FL Complete 00VI setup + extras
#1
Thread Starter
My axles cry for mercy...
iTrader: (5)
Joined: Jul 2006
Posts: 1
From: Boynton Beach, FL
FS: Complete 00VI setup + extras
Like the title says, I have a complete 00VI setup for sale and here's what you get:
-2000 upper IM with removed power rod for a smoother power band and more top end power.
-2000 Lower IM. (no butterfly valves)
-2000 Throttle body
-2000 TPS (with pigtails)
-2000 IACV (with pigtail)
-Complete fuel rail with both fuel dampeners
-injectors (6)
-injector clips (6)
-injector pigtails (6)
-2000 rear valve cover
-every single bolt, nut, washer, shim, etc. you need to make this a bolt on affair.
If you happen to want the power rod in the upper intake manifold, I can throw that in the package along with the cup at no extra cost. If you want a working VIAS, I may consider taking my personal IM off my car and selling it with the kit, but the cost will be extra and I will only do this if I have time.
Nothing on this kit is broken. All the vacum nipples are still perfectly intact. The only thing you need to do is block the EGR. The original gaskets are still on the parts and dont look too bad at all. But I would still recomend that you replace them all while you have the car torn apart.
I am asking $350 O.B.O I would really like a local sale, but if I absolutely have to ship it, I will consider it. Shipping will be extra of course.
And before anyone says "its not complete because there are no coilpacks", 4th gen coilpacks work just fine. I'm currently using them in my personal car for the rear bank also.
^removed power rod
-2000 upper IM with removed power rod for a smoother power band and more top end power.
-2000 Lower IM. (no butterfly valves)
-2000 Throttle body
-2000 TPS (with pigtails)
-2000 IACV (with pigtail)
-Complete fuel rail with both fuel dampeners
-injectors (6)
-injector clips (6)
-injector pigtails (6)
-2000 rear valve cover
-every single bolt, nut, washer, shim, etc. you need to make this a bolt on affair.
If you happen to want the power rod in the upper intake manifold, I can throw that in the package along with the cup at no extra cost. If you want a working VIAS, I may consider taking my personal IM off my car and selling it with the kit, but the cost will be extra and I will only do this if I have time.
Nothing on this kit is broken. All the vacum nipples are still perfectly intact. The only thing you need to do is block the EGR. The original gaskets are still on the parts and dont look too bad at all. But I would still recomend that you replace them all while you have the car torn apart.
I am asking $350 O.B.O I would really like a local sale, but if I absolutely have to ship it, I will consider it. Shipping will be extra of course.
And before anyone says "its not complete because there are no coilpacks", 4th gen coilpacks work just fine. I'm currently using them in my personal car for the rear bank also.
^removed power rod
Last edited by essential1; 01-08-2011 at 01:31 PM.
#2
Thread Starter
My axles cry for mercy...
iTrader: (5)
Joined: Jul 2006
Posts: 1
From: Boynton Beach, FL
I also have a few more parts lying here that some might be interested in.
3.5 Upper and lower IM. $180 shipped for both.
3.5 fuel rail. $40 shipped
1st gen VQ35 cams and bolts. $100 shipped
I will take $275 shipped if someone wants all three of the above listings all together.
3.5 Upper and lower IM. $180 shipped for both.
3.5 fuel rail. $40 shipped
1st gen VQ35 cams and bolts. $100 shipped
I will take $275 shipped if someone wants all three of the above listings all together.
Last edited by essential1; 01-08-2011 at 01:29 PM.
#11
hey man. im planning the vi swap with some friends in fall. and u have everything i need. i live in canada (quebec). can u hold on it a bit for me? obviously if u find local buyer..i would understand it saves u the shippin issues. keep in touch. take care. I have a low post count but it doesnt question my reliability. people working on it with me are VQ'ed and 97roadrunner
Thread
Thread Starter
Forum
Replies
Last Post
tarun900
4th Generation Maxima (1995-1999)
19
12-20-2021 06:57 PM
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM