PA DEK LIM with the swirl valves removed
#1
DEK LIM with the swirl valves removed
Ok, I am selling my dek lim for 50.00+shipping. I removed the swirl valves and had the two holes tig welded closed. I was unable to get one of the set screws out for a piece of the rod so I cut it and grind it flush. All of the runners have been lightly ported to remove casting marks and flaws. Great for someone that is boosted or with an extended rev limiter with a 00vi swap.
Here are some pic's if you have any questions let me know
Here are some pic's if you have any questions let me know
#6
Not sure what you mean?
If you using a dek upper and lower this will work, if your using a de lower than no. I have a de lower with the casting marks removed and lightly ported that I an keeping for myself but for the right price everything is forsale
If you using a dek upper and lower this will work, if your using a de lower than no. I have a de lower with the casting marks removed and lightly ported that I an keeping for myself but for the right price everything is forsale
Thread
Thread Starter
Forum
Replies
Last Post
TKHanson
5th Generation Maxima (2000-2003)
6
11-24-2018 01:39 AM
tseng1023
5th Generation Classifieds (2000-2003)
3
10-15-2015 08:30 AM
hayne
6th Generation Maxima (2004-2008)
2
10-05-2015 11:53 AM
RealityCheck
4th Generation Maxima (1995-1999)
7
10-02-2015 06:34 PM