MA FS: Cattman Y-Pipe, Complete 00vi kit
01-26-2011, 08:45 AM
#1
FS: Cattman Y-Pipe, Complete 00vi kit
I have for sale a cattman y-pipe. It was bought from maxima.org member cfiggs about a year ago and I had it on my car for about a month before taking it off and selling my old maxima. Asking SOLD obo. Local pick up is PREFERRED
I will be putting pics up later on today around 5:30 EST when I get home from class.
The hanger at the end of the pipe is so it doesn't sag and break at the flex section. It uses factory mounting points.
I also have for sale an 00vi kit which was purchased from maxima.org member shadyonedeath here - http://forums.maxima.org/4th-generat...00vi-sale.html
I never had a chance to install it, it's still sitting in the corner of my house in the original box I received it in. I WILL NOT BE PARTING IT OUT!!!
SOLD
includes:
1. upper manifold - drilled/tapped for brass barbed fittings.
2. Lower manifold (4th gen - raw)
3. Throttle Body (5th gen w/ 5th gen IACV)
4. rear coil packs (5th gen)
5. rear Valve Cover (5th gen)
6. MSD window switch
7. EGR block plate w/fitting for #8
8. IACV adapter w/fitting for #7
9. VIAS
Not numbered - Brass barbed fittings
I will be putting pics up later on today around 5:30 EST when I get home from class.
The hanger at the end of the pipe is so it doesn't sag and break at the flex section. It uses factory mounting points.
I also have for sale an 00vi kit which was purchased from maxima.org member shadyonedeath here - http://forums.maxima.org/4th-generat...00vi-sale.html
I never had a chance to install it, it's still sitting in the corner of my house in the original box I received it in. I WILL NOT BE PARTING IT OUT!!!
SOLD
includes:
1. upper manifold - drilled/tapped for brass barbed fittings.
2. Lower manifold (4th gen - raw)
3. Throttle Body (5th gen w/ 5th gen IACV)
4. rear coil packs (5th gen)
5. rear Valve Cover (5th gen)
6. MSD window switch
7. EGR block plate w/fitting for #8
8. IACV adapter w/fitting for #7
9. VIAS
Not numbered - Brass barbed fittings
Last edited by L2theBR; 03-22-2011 at 10:28 PM.
01-26-2011, 06:44 PM
#4
Sorry it was snowing pretty bad earlier so I got snowed in at my girls house. Posting pics in about 10 minutes.
Also, it's a fed spec pipe.
Edit: Pics are up. If anyone wants any specific/more detailed photos just let me know.
Also, it's a fed spec pipe.
Edit: Pics are up. If anyone wants any specific/more detailed photos just let me know.
Last edited by L2theBR; 01-26-2011 at 07:06 PM.
01-31-2011, 11:39 AM
#19
at the moment yes it is, and im located at 02723. if its a local pickup i would be willing to drive a bit to meet you.
EDIT: At the moment the best way to contact me is via e-mail: L2theBR@gmail.com or to text my phone @ 774-451-7868
EDIT: At the moment the best way to contact me is via e-mail: L2theBR@gmail.com or to text my phone @ 774-451-7868
Last edited by L2theBR; 01-31-2011 at 01:14 PM.
03-02-2011, 01:43 PM
#35
4th gen Lower intake manifold that does not have the screw holes for attaching the 5th gen upper intake manifold drilled and tapped.
P.S. If you don't sell it quickly, don't part it out. I'm going to be selling my Max and then buying another Max (a manual this time)
So I will be putting an 00vi on that as well. My max is going on market tomorrow. So if it sells quickly I'll be buying it from you....
P.S. If you don't sell it quickly, don't part it out. I'm going to be selling my Max and then buying another Max (a manual this time)
So I will be putting an 00vi on that as well. My max is going on market tomorrow. So if it sells quickly I'll be buying it from you....
Last edited by silencecalls; 03-02-2011 at 01:47 PM.
03-02-2011, 01:47 PM
#36
03-04-2011, 02:29 PM
#40