do you have fogs? and all necessary hardware and wiring? can you PM pics and price shipped to 85037?

 

Monday bump

 

Who wants parts?

 

do you have the jack tools in the car? How much shipped to 79416?

 

Yes $15 shipped

 

^^^^^^^^^^^^^^^^^^^^

 

front right ABS wheel sensor removable without frickin it up like I did?
to 81601?

 

how much ya want for the IAC if its any good... shipped to 39759

 

do you have any shift forks by any chance?

 

I think I have one but will have to check. I would have to sell it with the hub/spindle though. As you found out you can't remove them without damaging them.

I do believe the 99 is different.


By shift fork your referring to the transmission internals? If so I don't.

 

joe do you only specialize in 4th gens? i need 01 parts !

 

Sorry it's only fourth gens at the moment. That may change in the future though.

 

do you have a working Vacuum Cut Valve Bypass Valve?
Whats the price shipped to 11581? Or whats the price for all evap sensors shipped to 11581?

Tx

 

$20 shipped for the VCVBV. There's so many sensors and parts to the evap system that I would need to know names of the ones you wanted.

 

i think you're right but my motor was out of a 98.. promise

 

sorry for being lazy, please quote me on the following

Vacuum Cut Valve Bypass Valve
Evap Vent Control Valve
Evap Pressure Sensor
Vacuum Cut Valve


Please PM or reply with Paypal info.

Thank you very much.

 

shift fork as in the thing that the slave cylinder pushes on (i think thats called a fork as well? i could be wrong)

 

So are you using a 95-98 intake manifold and throttle body? If your sure the 95-98 IACV is what you need then $30 shipped


PM sent

 

That would be the clutch fork. That was sold to a local friend.

 

^^^^^^^^^^^^^^

 

^^^^^^^^^^^^^^^^

 

Friday bump

 

All needles work on the gauge cluster? If so, I am taking it for a friend.

 

BUMPPPPPPPPPPPPPPPP

 

Would happen to have the rear license plate light bracket?

 

I have one but the bracket is rusty. Another MN winter and it probably wouldnt be any good. Theres a pic in my main photobucket album.

 

BUMPPPPPPPPPPPPPP

 

LOTS OF PARTS LEFT

 

do u still have to keys to the car? i need the entire lock set and ignition part of the car including the trunk lock. how much to shipped it to 19120?

 

Yes I do. I know every lock works other then the glove box. I haven't tried to lock it yet but I'm sure it will work. $100 shipped for the entire set.

 

Hi There,I need drive side mirror(Heated) $$$ Shipped to 07080..THANKS!

 

I still have plenty of parts. Most of the manual swap parts are still there.

 

Still plenty of parts here. I want to sell as much as I can before tearing the car down. I don't want to store any parts from this car.

 

Monday morning bump for parts. Lets make some room for another parts car.

 

do you have the rear license plate light plug how much shipped to 66441

here is what i need, the entire set
http://www.nissanpartszone.com/diagr...amp-266001.png

 

I know it's been a while but you wouldn't happen to have the power antenna unit?

 

Tried to send pm, but ur box is full

 

I just checked PM only had 3, deleted them, do know why it says full?

 

Just checked pm only 3 msgs, deleted them, dont know why saying full

 

Sorry guys deleting some pms now.