4th gen relocation brackets.
5. Wilwood calipers.
Price: $475 taken right to your door step in westchester/bx/bk/qnz/manhanttan area/20mins into jersey and thats it.
Pics:
All you got to do is clean them up a bit and take off the surface rust off.
I would really like to sell these local. I would go as far as Allentown, PA.
Anywhere else you would have to pay for shipping.
Thank you.
Edit: I never set my cams date so pictures are recent.
11-30-2010, 08:02 PM
#9
BBK
Hey, these are direct bolt on correct? I dont need any hubcentric rings or anything like that for my 4th gen (as with other BBKs).
How much life do the pads and the rotors have left on them?
I'm down in MD, but my parents live in Union, NJ so we could meet up somewhere around there...I come back every weekend or so...
How much life do the pads and the rotors have left on them?
I'm down in MD, but my parents live in Union, NJ so we could meet up somewhere around there...I come back every weekend or so...
12-01-2010, 06:05 PM
#10
Member
Thread Starter
Join Date: May 2009
Posts: 144
Kit has less then 3k miles on them from other owner and since i never installed them after buying. Was in my closet since he started parting out his mods. Which been months.
The relocation brackets were made by vsamoylov from nycmaximas.org and they are made out of 6061 aircraft grade aluminum. They are made to be used with 6th gen maxima 12.6 inch rotors. NO Pad overhang and it is a direct bolt on, meaning no shims or washers needed.
LMK what you want to do if u want them.
The relocation brackets were made by vsamoylov from nycmaximas.org and they are made out of 6061 aircraft grade aluminum. They are made to be used with 6th gen maxima 12.6 inch rotors. NO Pad overhang and it is a direct bolt on, meaning no shims or washers needed.
LMK what you want to do if u want them.
01-19-2011, 03:42 PM
#20
Member
Thread Starter
Join Date: May 2009
Posts: 144
Sorry fellas for seeing this so late. Didnt think anyone replied. Not sure of name brand of rotors (sure you can use ur choice). but they are slotted 12.6 rotors. Same size as 6th gen rotors.
I can knock off 25$ if picked up in brooklyn ny.(long story short my license got suspended).
I can knock off 25$ if picked up in brooklyn ny.(long story short my license got suspended).
05-06-2011, 07:04 AM
#33
Member
Thread Starter
Join Date: May 2009
Posts: 144
Still for sale. This is for 4th GEN! as description says. If you want you can buy them and find out if they fit but im posting this for 4th gens. This i know for sure goes for them.
As for the z32 wheels. i believe they can only go over 17s.
As for the z32 wheels. i believe they can only go over 17s.
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
maxima-junky
4th Generation Classifieds (1995-1999)
1
10-07-2015 06:13 PM